Closed drthanwho closed 3 years ago
Hm, not sure where this is coming from, definitely not from OS: There is no crond
on OS.... This is likely caused by one of the addons.
Damn! It's going to be a pain to work out which one. Likely it doesn't interfere with anything
Since this is most likely an add-on thing I'll close this for now. You can still reopen if it turns out that it needs some fix/change on OS level.
Hardware Environment
Home Assistant OS release:
Journal logs:
``` Aug 29 10:08:07 homeassistant c34f1853ef42[471]: 21-08-29 13:08:07 INFO (MainThread) [supervisor.host.control] Initialize host reboot using logind Aug 29 10:08:07 homeassistant hassos-supervisor[965]: 21-08-29 13:08:07 INFO (MainThread) [supervisor.host.control] Initialize host reboot using logind Aug 29 10:08:07 homeassistant hassos-supervisor[965]: 21-08-29 13:08:07 INFO (MainThread) [supervisor.addons] Phase 'AddonStartup.APPLICATION' stopping 5 add-ons Aug 29 10:08:07 homeassistant c34f1853ef42[471]: 21-08-29 13:08:07 INFO (MainThread) [supervisor.addons] Phase 'AddonStartup.APPLICATION' stopping 5 add-ons Aug 29 10:08:07 homeassistant c34f1853ef42[471]: 21-08-29 13:08:07 INFO (SyncWorker_2) [supervisor.docker.interface] Stopping addon_15ef4d2f_esphome application Aug 29 10:08:07 homeassistant hassos-supervisor[965]: 21-08-29 13:08:07 INFO (SyncWorker_2) [supervisor.docker.interface] Stopping addon_15ef4d2f_esphome application Aug 29 10:08:07 homeassistant d70cc4e43b99[471]: [cont-finish.d] executing container finish scripts... Aug 29 10:08:07 homeassistant d70cc4e43b99[471]: [cont-finish.d] 99-message.sh: executing... Aug 29 10:08:07 homeassistant d70cc4e43b99[471]: [cont-finish.d] 99-message.sh: exited 0. Aug 29 10:08:07 homeassistant d70cc4e43b99[471]: [cont-finish.d] done. Aug 29 10:08:07 homeassistant d70cc4e43b99[471]: [s6-finish] waiting for services. Aug 29 10:08:07 homeassistant d70cc4e43b99[471]: [s6-finish] sending all processes the TERM signal. Aug 29 10:08:08 homeassistant dockerd[471]: time="2021-08-29T10:08:08.002331656Z" level=info msg="ignoring event" container=d70cc4e43b99f17f558ecce9a525607b20306fc82a431cd25ba4ce4fd7da7b04 module=libcontainerd namespace=moby topic=/tasks/delete type="*events.TaskDelete" Aug 29 10:08:08 homeassistant dockerd[478]: time="2021-08-29T10:08:08.004144945Z" level=info msg="shim disconnected" id=d70cc4e43b99f17f558ecce9a525607b20306fc82a431cd25ba4ce4fd7da7b04 Aug 29 10:08:08 homeassistant dockerd[478]: time="2021-08-29T10:08:08.004348810Z" level=error msg="copy shim log" error="read /proc/self/fd/94: file already closed" Aug 29 10:08:08 homeassistant systemd[1]: var-lib-docker-overlay2-d838f7751208602b6b8e38929fd60aecc0544b7772f281eaf36a81016362ce08-merged.mount: Succeeded. Aug 29 10:08:08 homeassistant systemd[1]: mnt-data-docker-overlay2-d838f7751208602b6b8e38929fd60aecc0544b7772f281eaf36a81016362ce08-merged.mount: Succeeded. Aug 29 10:08:08 homeassistant hassos-supervisor[965]: 21-08-29 13:08:08 INFO (SyncWorker_2) [supervisor.docker.interface] Cleaning addon_15ef4d2f_esphome application Aug 29 10:08:08 homeassistant c34f1853ef42[471]: 21-08-29 13:08:08 INFO (SyncWorker_2) [supervisor.docker.interface] Cleaning addon_15ef4d2f_esphome application Aug 29 10:08:08 homeassistant c34f1853ef42[471]: 21-08-29 13:08:08 INFO (SyncWorker_3) [supervisor.docker.interface] Stopping addon_a0d7b954_wireguard application Aug 29 10:08:08 homeassistant hassos-supervisor[965]: 21-08-29 13:08:08 INFO (SyncWorker_3) [supervisor.docker.interface] Stopping addon_a0d7b954_wireguard application Aug 29 10:08:08 homeassistant 7245c882d5aa[471]: [cont-finish.d] executing container finish scripts... Aug 29 10:08:08 homeassistant 7245c882d5aa[471]: [cont-finish.d] 99-message.sh: executing... Aug 29 10:08:08 homeassistant 7245c882d5aa[471]: [cont-finish.d] 99-message.sh: exited 0. Aug 29 10:08:08 homeassistant 7245c882d5aa[471]: [cont-finish.d] done. Aug 29 10:08:08 homeassistant 7245c882d5aa[471]: [s6-finish] waiting for services. Aug 29 10:08:08 homeassistant 7245c882d5aa[471]: [s6-finish] sending all processes the TERM signal. Aug 29 10:08:11 homeassistant bbb323cfec65[471]: 13:08:11:026 ZCL attribute report 0x7CB03EAA0A036C11 for cluster: 0x0008, ep: 0x03, frame control: 0x18, mfcode: 0x0000 Aug 29 10:08:11 homeassistant 7245c882d5aa[471]: [s6-finish] sending all processes the KILL signal and exiting. Aug 29 10:08:11 