Closed pst11790 closed 2 years ago
Host Logs
[ 0.000000] Linux version 5.15.41 (builder@8685331073af) (x86_64-buildroot-linux-gnu-gcc.br_real (Buildroot -g2eebdbad5) 9.4.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Thu May 19 23:55:07 UTC 2022 [ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt4)/bzImage root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=0c25aa43892848858c7ddbccfe25dafa cgroup_enable=memory fsck.repair=yes console=tty1 rauc.slot=B [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 2032
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9356fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9357000-0x00000000b9357fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9358000-0x00000000b9358fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9359000-0x00000000c97c6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c97c7000-0x00000000cadfdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cadfe000-0x00000000cae43fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cae44000-0x00000000cb777fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cb778000-0x00000000cbd17fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbd18000-0x00000000cbdfefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cbdff000-0x00000000cbdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbe00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI=0xcae0c000 ACPI 2.0=0xcae0c000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0xcbb6a698 MEMATTR=0xc72f8018
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 7050/0D24M8, BIOS 1.17.1 08/12/2021
[ 0.000000] tsc: Detected 2700.000 MHz processor
[ 0.000000] tsc: Detected 2699.909 MHz TSC
[ 0.001041] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001045] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001051] last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.001131] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001971] last_pfn = 0xcbe00 max_arch_pfn = 0x400000000
[ 0.009140] esrt: Reserving ESRT space from 0x00000000cbb6a698 to 0x00000000cbb6a6d0.
[ 0.009147] Using GB pages for direct mapping
[ 0.009412] Secure boot could not be determined
[ 0.009414] ACPI: Early table checksum verification disabled
[ 0.009416] ACPI: RSDP 0x00000000CAE0C000 000024 (v02 DELL )
[ 0.009420] ACPI: XSDT 0x00000000CAE0C0B0 0000E4 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.009426] ACPI: FACP 0x00000000CAE371F8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.009431] ACPI: DSDT 0x00000000CAE0C228 02AFCA (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.009434] ACPI: FACS 0x00000000CB772F00 000040
[ 0.009436] ACPI: APIC 0x00000000CAE37308 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.009439] ACPI: FPDT 0x00000000CAE37390 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.009442] ACPI: FIDT 0x00000000CAE373D8 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.009445] ACPI: MCFG 0x00000000CAE37488 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.009448] ACPI: HPET 0x00000000CAE374C8 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.009450] ACPI: SSDT 0x00000000CAE37500 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.009453] ACPI: SSDT 0x00000000CAE3A678 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.009456] ACPI: HPET 0x00000000CAE3CC20 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ 0.009459] ACPI: SSDT 0x00000000CAE3CC58 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.009462] ACPI: SSDT 0x00000000CAE3DA40 000BB4 (v02 INTEL DELL_MFF 00000000 INTL 20160422)
[ 0.009466] ACPI: UEFI 0x00000000CAE3E5F8 000042 (v01 00000000 00000000)
[ 0.009468] ACPI: SSDT 0x00000000CAE3E640 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.009471] ACPI: LPIT 0x00000000CAE3F520 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.009474] ACPI: SSDT 0x00000000CAE3F5B8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.009477] ACPI: SSDT 0x00000000CAE3F700 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.009480] ACPI: SSDT 0x00000000CAE3F9A0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.009483] ACPI: SSDT 0x00000000CAE429A8 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.009486] ACPI: DBGP 0x00000000CAE42EB8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.009489] ACPI: DBG2 0x00000000CAE42EF0 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.009491] ACPI: MSDM 0x00000000CAE42F48 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.009494] ACPI: SLIC 0x00000000CAE42FA0 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.009497] ACPI: ASF! 0x00000000CAE43118 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.009500] ACPI: DMAR 0x00000000CAE431B8 0000CC (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.009503] ACPI: Reserving FACP table memory at [mem 0xcae371f8-0xcae37303]
[ 0.009505] ACPI: Reserving DSDT table memory at [mem 0xcae0c228-0xcae371f1]
[ 0.009506] ACPI: Reserving FACS table memory at [mem 0xcb772f00-0xcb772f3f]
[ 0.009507] ACPI: Reserving APIC table memory at [mem 0xcae37308-0xcae3738b]
[ 0.009508] ACPI: Reserving FPDT table memory at [mem 0xcae37390-0xcae373d3]
[ 0.009509] ACPI: Reserving FIDT table memory at [mem 0xcae373d8-0xcae37483]
[ 0.009510] ACPI: Reserving MCFG table memory at [mem 0xcae37488-0xcae374c3]
[ 0.009511] ACPI: Reserving HPET table memory at [mem 0xcae374c8-0xcae374ff]
[ 0.009512] ACPI: Reserving SSDT table memory at [mem 0xcae37500-0xcae3a675]
[ 0.009513] ACPI: Reserving SSDT table memory at [mem 0xcae3a678-0xcae3cc1c]
[ 0.009515] ACPI: Reserving HPET table memory at [mem 0xcae3cc20-0xcae3cc57]
[ 0.009516] ACPI: Reserving SSDT table memory at [mem 0xcae3cc58-0xcae3da3c]
[ 0.009517] ACPI: Reserving SSDT table memory at [mem 0xcae3da40-0xcae3e5f3]
[ 0.009518] ACPI: Reserving UEFI table memory at [mem 0xcae3e5f8-0xcae3e639]
[ 0.009519] ACPI: Reserving SSDT table memory at [mem 0xcae3e640-0xcae3f51d]
[ 0.009520] ACPI: Reserving LPIT table memory at [mem 0xcae3f520-0xcae3f5b3]
[ 0.009521] ACPI: Reserving SSDT table memory at [mem 0xcae3f5b8-0xcae3f6f8]
[ 0.009522] ACPI: Reserving SSDT table memory at [mem 0xcae3f700-0xcae3f99e]
[ 0.009523] ACPI: Reserving SSDT table memory at [mem 0xcae3f9a0-0xcae429a1]
[ 0.009525] ACPI: Reserving SSDT table memory at [mem 0xcae429a8-0xcae42eb4]
[ 0.009526] ACPI: Reserving DBGP table memory at [mem 0xcae42eb8-0xcae42eeb]
[ 0.009527] ACPI: Reserving DBG2 table memory at [mem 0xcae42ef0-0xcae42f43]
[ 0.009528] ACPI: Reserving MSDM table memory at [mem 0xcae42f48-0xcae42f9c]
[ 0.009529] ACPI: Reserving SLIC table memory at [mem 0xcae42fa0-0xcae43115]
[ 0.009530] ACPI: Reserving ASF! table memory at [mem 0xcae43118-0xcae431b7]
[ 0.009531] ACPI: Reserving DMAR table memory at [mem 0xcae431b8-0xcae43283]
[ 0.009718] No NUMA configuration found
[ 0.009719] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[ 0.009723] NODE_DATA(0) allocated [mem 0x22dffc000-0x22dffffff]
[ 0.009741] Zone ranges:
[ 0.009742] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009744] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009746] Normal [mem 0x0000000100000000-0x000000022dffffff]
[ 0.009747] Movable zone start for each node
