search

home-assistant / core

:house_with_garden: Open source home automation that puts local control and privacy first.
https://www.home-assistant.io
Apache License 2.0
74.07k stars 31.09k forks source link

integration balboa doesn't update status and shows wrong climate state ... #129291

Open stefancn opened 1 month ago

stefancn commented 1 month ago

The problem

Hi !

I have a BP2100G1 with TP700 and find some issues so far:

1) The integr. doesn't update the temp automatically, have to start a pump motor to update ... 2) The Climate show's heat and is orange even of the SPA doesn't heat ...

What version of Home Assistant Core has the issue?

2024.10.4

What was the last working version of Home Assistant Core?

No response

What type of installation are you running?

Home Assistant OS

Integration causing the issue

Balboa Spa Client

Link to integration documentation on our website

No response

Diagnostics information

No response

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

home-assistant[bot] commented 1 month ago

Hey there @garbled1, @natekspencer, mind taking a look at this issue as it has been labeled with an integration (balboa) you are listed as a code owner for? Thanks!

Code owner commands Code owners of `balboa` can trigger bot actions by commenting: - `@home-assistant close` Closes the issue. - `@home-assistant rename Awesome new title` Renames the issue. - `@home-assistant reopen` Reopen the issue. - `@home-assistant unassign balboa` Removes the current integration label and assignees on the issue, add the integration domain after the command. - `@home-assistant add-label needs-more-information` Add a label (needs-more-information, problem in dependency, problem in custom component) to the issue. - `@home-assistant remove-label needs-more-information` Remove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.

(message by CodeOwnersMention)

balboa documentation balboa source (message by IssueLinks)

natekspencer commented 1 month ago

What your describing is the way the device works normally while in the rest state. Until you start a pump, which sets the spa to "ready-in-rest" mode, or switch to ready mode where it will try to maintain the temperature all the time, the device doesn't measure and report the temperature.

stefancn commented 1 month ago

Ok, thank for fast response, much appreciated, but I have the filter cycle 1 on for 24 hours , so it should not be in restmode. (I can see the temp changing and requested heater to be turned on / off in the Climate device). But unfortunately the integr. doesn't save anything in the logbook. Can that be fixed ?

Regards ...

//Stefan