homeassistant dockerd[471]: time="2021-08-29T10:08:11.884166537Z" level=info msg="ignoring event" container=7245c882d5aaa413a247ce142dd33e6ca7e42465e837943c7e0af0525d93ee19 module=libcontainerd namespace=moby topic=/tasks/delete type="*events.TaskDelete" Aug 29 10:08:11 homeassistant dockerd[478]: time="2021-08-29T10:08:11.886378946Z" level=info msg="shim disconnected" id=7245c882d5aaa413a247ce142dd33e6ca7e42465e837943c7e0af0525d93ee19 Aug 29 10:08:11 homeassistant dockerd[478]: time="2021-08-29T10:08:11.887760967Z" level=error msg="copy shim log" error="read /proc/self/fd/98: file already closed" Aug 29 10:08:11 homeassistant audit[20876]: NETFILTER_CFG table=nat family=2 entries=45 op=xt_replace pid=20876 subj==unconfined comm="iptables" Aug 29 10:08:11 homeassistant kernel: audit: type=1325 audit(1630231691.901:347): table=nat family=2 entries=45 op=xt_replace pid=20876 subj==unconfined comm="iptables" Aug 29 10:08:11 homeassistant audit[20878]: NETFILTER_CFG table=filter family=2 entries=45 op=xt_replace pid=20878 subj==unconfined comm="iptables" Aug 29 10:08:11 homeassistant kernel: audit: type=1325 audit(1630231691.945:348): table=filter family=2 entries=45 op=xt_replace pid=20878 subj==unconfined comm="iptables" Aug 29 10:08:11 homeassistant audit[20880]: NETFILTER_CFG table=nat family=2 entries=44 op=xt_replace pid=20880 subj==unconfined comm="iptables" Aug 29 10:08:12 homeassistant kernel: audit: type=1325 audit(1630231691.977:349): table=nat family=2 entries=44 op=xt_replace pid=20880 subj==unconfined comm="iptables" Aug 29 10:08:12 homeassistant kernel: hassio: port 16(veth9f6d5ab) entered disabled state Aug 29 10:08:12 homeassistant kernel: vethbd0ed0d: renamed from eth0 Aug 29 10:08:12 homeassistant NetworkManager[342]:Kernel logs:
``` [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.17-v8 (builder@55201e6825da) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot -gf358c8ba-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Jul 28 22:55:05 UTC 2021 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 256 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] On node 0 totalpages: 1012480 [ 0.000000] DMA zone: 3788 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242432 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12032 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 32 pages/cpu s91352 r8192 d31528 u131072 [ 0.000000] pcpu-alloc: s91352 r8192 d31528 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996660 [ 0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor rootwait systemd.machine_id=14866f9f79684ddda7939eb117880db9 cgroup_enable=memory fsck.repair=yes coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:A5:74:20 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 usb-storage.quirks=152d:0578:u dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro rauc.slot=A [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000037300000-0x000000003b300000] (64MB) [ 0.000000] Memory: 3814556K/4049920K available (12096K kernel code, 1962K rwdata, 4160K rodata, 3840K init, 1261K bss, 169828K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39239 entries in 154 pages [ 0.000000] ftrace: allocated 154 pages with 4 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000260] Console: colour dummy device 80x25 [ 0.000819] printk: console [tty1] enabled [ 0.000879] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000922] pid_max: default: 32768 minimum: 301 [ 0.001072] LSM: Security Framework initializing [ 0.001196] AppArmor: AppArmor initialized [ 0.001413] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001490] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004605] rcu: Hierarchical SRCU implementation. [ 0.005628] EFI services will not be available. [ 0.006144] smp: Bringing up secondary CPUs ... [ 0.007139] Detected PIPT I-cache on CPU1 [ 0.007211] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.008375] Detected PIPT I-cache on CPU2 [ 0.008421] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.009507] Detected PIPT I-cache on CPU3 [ 0.009553] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.009702] smp: Brought up 1 node, 4 CPUs [ 0.009791] SMP: Total of 4 processors activated. [ 0.009815] CPU features: detected: 32-bit EL0 Support [ 0.009839] CPU features: detected: CRC32 instructions [ 0.009863] CPU features: detected: 32-bit EL1 