[ 0.009748] Early memory node ranges
[ 0.009749] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.009751] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.009752] node 0: [mem 0x0000000000100000-0x00000000b9356fff]
[ 0.009753] node 0: [mem 0x00000000b9359000-0x00000000c97c6fff]
[ 0.009754] node 0: [mem 0x00000000cbdff000-0x00000000cbdfffff]
[ 0.009755] node 0: [mem 0x0000000100000000-0x000000022dffffff]
[ 0.009757] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff]
[ 0.009760] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.009762] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.009782] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.014259] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.014357] On node 0, zone DMA32: 9784 pages in unavailable ranges
[ 0.021015] On node 0, zone Normal: 16896 pages in unavailable ranges
[ 0.021100] On node 0, zone Normal: 8192 pages in unavailable ranges
[ 0.021109] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff]
[ 0.021352] ACPI: PM-Timer IO Port: 0x1808
[ 0.021357] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.021359] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.021360] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.021361] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.021388] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.021391] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.021393] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.021396] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.021397] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.021400] TSC deadline timer available
[ 0.021401] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.021418] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.021420] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.021422] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.021424] PM: hibernation: Registered nosave memory: [mem 0xb9357000-0xb9357fff]
[ 0.021425] PM: hibernation: Registered nosave memory: [mem 0xb9358000-0xb9358fff]
[ 0.021427] PM: hibernation: Registered nosave memory: [mem 0xc97c7000-0xcadfdfff]
[ 0.021428] PM: hibernation: Registered nosave memory: [mem 0xcadfe000-0xcae43fff]
[ 0.021429] PM: hibernation: Registered nosave memory: [mem 0xcae44000-0xcb777fff]
[ 0.021430] PM: hibernation: Registered nosave memory: [mem 0xcb778000-0xcbd17fff]
[ 0.021431] PM: hibernation: Registered nosave memory: [mem 0xcbd18000-0xcbdfefff]
[ 0.021432] PM: hibernation: Registered nosave memory: [mem 0xcbe00000-0xcfffffff]
[ 0.021433] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.021434] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.021435] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.021436] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.021437] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.021438] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.021439] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.021439] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.021440] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.021441] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.021443] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.021445] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.026805] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.026930] percpu: Embedded 53 pages/cpu s178968 r8192 d29928 u524288
[ 0.026936] pcpu-alloc: s178968 r8192 d29928 u524288 alloc=1*2097152
[ 0.026939] pcpu-alloc: [0] 0 1 2 3
[ 0.026956] Built 1 zonelists, mobility grouping on. Total pages: 2029798
[ 0.026958] Policy zone: Normal
[ 0.026959] Kernel command line: BOOT_IMAGE=(hd0,gpt4)/bzImage root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootwait zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=0c25aa43892848858c7ddbccfe25dafa cgroup_enable=memory fsck.repair=yes console=tty1 rauc.slot=B
[ 0.027112] Unknown kernel command line parameters "BOOT_IMAGE=(hd0,gpt4)/bzImage cgroup_enable=memory", will be passed to user space.
[ 0.027484] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.027685] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.027727] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.050741] Memory: 7964608K/8248712K available (14347K kernel code, 2492K rwdata, 4784K rodata, 1348K init, 1696K bss, 283844K reserved, 0K cma-reserved)
[ 0.050781] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.050790] Kernel/User page tables isolation: enabled
[ 0.050856] rcu: Hierarchical RCU implementation.
[ 0.050857] rcu: RCU event tracing is enabled.
[ 0.050857] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.050859] Tracing variant of Tasks RCU enabled.
[ 0.050860] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.050861] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.051666] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ 0.052099] random: get_random_bytes called from start_kernel+0x4ad/0x67b with crng_init=0
[ 0.052138] spurious 8259A interrupt: IRQ7.
[ 0.052163] Console: colour dummy device 80x25
[ 0.052392] printk: console [tty1] enabled
[ 0.052404] ACPI: Core revision 20210730
[ 0.052684] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.052786] APIC: Switch to symmetric I/O mode setup
[ 0.055538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.059758] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26eae8729ef, max_idle_ns: 440795235156 ns
[ 0.059765] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.81 BogoMIPS (lpj=2699909)
[ 0.059770] pid_max: default: 32768 minimum: 301
[ 0.060784] LSM: Security Framework initializing
[ 0.060805] AppArmor: AppArmor initialized
[ 0.060831] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.060846] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.061032] CPU0: Thermal monitoring enabled (TM1)
[ 0.061082] process: using mwait in idle threads
[ 0.061085] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.061087] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.061093] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.061097] Spectre V2 : Mitigation: Retpolines
[ 0.061098] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.061101] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.061103] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.061106] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.061111] TAA: Mitigation: TSX disabled
[ 0.061114] SRBDS: Mitigation: Microcode
[ 0.061116] MDS: Mitigation: Clear CPU buffers
[ 0.063029] Freeing SMP alternatives memory: 44K
[ 0.063501] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1251
[ 0.063516] smpboot: CPU0: Intel(R) Core(TM) i5-6600T CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.063598] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.063610] ... version: 4
[ 0.063612] ... bit width: 48
[ 0.063613] ... generic registers: 8
[ 0.063614] ... value mask: 0000ffffffffffff
[ 0.063616] ... max period: 00007fffffffffff
[ 0.063618] ... fixed-purpose events: 3
[ 0.063619] ... event mask: 00000007000000ff
[ 0.063709] rcu: Hierarchical SRCU implementation.
[ 0.063762] smp: Bringing up secondary CPUs ...
[ 0.063762] x86: Booting SMP configuration:
[ 0.063762] .... node #0, CPUs: #1 #2 #3
[ 0.064880] smp: Brought up 1 node, 4 CPUs
[ 0.064880] smpboot: Max logical packages: 1
[ 0.064880] smpboot: Total of 4 processors activated (21599.27 BogoMIPS)
[ 0.065797] devtmpfs: initialized
[ 0.065911] ACPI: PM: Registering ACPI NVS region [mem 0xb9357000-0xb9357fff] (4096 bytes)
[ 0.065911] ACPI: PM: Registering ACPI NVS region [mem 0xcae44000-0xcb777fff] (9650176 bytes)
[ 0.065960] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.065966] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.066000] pinctrl core: initialized pinctrl subsystem
[ 0.066140] PM: RTC time: 16:33:20, date: 2022-06-02
[ 0.066206] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.066316] audit: initializing netlink subsys (disabled)
[ 0.066323] audit: type=2000 audit(1654187600.012:1): state=initialized audit_enabled=0 res=1
[ 0.066323] thermal_sys: Registered thermal governor 'step_wise'
[ 0.066323] thermal_sys: Registered thermal governor 'user_space'
[ 0.066323] cpuidle: using governor menu
[ 0.066323] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.066323] ACPI: bus type PCI registered
[ 0.066323] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.066323] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.066323] PCI: Using configuration type 1 for base access
[ 0.066764] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.067796] Kprobes globally optimized
[ 0.067800] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.068788] ACPI: Added _OSI(Module Device)
[ 0.068791] ACPI: Added _OSI(Processor Device)
[ 0.068792] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.068794] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.068796] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.068798] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.068800] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
[ 0.100719] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.105983] ACPI: Dynamic OEM Table Load:
[ 0.105992] ACPI: SSDT 0xFFFF9A524030C000 000630 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.106909] ACPI: _PR.CPU0: _OSC native thermal LVT Acked
[ 0.107932] ACPI: Dynamic OEM Table Load:
[ 0.107940] ACPI: SSDT 0xFFFF9A524020EC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.109040] ACPI: Dynamic OEM Table Load:
[ 0.109047] ACPI: SSDT 0xFFFF9A524030D000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.110102] ACPI: Dynamic OEM Table Load:
[ 0.110108] ACPI: SSDT 0xFFFF9A5240145000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.110977] ACPI: Dynamic OEM Table Load:
[ 0.110983] ACPI: SSDT 0xFFFF9A5240145200 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.113600] ACPI: Interpreter enabled
[ 0.113634] ACPI: PM: (supports S0 S4 S5)
[ 0.113636] ACPI: Using IOAPIC for interrupt routing
[ 0.113665] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.114409] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.116208] ACPI: PM: Power Resource [PG00]
[ 0.116467] ACPI: PM: Power Resource [PG01]
[ 0.116714] ACPI: PM: Power Resource [PG02]
[ 0.117122] ACPI: PM: Power Resource [WRST]
[ 0.117314] ACPI: PM: Power Resource [WRST]
[ 0.117507] ACPI: PM: Power Resource [WRST]
[ 0.117698] ACPI: PM: Power Resource [WRST]
[ 0.117890] ACPI: PM: Power Resource [WRST]
[ 0.118083] ACPI: PM: Power Resource [WRST]
[ 0.118272] ACPI: PM: Power Resource [WRST]
[ 0.118462] ACPI: PM: Power Resource [WRST]
[ 0.118652] ACPI: PM: Power Resource [WRST]
[ 0.118844] ACPI: PM: Power Resource [WRST]
[ 0.119035] ACPI: PM: Power Resource [WRST]
[ 0.119225] ACPI: PM: Power Resource [WRST]
[ 0.119420] ACPI: PM: Power Resource [WRST]
[ 0.119611] ACPI: PM: Power Resource [WRST]
[ 0.119804] ACPI: PM: Power Resource [WRST]
[ 0.119998] ACPI: PM: Power Resource [WRST]
[ 0.120188] ACPI: PM: Power Resource [WRST]
[ 0.121057] ACPI: PM: Power Resource [WRST]
[ 0.121249] ACPI: PM: Power Resource [WRST]
[ 0.121441] ACPI: PM: Power Resource [WRST]
[ 0.130826] ACPI: PM: Power Resource [FN00]
[ 0.130883] ACPI: PM: Power Resource [FN01]
[ 0.130935] ACPI: PM: Power Resource [FN02]
[ 0.130985] ACPI: PM: Power Resource [FN03]
[ 0.131036] ACPI: PM: Power Resource [FN04]
[ 0.131785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.131794] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.131938] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.132071] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[ 0.132074] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.132309] PCI host bridge to bus 0000:00
[ 0.132312] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.132316] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.132318] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.132321] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.132324] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.132326] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.132329] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.132332] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.132334] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.132337] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.132339] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.132342] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.132344] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.132347] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.132349] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window]
[ 0.132352] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.132355] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.132460] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.132691] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.132701] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[ 0.132708] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.132713] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.132730] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.132987] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[ 0.133015] pci 0000:00:14.0: reg 0x10: [mem 0xef130000-0xef13ffff 64bit]
[ 0.133115] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.133585] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
[ 0.133614] pci 0000:00:14.2: reg 0x10: [mem 0xef150000-0xef150fff 64bit]
[ 0.134027] pci 0000:00:15.0: [8086:a2e0] type 00 class 0x118000
[ 0.134237] pci 0000:00:15.0: reg 0x10: [mem 0xef14f000-0xef14ffff 64bit]
[ 0.135331] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[ 0.135357] pci 0000:00:16.0: reg 0x10: [mem 0xef14e000-0xef14efff 64bit]
[ 0.135441] pci 0000:00:16.0: PME# supported from D3hot
[ 0.135786] pci 0000:00:16.3: [8086:a2bd] type 00 class 0x070002
[ 0.135806] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
[ 0.135816] pci 0000:00:16.3: reg 0x14: [mem 0xef14d000-0xef14dfff]
[ 0.136081] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[ 0.136103] pci 0000:00:17.0: reg 0x10: [mem 0xef148000-0xef149fff]
[ 0.136116] pci 0000:00:17.0: reg 0x14: [mem 0xef14c000-0xef14c0ff]
[ 0.136129] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.136141] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.136154] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.136166] pci 0000:00:17.0: reg 0x24: [mem 0xef14b000-0xef14b7ff]
[ 0.136229] pci 0000:00:17.0: PME# supported from D3hot
[ 0.136509] pci 0000:00:1c.0: [8086:a297] type 01 class 0x060400
[ 0.136644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.137093] pci 0000:00:1f.0: [8086:a2c6] type 00 class 0x060100
[ 0.137427] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[ 0.137446] pci 0000:00:1f.2: reg 0x10: [mem 0xef144000-0xef147fff]
[ 0.137733] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[ 0.137758] pci 0000:00:1f.3: reg 0x10: [mem 0xef140000-0xef143fff 64bit]
[ 0.137789] pci 0000:00:1f.3: reg 0x20: [mem 0xef120000-0xef12ffff 64bit]
[ 0.137843] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.138450] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[ 0.138510] pci 0000:00:1f.4: reg 0x10: [mem 0xef14a000-0xef14a0ff 64bit]
[ 0.138582] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.138895] pci 0000:00:1f.6: [8086:15e3] type 00 class 0x020000
[ 0.138918] pci 0000:00:1f.6: reg 0x10: [mem 0xef100000-0xef11ffff]
[ 0.139034] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.139293] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
[ 0.139342] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit]
[ 0.139591] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.139890] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.139900] pci 0000:00:1c.0: bridge window [mem 0xef000000-0xef0fffff]
[ 0.141598] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.141642] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.141684] ACPI: PCI: Interrupt link LNKC configured for IRQ 5
[ 0.141724] ACPI: PCI: Interrupt link LNKD configured for IRQ 3
[ 0.141765] ACPI: PCI: Interrupt link LNKE configured for IRQ 6
[ 0.141806] ACPI: PCI: Interrupt link LNKF configured for IRQ 5
[ 0.141847] ACPI: PCI: Interrupt link LNKG configured for IRQ 14
[ 0.141889] ACPI: PCI: Interrupt link LNKH configured for IRQ 10
[ 0.146609] iommu: Default domain type: Translated
[ 0.146612] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.146623] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.146623] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.146623] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.146623] vgaarb: loaded
[ 0.146623] SCSI subsystem initialized
[ 0.146623] libata version 3.00 loaded.
[ 0.146623] ACPI: bus type USB registered
[ 0.146623] usbcore: registered new interface driver usbfs
[ 0.146623] usbcore: registered new interface driver hub
[ 0.146623] usbcore: registered new device driver usb
[ 0.146768] mc: Linux media interface: v0.10
[ 0.146773] videodev: Linux video capture interface: v2.00
[ 0.146779] pps_core: LinuxPPS API ver. 1 registered
[ 0.146781] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.146784] PTP clock support registered
[ 0.146794] Registered efivars operations
[ 0.146827] Advanced Linux Sound Architecture Driver Initialized.