Support [ 0.047346] CPU: All CPU(s) started at EL2 [ 0.047431] alternatives: patching kernel code [ 0.049011] devtmpfs: initialized [ 0.059700] Enabled cp15_barrier support [ 0.059766] Enabled setend support [ 0.059973] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.060017] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.062040] pinctrl core: initialized pinctrl subsystem [ 0.062834] DMI not present or invalid. [ 0.063233] NET: Registered protocol family 16 [ 0.066576] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.066852] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.067777] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.067858] audit: initializing netlink subsys (disabled) [ 0.068253] audit: type=2000 audit(0.068:1): state=initialized audit_enabled=0 res=1 [ 0.068744] thermal_sys: Registered thermal governor 'step_wise' [ 0.069204] cpuidle: using governor menu [ 0.069737] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.069924] ASID allocator initialised with 65536 entries [ 0.070059] Serial: AMBA PL011 UART driver [ 0.097753] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.104337] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:02:15, variant start [ 0.108347] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d [ 0.143042] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.146983] vgaarb: loaded [ 0.147400] SCSI subsystem initialized [ 0.147646] usbcore: registered new interface driver usbfs [ 0.147714] usbcore: registered new interface driver hub [ 0.147799] usbcore: registered new device driver usb [ 0.148117] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.148629] mc: Linux media interface: v0.10 [ 0.150282] clocksource: Switched to clocksource arch_sys_counter [ 1.167791] VFS: Disk quotas dquot_6.6.0 [ 1.167912] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.168082] FS-Cache: Loaded [ 1.168339] CacheFiles: Loaded [ 1.169100] AppArmor: AppArmor Filesystem Enabled [ 1.179584] NET: Registered protocol family 2 [ 1.180498] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.180572] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.180887] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 1.181322] TCP: Hash tables configured (established 32768 bind 32768) [ 1.181566] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.181647] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.181980] NET: Registered protocol family 1 [ 1.182883] RPC: Registered named UNIX socket transport module. [ 1.182911] RPC: Registered udp transport module. [ 1.182932] RPC: Registered tcp transport module. [ 1.182953] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.182985] PCI: CLS 0 bytes, default 64 [ 1.185468] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.185771] kvm [1]: IPA Size Limit: 44 bits [ 1.187029] kvm [1]: vgic interrupt IRQ9 [ 1.187317] kvm [1]: Hyp mode initialized successfully [ 1.189391] Initialise system trusted keyrings [ 1.189744] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.196100] zbud: loaded [ 1.197803] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.198069] FS-Cache: Netfs 'nfs' registered for caching [ 1.198772] NFS: Registering the id_resolver key type [ 1.198827] Key type id_resolver registered [ 1.198850] Key type id_legacy registered [ 1.198979] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.200184] Key type asymmetric registered [ 1.200211] Asymmetric key parser 'x509' registered [ 1.200272] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.200557] io scheduler mq-deadline registered [ 1.200583] io scheduler kyber registered [ 1.204554] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.204602] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.204698] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.204800] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 1.252379] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.252759] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.252791] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.252820] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.252923] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.253174] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.257125] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.257263] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.257695] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.269549] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.269587] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.269638] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.269671] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.270363] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.321947] Console: switching to colour frame buffer device 228x61 [ 1.332984] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984 [ 1.340063] iproc-rng200 fe104000.rng: hwrng registered [ 1.340491] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [ 1.341466] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.341964] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.353211] brd: module loaded [ 1.365791] loop: module loaded [ 1.366528] zram: Added device: zram0 [ 1.367104] zram: Added device: zram1 [ 1.367667] zram: Added device: zram2 [ 1.369307] Loading iSCSI transport class v2.0-870. [ 1.372470] libphy: Fixed MDIO Bus: probed [ 1.373483] tun: Universal TUN/TAP device driver, 1.6 [ 1.374521] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.386344] libphy: bcmgenet MII bus: probed [ 1.438440] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.439624] usbcore: registered new interface driver r8152 [ 1.439758] usbcore: registered new interface driver lan78xx [ 1.441444] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.441544] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002) [ 1.441729] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.441828] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.442703] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [ 1.443735] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.443840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.443929] usb usb1: Product: xHCI Host Controller [ 1.443994] usb usb1: Manufacturer: Linux 5.10.17-v8 xhci-hcd [ 1.444068] usb usb1: SerialNumber: 0000:01:00.0 [ 1.444839] hub 1-0:1.0: USB hub found [ 1.444983] hub 1-0:1.0: 1 port detected [ 1.445655] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.445749] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.445850] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.446430] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.446535] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.446623] usb usb2: Product: xHCI Host Controller [ 1.449348] usb usb2: Manufacturer: Linux 5.10.17-v8 xhci-hcd [ 1.452061] usb usb2: SerialNumber: 0000:01:00.0 [ 1.455338] hub 2-0:1.0: USB hub found [ 1.458054] hub 2-0:1.0: 4 ports detected [ 1.462348] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.465213] dwc_otg: FIQ enabled [ 1.465224] dwc_otg: NAK holdoff enabled [ 1.465235] dwc_otg: FIQ split-transaction FSM enabled [ 1.465249] Module dwc_common_port init [ 1.465826] usbcore: registered new interface driver uas [ 1.468610] usbcore: registered new interface driver usb-storage [ 1.471227] usbcore: registered new interface driver usbserial_generic [ 1.473740] usbserial: USB Serial support registered for generic [ 1.476507] mousedev: PS/2 mouse device common for all mice [ 1.480984] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.487160] sdhci: Secure Digital Host Controller Interface driver [ 1.489657] sdhci: Copyright(c) Pierre Ossman [ 1.493058] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.495751] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.499247] ledtrig-cpu: registered to indicate activity on CPUs [ 1.500633] hid: raw HID events driver (C) Jiri Kosina [ 1.501960] usbcore: registered new interface driver usbhid [ 1.503212] usbhid: USB HID core driver [ 1.508735] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 1.510398] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 1.512189] IPVS: ipvs loaded. [ 1.513634] IPVS: [rr] scheduler registered. [ 1.516111] NET: Registered protocol family 10 [ 1.518555] Segment Routing with IPv6 [ 1.519970] NET: Registered protocol family 17 [ 1.521257] Bridge firewalling registered [ 1.522615] Key type dns_resolver registered [ 1.524317] registered taskstats version 1 [ 1.525596] Loading compiled-in X.509 certificates [ 1.527241] Key type ._fscrypt registered [ 1.528503] Key type .fscrypt registered [ 1.529683] Key type fscrypt-provisioning registered [ 1.530912] AppArmor: AppArmor sha1 policy hashing enabled [ 