[ 0.146941] Bluetooth: Core ver 2.22
[ 0.146947] NET: Registered PF_BLUETOOTH protocol family
[ 0.146948] Bluetooth: HCI device and connection manager initialized
[ 0.146951] Bluetooth: HCI socket layer initialized
[ 0.146953] Bluetooth: L2CAP socket layer initialized
[ 0.146955] Bluetooth: SCO socket layer initialized
[ 0.146958] NetLabel: Initializing
[ 0.146959] NetLabel: domain hash size = 128
[ 0.146961] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.146975] NetLabel: unlabeled traffic allowed by default
[ 0.146985] PCI: Using ACPI for IRQ routing
[ 0.161108] PCI: pci_cache_line_size set to 64 bytes
[ 0.161187] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.161188] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.161189] e820: reserve RAM buffer [mem 0xb9357000-0xbbffffff]
[ 0.161191] e820: reserve RAM buffer [mem 0xc97c7000-0xcbffffff]
[ 0.161192] e820: reserve RAM buffer [mem 0xcbe00000-0xcbffffff]
[ 0.161193] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[ 0.161267] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.161275] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.162783] clocksource: Switched to clocksource tsc-early
[ 0.166757] VFS: Disk quotas dquot_6.6.0
[ 0.166772] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.166845] AppArmor: AppArmor Filesystem Enabled
[ 0.166854] pnp: PnP ACPI init
[ 0.167066] system 00:00: [io 0x0a00-0x0a3f] has been reserved
[ 0.167071] system 00:00: [io 0x0a40-0x0a7f] has been reserved
[ 0.167592] pnp 00:01: [dma 0 disabled]
[ 0.167757] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.167761] system 00:02: [io 0xffff] has been reserved
[ 0.167767] system 00:02: [io 0xffff] has been reserved
[ 0.167770] system 00:02: [io 0xffff] has been reserved
[ 0.167772] system 00:02: [io 0x1800-0x18fe] has been reserved
[ 0.167774] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.167847] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.167889] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.168017] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.168021] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.168023] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.168026] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.168028] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.168031] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.168033] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.168036] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.168038] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.168041] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.168073] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.168076] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.168079] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.168081] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.168084] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.168086] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.168089] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.168314] system 00:08: [io 0xff00-0xfffe] has been reserved
[ 0.169875] pnp: PnP ACPI: found 10 devices
[ 0.175320] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.175346] NET: Registered PF_INET protocol family
[ 0.175424] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.176357] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.176378] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.176438] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.176530] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.176552] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.176568] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.176605] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.176673] RPC: Registered named UNIX socket transport module.
[ 0.176675] RPC: Registered udp transport module.
[ 0.176676] RPC: Registered tcp transport module.
[ 0.176678] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.176685] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.176693] pci 0000:00:1c.0: bridge window [mem 0xef000000-0xef0fffff]
[ 0.176706] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.176709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.176711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.176714] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.176716] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.176718] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.176721] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.176723] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.176725] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.176728] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.176730] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.176732] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.176735] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.176737] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.176739] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xefffffff window]
[ 0.176742] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.176744] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef0fffff]
[ 0.177055] PCI: CLS 0 bytes, default 64
[ 0.177065] DMAR: Host address width 39
[ 0.177067] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.177075] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.177079] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.177085] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.177088] DMAR: RMRR base: 0x000000cac51000 end: 0x000000cac70fff
[ 0.177091] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[ 0.177093] DMAR: ANDD device: 1 name: _SB.PCI0.I2C0
[ 0.177097] DMAR: ACPI device "device:77" under DMAR at fed91000 as 00:15.0
[ 0.177108] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.177109] software IO TLB: mapped [mem 0x00000000c32f8000-0x00000000c72f8000] (64MB)
[ 0.274965] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.274970] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.274972] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.274974] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.274975] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.275575] Initialise system trusted keyrings
[ 0.275599] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.276701] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.276807] NFS: Registering the id_resolver key type
[ 0.276818] Key type id_resolver registered
[ 0.276819] Key type idlegacy registered
[ 0.285708] Key type asymmetric registered
[ 0.285711] Asymmetric key parser 'x509' registered
[ 0.285722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.285740] io scheduler mq-deadline registered
[ 0.285742] io scheduler kyber registered
[ 0.286090] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.286110] ACPI: button: Sleep Button [SLPB]
[ 0.286133] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.286147] ACPI: button: Power Button [PWRB]
[ 0.286170] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.286194] ACPI: button: Power Button [PWRF]
[ 0.286433] Monitor-Mwait will be used to enter C-1 state
[ 0.286436] Monitor-Mwait will be used to enter C-2 state
[ 0.286438] Monitor-Mwait will be used to enter C-3 state
[ 0.286439] ACPI: _PR.CPU0: Found 3 idle states
[ 0.286501] ACPI BIOS Error (bug): Could not resolve symbol [_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.286509] ACPI Error: Aborting method _PR.CPU1._CPC due to previous error (AE_NOTFOUND) (20210730/psparse-529)
[ 0.286583] ACPI: _PR.CPU1: Found 3 idle states
[ 0.286639] ACPI BIOS Error (bug): Could not resolve symbol [_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.286644] ACPI Error: Aborting method _PR.CPU2._CPC due to previous error (AE_NOTFOUND) (20210730/psparse-529)
[ 0.286715] ACPI: _PR.CPU2: Found 3 idle states
[ 0.286773] ACPI BIOS Error (bug): Could not resolve symbol [_PR.CPU0._CPC], AE_NOT_FOUND (20210730/psargs-330)
[ 0.286778] ACPI Error: Aborting method _PR.CPU3._CPC due to previous error (AE_NOTFOUND) (20210730/psparse-529)
[ 0.286849] ACPI: _PR.CPU3: Found 3 idle states
[ 0.287156] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.287160] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.287257] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.287260] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.287336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.287414] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.287744] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 0.287941] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 20, base_baud = 115200) is a 16550A
[ 0.288131] Non-volatile memory driver v1.3
[ 0.288149] Linux agpgart interface v0.103
[ 0.289199] loop: module loaded
[ 0.289259] zram: Added device: zram0
[ 0.289316] zram: Added device: zram1
[ 0.289371] zram: Added device: zram2
[ 0.289623] ahci 0000:00:17.0: version 3.0
[ 0.299971] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.299980] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 0.300640] scsi host0: ahci
[ 0.301072] scsi host1: ahci
[ 0.301480] scsi host2: ahci
[ 0.301696] scsi host3: ahci
[ 0.301724] ata1: SATA max UDMA/133 abar m2048@0xef14b000 port 0xef14b100 irq 121
[ 0.301727] ata2: DUMMY
[ 0.301729] ata3: DUMMY
[ 0.301730] ata4: DUMMY
[ 0.301997] tun: Universal TUN/TAP device driver, 1.6
[ 0.302026] e100: Intel(R) PRO/100 Network Driver
[ 0.302028] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.302037] e1000: Intel(R) PRO/1000 Network Driver
[ 0.302039] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.302048] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.302049] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.302195] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.405504] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 0.468240] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d8:9e:f3:9f:7f:72
[ 0.468249] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 0.468313] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 0.468334] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.468336] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.468347] sky2: driver version 1.30
[ 0.468521] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.468526] ehci-pci: EHCI PCI platform driver
[ 0.468549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.468553] ohci-pci: OHCI PCI platform driver
[ 0.468559] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.468700] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.468837] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.469974] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.470187] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.470191] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.470194] usb usb1: Product: xHCI Host Controller
[ 0.470196] usb usb1: Manufacturer: Linux 5.15.41 xhci-hcd
[ 0.470199] usb usb1: SerialNumber: 0000:00:14.0
[ 0.470402] hub 1-0:1.0: USB hub found
[ 0.470439] hub 1-0:1.0: 16 ports detected
[ 0.471190] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.471314] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.471335] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.471366] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[ 0.471370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.471373] usb usb2: Product: xHCI Host Controller
[ 0.471375] usb usb2: Manufacturer: Linux 5.15.41 xhci-hcd
[ 0.471377] usb usb2: SerialNumber: 0000:00:14.0
[ 0.471548] hub 2-0:1.0: USB hub found
[ 0.471574] hub 2-0:1.0: 10 ports detected
[ 0.471780] usb: port power management may be unreliable
[ 0.472015] usbcore: registered new interface driver usblp
[ 0.472028] usbcore: registered new interface driver usb-storage
[ 0.472042] usbcore: registered new interface driver usbserial_generic
[ 0.472046] usbserial: USB Serial support registered for generic
[ 0.472062] i8042: PNP: No PS/2 controller found.
[ 0.472296] rtc_cmos 00:04: RTC can wake from S4
[ 0.472905] rtc_cmos 00:04: registered as rtc0
[ 0.472917] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.473025] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.473069] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.477299] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 0.477685] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 0.477973] Driver for 1-wire Dallas network protocol.
[ 0.478443] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.478452] intel_pstate: Intel P-state driver initializing
[ 0.478612] intel_pstate: HWP enabled
[ 0.478620] sdhci: Secure Digital Host Controller Interface driver
[ 0.478621] sdhci: Copyright(c) Pierre Ossman
[ 0.478651] EFI Variables Facility v0.08 2004-May-17
[ 0.486325] hid: raw HID events driver (C) Jiri Kosina
[ 0.486407] usbcore: registered new interface driver usbhid
[ 0.486409] usbhid: USB HID core driver
[ 0.486976] IPVS: Registered protocols ()
[ 0.486986] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 0.487014] IPVS: ipvs loaded.
[ 0.487016] IPVS: [rr] scheduler registered.
[ 0.487115] NET: Registered PF_INET6 protocol family
[ 0.487372] Segment Routing with IPv6
[ 0.487378] In-situ OAM (IOAM) with IPv6
[ 0.487401] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.487479] NET: Registered PF_PACKET protocol family
[ 0.487489] Bridge firewalling registered
[ 0.487500] Key type dns_resolver registered
[ 0.487787] microcode: sig=0x506e3, pf=0x2, revision=0xea
[ 0.487859] microcode: Microcode Update Driver: v2.2.
[ 0.487862] IPI shorthand broadcast: enabled
[ 0.487873] sched_clock: Marking stable (485959049, 1805701)->(489657067, -1892317)
[ 0.487965] registered taskstats version 1
[ 0.487968] Loading compiled-in X.509 certificates
[ 0.488076] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.488265] PM: Magic number: 10:874:589
[ 0.488328] printk: console [netcon0] enabled
[ 0.488330] netconsole: network logging started
[ 0.488369] ALSA device list:
[ 0.488371] No soundcards found.
[ 0.614464] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.614902] ata1.00: ATA-10: Micron 1100 SATA 256GB, M0DL022, max UDMA/133
[ 0.618206] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.620226] ata1.00: Features: Dev-Sleep NCQ-sndrcv NCQ-prio
[ 0.626089] ata1.00: configured for UDMA/133
[ 0.626478] scsi 0:0:0:0: Direct-Access ATA Micron 1100 SATA L022 PQ: 0 ANSI: 5
[ 0.627330] ata1.00: Enabling discard_zeroes_data
[ 0.627367] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.627401] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.627414] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.627430] sd 0:0:0:0: [sda] Write Protect is off
[ 0.627437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.627456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.627828] ata1.00: Enabling discard_zeroes_data
[ 0.629641] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 0.630492] ata1.00: Enabling discard_zeroes_data
[ 0.630604] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.630678] md: Waiting for all devices to be available before autodetect
[ 0.630691] md: If you don't use raid, use raid=noautodetect
[ 0.630696] md: Autodetecting RAID arrays.
[ 0.630701] md: autorun ...
[ 0.630704] md: ... autorun DONE.
[ 0.632476] VFS: Mounted root (squashfs filesystem) readonly on device 8:5.
[ 0.632901] devtmpfs: mounted
[ 0.633488] Freeing unused kernel image (initmem) memory: 1348K
[ 0.636911] Write protecting the kernel read-only data: 22528k
[ 0.637934] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.638532] Freeing unused kernel image (rodata/data gap) memory: 1360K
[ 0.638634] Run /sbin/init as init process
[ 0.638639] with arguments:
[ 0.638641] /sbin/init
[ 0.638643] with environment:
[ 0.638644] HOME=/
[ 0.638645] TERM=linux
[ 0.638647] BOOT_IMAGE=(hd0,gpt4)/bzImage
[ 0.638649] cgroup_enable=memory
[ 0.710821] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 0.737046] systemd[1]: systemd 250 running in system mode (+PAM -AUDIT -SELINUX +APPARMOR -IMA -SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL -ACL +BLKID +CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ +ZLIB -ZSTD -BPF_FRAMEWORK -XKBCOMMON -UTMP -SYSVINIT default-hierarchy=hybrid)
[ 0.737322] systemd[1]: Detected architecture x86-64.