1.536839] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.538131] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.539384] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2 [ 1.544946] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.546643] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.547839] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.579425] printk: console [netcon0] enabled [ 1.582020] netconsole: network logging started [ 1.584721] of_cfs_init [ 1.588459] of_cfs_init: OK [ 1.607647] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.611550] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.615129] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.615311] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.617991] Waiting for root device PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd... [ 1.624245] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.627115] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.653712] random: fast init done [ 1.693139] mmc1: new high speed SDIO card at address 0001 [ 1.778312] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.928909] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.931551] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.934149] usb 1-1: Product: USB2.0 Hub [ 1.938635] hub 1-1:1.0: USB hub found [ 1.941156] hub 1-1:1.0: 4 ports detected [ 2.054695] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.075923] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 2.04 [ 2.077841] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.079770] usb 2-1: Product: External USB 3.0 [ 2.081681] usb 2-1: Manufacturer: JMicron [ 2.083598] usb 2-1: SerialNumber: 201703310007F [ 2.088188] usb 2-1: UAS is ignored for this device, using usb-storage instead [ 2.089788] usb 2-1: UAS is ignored for this device, using usb-storage instead [ 2.091245] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.093099] usb-storage 2-1:1.0: Quirks match for vid 152d pid 0578: 1800000 [ 2.094670] scsi host0: usb-storage 2-1:1.0 [ 2.242317] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd [ 2.511147] usb 1-1.2: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 1.06 [ 2.513791] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.516439] usb 1-1.2: Product: Back-UPS RS 1000 FW:7.g9 .I USB FW:g9 [ 2.519068] usb 1-1.2: Manufacturer: American Power Conversion [ 2.521559] usb 1-1.2: SerialNumber: NB0651005606 [ 3.084826] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g9 .I USB FW:g9 ] on usb-0000:01:00.0-1.2/input0 [ 3.102898] scsi 0:0:0:0: Direct-Access External USB3.0 0204 PQ: 0 ANSI: 6 [ 3.105508] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.108081] sd 0:0:0:0: [sda] Write Protect is off [ 3.110149] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08 [ 3.110860] sd 0:0:0:0: [sda] Disabling FUA [ 3.112905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.121376] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 3.125338] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.146522] VFS: Mounted root (squashfs filesystem) readonly on device 8:3. [ 3.150473] devtmpfs: mounted [ 3.158231] Freeing unused kernel memory: 3840K [ 3.166280] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd [ 3.166308] Run /sbin/init as init process [ 3.169035] with arguments: [ 3.169040] /sbin/init [ 3.169044] with environment: [ 3.169048] HOME=/ [ 3.169053] TERM=linux [ 3.275202] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 3.276926] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.278570] usb 1-1.3: Product: ConBee II [ 3.280194] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 3.281845] usb 1-1.3: SerialNumber: DE2151750 [ 3.300517] systemd[1]: System time before build time, advancing clock. [ 3.338180] systemd[1]: systemd 247 running in system mode. (+PAM -AUDIT -SELINUX -IMA +APPARMOR -SMACK -SYSVINIT -UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.342205] systemd[1]: Detected architecture arm64. [ 3.384826] systemd[1]: Set hostname toDescription of problem:
This started when updating to 6.2. Because I had heard of people having issues I plugged in a monitor to keep an eye if everything would go OK during update. Everything seems fine. HA has been up for hours not. Reboot also brings it back just fine. I am just seeeing these pop up over the CLI. Not during typing something myself. They just show up bythemselves.
It is a repetion of these messages:
and also they show up like this