[ 0.748764] random: fast init done
[ 0.750380] systemd[1]: Hostname set to
Coore Logs:
2022-06-02 12:57:45 WARNING (SyncWorker_0) [homeassistant.loader] We found a custom integration noonlight which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2022-06-02 12:57:45 WARNING (SyncWorker_1) [homeassistant.loader] We found a custom integration nodered which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2022-06-02 12:57:45 WARNING (SyncWorker_3) [homeassistant.loader] We found a custom integration hacs which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2022-06-02 12:57:45 WARNING (SyncWorker_1) [homeassistant.loader] We found a custom integration winix which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2022-06-02 12:57:45 WARNING (SyncWorker_2) [homeassistant.loader] We found a custom integration alarmo which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant
2022-06-02 12:57:50 WARNING (MainThread) [homeassistant.components.mqtt.mixins] Manually configured MQTT binary_sensor(s) found under platform key 'binary_sensor', please move to the mqtt integration key, see https://www.home-assistant.io/integrations/binary_sensor.mqtt/#new_format
2022-06-02 12:57:50 WARNING (MainThread) [homeassistant.components.mqtt.mixins] Manually configured MQTT sensor(s) found under platform key 'sensor', please move to the mqtt integration key, see https://www.home-assistant.io/integrations/sensor.mqtt/#new_format
2022-06-02 12:57:50 WARNING (MainThread) [homeassistant.components.mqtt] The 'broker' option near /config/configuration.yaml:20 is deprecated, please remove it from your configuration
2022-06-02 12:57:50 WARNING (MainThread) [homeassistant.components.mqtt] The 'password' option near /config/configuration.yaml:20 is deprecated, please remove it from your configuration
2022-06-02 12:57:50 WARNING (MainThread) [homeassistant.components.mqtt] The 'port' option near /config/configuration.yaml:20 is deprecated, please remove it from your configuration
2022-06-02 12:57:50 WARNING (MainThread) [homeassistant.components.mqtt] The 'username' option near /config/configuration.yaml:20 is deprecated, please remove it from your configuration
2022-06-02 12:57:51 WARNING (MainThread) [homeassistant.components.mqtt] Deprecated configuration settings found in configuration.yaml. These settings from your configuration entry will override: {'username': 'mosquitto', 'password': '****'}
2022-06-02 12:57:51 WARNING (MainThread) [homeassistant.helpers.frame] Detected integration that uses deprecated async_get_registry
to access device registry, use async_get instead. Please report issue to the custom component author for alarmo using this method at custom_components/alarmo/init.py, line 58: device_registry = await dr.async_get_registry(hass)
2022-06-02 12:57:54 WARNING (MainThread) [homeassistant.config_entries] Config entry 'HP LaserJet 200 color M251nw (F50229)' for ipp integration not ready yet: Invalid response from API: Error occurred while communicating with IPP server.; Retrying in background
2022-06-02 12:58:02 WARNING (MainThread) [homeassistant.components.google] The 'google' option near /config/configuration.yaml:1 is deprecated, please remove it from your configuration
2022-06-02 12:58:02 WARNING (MainThread) [homeassistant.components.google] Configuration of Google Calendar in YAML in configuration.yaml is is deprecated and will be removed in a future release; Your existing OAuth Application Credentials and access settings have been imported into the UI automatically and can be safely removed from your configuration.yaml file
2022-06-02 12:58:02 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry Home Assistant Cloud for xbox
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/config_entries.py", line 339, in async_setup
result = await component.async_setup_entry(hass, self)
File "/usr/src/homeassistant/homeassistant/components/xbox/init.py", line 101, in async_setup_entry
consoles: SmartglassConsoleList = await client.smartglass.get_console_list()
File "/usr/local/lib/python3.9/site-packages/xbox/webapi/api/provider/smartglass/init.py", line 54, in get_console_list
resp = await self._fetch_list("devices", params, kwargs)
File "/usr/local/lib/python3.9/site-packages/xbox/webapi/api/provider/smartglass/init.py", line 359, in _fetch_list
resp = await self.client.session.get(
File "/usr/local/lib/python3.9/site-packages/xbox/webapi/api/client.py", line 86, in get
return await self.request(hdrs.METH_GET, url, kwargs)
File "/usr/local/lib/python3.9/site-packages/xbox/webapi/api/client.py", line 60, in request
await self._auth_mgr.refresh_tokens()
File "/usr/src/homeassistant/homeassistant/components/xbox/api.py", line 27, in refresh_tokens
await self._oauth_session.async_ensure_token_valid()
File "/usr/src/homeassistant/homeassistant/helpers/config_entry_oauth2_flow.py", line 472, in async_ensure_token_valid
new_token = await self.implementation.async_refresh_token(self.token)
File "/usr/src/homeassistant/homeassistant/helpers/config_entry_oauth2_flow.py", line 89, in async_refresh_token
new_token = await self._async_refresh_token(token)
File "/usr/src/homeassistant/homeassistant/components/cloud/account_link.py", line 116, in _async_refresh_token
new_token = await account_link.async_fetch_access_token(
File "/usr/local/lib/python3.9/site-packages/hass_nabucasa/account_link.py", line 112, in async_fetch_access_token
resp.raise_for_status()
File "/usr/local/lib/python3.9/site-packages/aiohttp/client_reqrep.py", line 1004, in raise_for_status
raise ClientResponseError(
aiohttp.client_exceptions.ClientResponseError: 500, message='Internal Server Error', url=URL('https://account-link.nabucasa.com/refresh_token/xbox')
2022-06-02 12:58:02 ERROR (MainThread) [homeassistant.helpers.integration_platform] Error processing platform xbox.media_source
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/integration_platform.py", line 51, in _async_process_single_integration_platform_component
await integration_platform.process_platform(hass, component_name, platform)
File "/usr/src/homeassistant/homeassistant/components/media_source/init.py", line 79, in _process_media_source_platform
hass.data[DOMAIN][domain] = await platform.async_get_media_source(hass)
File "/usr/src/homeassistant/homeassistant/components/xbox/media_source.py", line 46, in async_get_media_source
client = hass.data[DOMAIN][entry.entry_id]["client"]
KeyError: 'aa5b0f7cf27e272eaf0cbc3e19d94e23'
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Database is about to upgrade. Schema version: 26
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Adding columns data_id to table events. Note: this can take several minutes on large databases and slow computers. Please be patient!
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Adding index ix_events_data_id
to database. Note: this can take several minutes on large databases and slow computers. Please be patient!
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Adding columns origin_idx to table events. Note: this can take several minutes on large databases and slow computers. Please be patient!
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Adding columns origin_idx, context_id, context_user_id, context_parent_id to table states. Note: this can take several minutes on large databases and slow computers. Please be patient!
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Adding index ix_states_context_id
to database. Note: this can take several minutes on large databases and slow computers. Please be patient!
2022-06-02 12:58:04 WARNING (Recorder) [homeassistant.components.recorder.migration] Adding index ix_statistics_meta_statistic_id
to database. Note: this can take several minutes on large databases and slow computers. Please be patient!
2022-06-02 12:58:05 ERROR (MainThread) [homeassistant] Error doing job: Task exception was never retrieved
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/discovery_flow.py", line 74, in _async_process_pending_flows
await gather_withconcurrency(
File "/usr/src/homeassistant/homeassistant/util/async.py", line 199, in gather_withconcurrency
return await gather(
File "/usr/src/homeassistant/homeassistant/util/async.py", line 197, in sem_task
return await task
File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 205, in async_init
flow, result = await task
File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 232, in _async_init
result = await self._async_handle_step(flow, flow.init_step, data, init_done)
File "/usr/src/homeassistant/homeassistant/data_entry_flow.py", line 335, in _async_handle_step
result: FlowResult = await getattr(flow, method)(user_input)
File "/usr/src/homeassistant/homeassistant/components/netgear/config_flow.py", line 138, in async_step_ssdp
await self.async_set_unique_id(discovery_info.upnp[ssdp.ATTR_UPNP_SERIAL])
KeyError: 'serialNumber'
2022-06-02 13:07:42 WARNING (MainThread) [homeassistant.helpers.service] Unable to find referenced entities switch.piezo_buzzer or it is/they are currently not available
2022-06-02 13:07:47 WARNING (MainThread) [homeassistant.helpers.service] Unable to find referenced entities switch.piezo_buzzer or it is/they are currently not available
2022-06-02 13:28:33 ERROR (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Error reading from socket.
2022-06-02 13:28:33 WARNING (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Error communicating with socket, resetting connection
2022-06-02 13:28:45 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Heartbeat timeout, resetting connection
2022-06-02 13:28:47 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:28:48 WARNING (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Heartbeat timeout, resetting connection
2022-06-02 13:28:53 WARNING (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Heartbeat timeout, resetting connection
2022-06-02 13:29:13 ERROR (MainThread) [homeassistant.components.upnp] Error fetching RAX43 (Gateway) data: Unable to communicate with IGD at: http://192.168.1.1:56688/Public_UPNP_gatedesc.xml
2022-06-02 13:29:15 ERROR (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.2', 8009)), retrying in 5.0s
2022-06-02 13:29:17 ERROR (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Failed to connect to service ServiceInfo(type='mdns', data='Google-Home-Mini-5b27a8d197058dabb5d69ee5fd13bdae._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:29:18 ERROR (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.9', 8009)), retrying in 5.0s
2022-06-02 13:29:23 ERROR (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Failed to connect to service ServiceInfo(type='mdns', data='Chromecast-8259bed852e930de3eb9e38edc5dedfc._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:29:28 ERROR (SyncWorker_1) [pynetgear.router] Error talking to API
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/urllib3/connection.py", line 174, in _new_conn
conn = connection.create_connection(
File "/usr/local/lib/python3.9/site-packages/urllib3/util/connection.py", line 95, in create_connection
raise err
File "/usr/local/lib/python3.9/site-packages/urllib3/util/connection.py", line 85, in create_connection
sock.connect(sa)
socket.timeout: timed out
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 703, in urlopen
httplib_response = self._make_request(
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 386, in _make_request
self._validate_conn(conn)
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 1040, in _validate_conn
conn.connect()
File "/usr/local/lib/python3.9/site-packages/urllib3/connection.py", line 358, in connect
self.sock = conn = self._new_conn()
File "/usr/local/lib/python3.9/site-packages/urllib3/connection.py", line 179, in _new_conn
raise ConnectTimeoutError(
urllib3.exceptions.ConnectTimeoutError: (<urllib3.connection.HTTPSConnection object at 0x7fdd820e7bb0>, 'Connection to 192.168.1.1 timed out. (connect timeout=30)')
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/requests/adapters.py", line 440, in send
resp = conn.urlopen(
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 785, in urlopen
retries = retries.increment(
File "/usr/local/lib/python3.9/site-packages/urllib3/util/retry.py", line 592, in increment
raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='192.168.1.1', port=443): Max retries exceeded with url: /soap/server_sa/ (Caused by ConnectTimeoutError(<urllib3.connection.HTTPSConnection object at 0x7fdd820e7bb0>, 'Connection to 192.168.1.1 timed out. (connect timeout=30)'))
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/pynetgear/router.py", line 163, in _make_request
response = self._post_request(headers, message)
File "/usr/local/lib/python3.9/site-packages/pynetgear/router.py", line 118, in _post_request
return requests.post(
File "/usr/local/lib/python3.9/site-packages/requests/api.py", line 117, in post
return request('post', url, data=data, json=json, kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/api.py", line 61, in request
return session.request(method=method, url=url, kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/sessions.py", line 529, in request
resp = self.send(prep, send_kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/sessions.py", line 645, in send
r = adapter.send(request, kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/adapters.py", line 507, in send
raise ConnectTimeout(e, request=request)
requests.exceptions.ConnectTimeout: HTTPSConnectionPool(host='192.168.1.1', port=443): Max retries exceeded with url: /soap/server_sa/ (Caused by ConnectTimeoutError(<urllib3.connection.HTTPSConnection object at 0x7fdd820e7bb0>, 'Connection to 192.168.1.1 timed out. (connect timeout=30)'))
2022-06-02 13:29:28 ERROR (SyncWorker_1) [pynetgear.router] Get attached devices failed
2022-06-02 13:29:40 ERROR (MainThread) [homeassistant.components.plex.server] Could not connect to Plex server: PMS-DT3610 (HTTPSConnectionPool(host='192-168-1-21.0a0c753dd9254fdaaac88c1973f410c2.plex.direct', port=32400): Max retries exceeded with url: /clients (Caused by ConnectTimeoutError(<urllib3.connection.HTTPSConnection object at 0x7fdd905f6f40>, 'Connection to 192-168-1-21.0a0c753dd9254fdaaac88c1973f410c2.plex.direct timed out. (connect timeout=30)')))
2022-06-02 13:30:08 WARNING (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Heartbeat timeout, resetting connection
2022-06-02 13:30:11 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Heartbeat timeout, resetting connection
2022-06-02 13:30:12 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:30:21 WARNING (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Heartbeat timeout, resetting connection
2022-06-02 13:30:38 ERROR (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.9', 8009)), retrying in 5.0s
2022-06-02 13:30:41 ERROR (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.2', 8009)), retrying in 5.0s
2022-06-02 13:30:42 ERROR (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Failed to connect to service ServiceInfo(type='mdns', data='Google-Home-Mini-5b27a8d197058dabb5d69ee5fd13bdae._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:30:51 ERROR (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Failed to connect to service ServiceInfo(type='mdns', data='Chromecast-8259bed852e930de3eb9e38edc5dedfc._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:30:58 ERROR (SyncWorker_6) [pynetgear.router] Get attached devices failed
2022-06-02 13:31:31 WARNING (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Heartbeat timeout, resetting connection
2022-06-02 13:31:36 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Heartbeat timeout, resetting connection
2022-06-02 13:31:37 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:31:47 ERROR (MainThread) [plexwebsocket] Websocket connection failed, retrying in 15s: Cannot connect to host 192-168-1-21.0a0c753dd9254fdaaac88c1973f410c2.plex.direct:32400 ssl:default [Connect call failed ('192.168.1.21', 32400)]
2022-06-02 13:32:01 ERROR (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.9', 8009)), retrying in 5.0s
2022-06-02 13:32:06 ERROR (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.2', 8009)), retrying in 5.0s
2022-06-02 13:32:13 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:32:15 ERROR (MainThread) [homeassistant.components.plex.server] Could not connect to Plex server: PMS-DT3610 (HTTPSConnectionPool(host='plex.tv', port=443): Max retries exceeded with url: /api/resources?includeHttps=1&includeRelay=1 (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fdd9037f130>: Failed to establish a new connection: [Errno -3] Try again')))
2022-06-02 13:32:24 WARNING (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Heartbeat timeout, resetting connection
2022-06-02 13:32:28 ERROR (SyncWorker_5) [pynetgear.router] Get attached devices failed
2022-06-02 13:32:43 ERROR (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Failed to connect to service ServiceInfo(type='mdns', data='Google-Home-Mini-5b27a8d197058dabb5d69ee5fd13bdae._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:32:54 ERROR (Thread-9) [pychromecast.socket_client] [Living Room TV(192.168.1.6):8009] Failed to connect to service ServiceInfo(type='mdns', data='Chromecast-8259bed852e930de3eb9e38edc5dedfc._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:32:54 ERROR (MainThread) [homeassistant.components.plex.server] Could not connect to Plex server: PMS-DT3610 (('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')))
2022-06-02 13:32:56 ERROR (MainThread) [homeassistant.helpers.entity] Update for sensor.waze_travel_time fails
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/urllib3/connection.py", line 174, in _new_conn
conn = connection.create_connection(
File "/usr/local/lib/python3.9/site-packages/urllib3/util/connection.py", line 72, in create_connection
for res in socket.getaddrinfo(host, port, family, socket.SOCK_STREAM):
File "/usr/local/lib/python3.9/socket.py", line 954, in getaddrinfo
for res in _socket.getaddrinfo(host, port, family, type, proto, flags):
socket.gaierror: [Errno -3] Try again
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 703, in urlopen
httplib_response = self._make_request(
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 386, in _make_request
self._validate_conn(conn)
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 1040, in _validate_conn
conn.connect()
File "/usr/local/lib/python3.9/site-packages/urllib3/connection.py", line 358, in connect
self.sock = conn = self._new_conn()
File "/usr/local/lib/python3.9/site-packages/urllib3/connection.py", line 186, in _new_conn
raise NewConnectionError(
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fdd8114afa0>: Failed to establish a new connection: [Errno -3] Try again
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/requests/adapters.py", line 440, in send
resp = conn.urlopen(
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 785, in urlopen
retries = retries.increment(
File "/usr/local/lib/python3.9/site-packages/urllib3/util/retry.py", line 592, in increment
raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.waze.com', port=443): Max retries exceeded with url: /RoutingManager/routingRequest?from=x%3A-85.75942427315198+y%3A39.752921648208364&to=x%3A-86.03027031058836+y%3A39.92341924139534&at=0&returnJSON=true&returnGeometries=true&returnInstructions=true&timeout=60000&nPaths=3&options=AVOID_TRAILS%3At&subscription=%2A (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fdd8114afa0>: Failed to establish a new connection: [Errno -3] Try again'))
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 515, in async_update_ha_state
await self.async_device_update()
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 743, in async_device_update
raise exc
File "/usr/local/lib/python3.9/concurrent/futures/thread.py", line 58, in run
result = self.fn(*self.args, self.kwargs)
File "/usr/src/homeassistant/homeassistant/components/waze_travel_time/sensor.py", line 169, in update
self._waze_data.update()
File "/usr/src/homeassistant/homeassistant/components/waze_travel_time/sensor.py", line 216, in update
routes = params.calc_all_routes_info(real_time=realtime)
File "/usr/local/lib/python3.9/site-packages/WazeRouteCalculator/WazeRouteCalculator.py", line 208, in calc_all_routes_info
routes = self.get_route(npaths, time_delta)
File "/usr/local/lib/python3.9/site-packages/WazeRouteCalculator/WazeRouteCalculator.py", line 137, in get_route
response = requests.get(self.WAZE_URL + routing_server, params=url_options, headers=self.HEADERS)
File "/usr/local/lib/python3.9/site-packages/requests/api.py", line 75, in get
return request('get', url, params=params, kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/api.py", line 61, in request
return session.request(method=method, url=url, kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/sessions.py", line 529, in request
resp = self.send(prep, send_kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/sessions.py", line 645, in send
r = adapter.send(request, kwargs)
File "/usr/local/lib/python3.9/site-packages/requests/adapters.py", line 519, in send
raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.waze.com', port=443): Max retries exceeded with url: /RoutingManager/routingRequest?from=x%3A-85.75942427315198+y%3A39.752921648208364&to=x%3A-86.03027031058836+y%3A39.92341924139534&at=0&returnJSON=true&returnGeometries=true&returnInstructions=true&timeout=60000&nPaths=3&options=AVOID_TRAILS%3At&subscription=%2A (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fdd8114afa0>: Failed to establish a new connection: [Errno -3] Try again'))
2022-06-02 13:33:01 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Heartbeat timeout, resetting connection
2022-06-02 13:33:03 WARNING (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Heartbeat timeout, resetting connection
2022-06-02 13:33:03 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:33:31 ERROR (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.2', 8009)), retrying in 5.0s
2022-06-02 13:33:33 ERROR (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Failed to connect to service ServiceInfo(type='mdns', data='Google-Home-Mini-5b27a8d197058dabb5d69ee5fd13bdae._googlecast._tcp.local.'), retrying in 5.0s
2022-06-02 13:33:35 ERROR (MainThread) [plexwebsocket] Websocket connection failed, retrying in 15s: Cannot connect to host 192-168-1-21.0a0c753dd9254fdaaac88c1973f410c2.plex.direct:32400 ssl:default [Try again]
2022-06-02 13:33:58 ERROR (SyncWorker_0) [pynetgear.router] Get attached devices failed
2022-06-02 13:34:01 ERROR (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Error reading from socket.
2022-06-02 13:34:01 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Error communicating with socket, resetting connection
2022-06-02 13:34:05 ERROR (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Error reading from socket.
2022-06-02 13:34:05 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Error communicating with socket, resetting connection
2022-06-02 13:34:21 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Heartbeat timeout, resetting connection
2022-06-02 13:34:22 WARNING (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Heartbeat timeout, resetting connection
2022-06-02 13:34:26 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:34:35 ERROR (SyncWorker_5) [pynetgear.router] Unauthorized response, re-login failed
2022-06-02 13:34:52 ERROR (Thread-8) [pychromecast.socket_client] [Office TV(192.168.1.9):8009] Failed to connect to service ServiceInfo(type='host', data=('192.168.1.9', 8009)), retrying in 5.0s
2022-06-02 13:34:58 WARNING (Thread-6) [pychromecast.socket_client] [Garage speaker(192.168.1.2):8009] Heartbeat timeout, resetting connection
2022-06-02 13:35:01 WARNING (Thread-7) [pychromecast.socket_client] [Bedroom speaker(192.168.1.10):8009] Heartbeat timeout, resetting connection
2022-06-02 13:35:05 ERROR (SyncWorker_5) [pynetgear.router] Error talking to API
Traceback (most recent call last):
File "/usr/local/lib/python3.9/site-packages/urllib3/connectionpool.py", line 449, in _make_request
six.raise_from(e, None)
File "
Will reopen in the future if necessary
I've got this exact same issue, @pst11790
Version | core-2021.12.8 -- | -- Installation Type | Home Assistant OS Development | false Supervisor | true Docker | true User | root Virtual Environment | false Python Version | 3.9.7 Operating System Family | Linux Operating System Version | 5.10.92-v8 CPU Architecture | aarch64
Describe the issue you are experiencing
Home Assistant randomly connection refused. From what I can tell, I'm not having any internet connectivity issues Issue started yesterday after a failed update to 2022.6.0 I was able to restore from backup but I have been having issues since. I since was able to get the update to install but issue is still happening
Home Assistant Core 2022.6.0 Home Assistant Supervisor 2022.05.3 Home Assistant OS 8.1
What is the used version of the Supervisor?
2022.05.3
What type of installation are you running?
Home Assistant OS
Which operating system are you running on?
Home Assistant Operating System
What is the version of your installed operating system?
8.1
What version of Home Assistant Core is installed?
2022.6.0
Steps to reproduce the issue
1. 2. 3. ..
Anything in the Supervisor logs that might be useful for us?