选的program_2 安装和配置都成功也重启了路由器 但是路由器下的设备并不能翻墙

[flzyup]

RT，选的：ss-redir+chnroutes+chinadns+pdnsd 端口列表： Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:9091 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5353 0.0.0.0:* LISTEN tcp 0 0 192.168.100.1:139 0.0.0.0:* LISTEN tcp 0 0 192.168.1.3:8080 0.0.0.0:* LISTEN tcp 0 0 192.168.100.1:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:1080 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:51515 0.0.0.0:* LISTEN tcp 0 0 192.168.100.1:445 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:1054 0.0.0.0:* LISTEN tcp 0 0 :::5353 :::* LISTEN tcp 0 0 :::53 :::* LISTEN tcp 0 0 :::22 :::* LISTEN tcp 0 0 :::23 :::* LISTEN tcp 0 0 :::51515 :::* LISTEN 进程列表： 949 root 1032 S eapd 951 root 1508 S nas 1014 root 1516 S telnetd -p 23 1032 root 1056 S dropbear -p 22 -a 1035 root 1032 S eapd 1041 root 1508 S nas 1078 nobody 1600 S dnsmasq -c 1500 --log-async 1081 root 0 SW [kjournald] 1088 root 1540 S crond -l 9 1092 root 1056 S rstats 1095 root 1064 S cstats 1100 root 0 SW [flush-8:0] 1129 root 3504 S cron 1133 root 1948 S ss-redir -c /opt/etc/shadowsocks.json 1146 root 352 S chinadns -p 5353 -c /opt/etc/chnroute.txt -s 180.168.255.118,116.228.111.18,127.0.0.1:1054 1164 nobody 30320 S pdnsd -c /opt/etc/pdnsd.conf -p /opt/var/run/pdnsd.pid 1184 root 186m S Pcap_DNSProxy --config-file /opt/etc/pcap-dnsproxy 1315 root 1528 S udhcpc -i vlan2 -b -s dhcpc-event -H unknown -O 33 -O 121 -O 249 -m -p /var/run/udhcpc-wan.pid 2244 root 1120 S dropbear -p 22 -a 2245 root 1540 S -sh 2854 root 2352 S nmbd -D 2855 root 2304 S nmbd -D 2961 root 2812 S httpd 2964 root 3064 S N smbd -D 3005 root 16996 S /usr/bin/transmission-daemon -g /opt/btconfig/.settings 3006 root 16996 S /usr/bin/transmission-daemon -g /opt/btconfig/.settings 3007 root 16996 S /usr/bin/transmission-daemon -g /opt/btconfig/.settings 3008 root 16996 S /usr/bin/transmission-daemon -g /opt/btconfig/.settings 3046 root 16996 S /usr/bin/transmission-daemon -g /opt/btconfig/.settings 3857 root 1520 S /bin/sh -c /usr/sbin/watchdog 3858 root 1520 S /bin/sh -c /usr/sbin/watchdog alive 3859 root 1520 S {watchdog} /bin/sh /usr/sbin/watchdog 3860 root 1516 S {watchdog} /bin/sh /usr/sbin/watchdog alive 3871 root 1520 R ps 3872 root 1516 S {watchdog} /bin/sh /usr/sbin/watchdog alive 3874 root 1512 R echo google.com,microsoft.com 3875 root 1516 S sed s/,/ / 3876 root 1520 R {watchdog} /bin/sh /usr/sbin/watchdog

似乎都起来了，有什么需要修改的吗？要用-g使用global 路由器下的设备才能被正确路由？

[houzi-]

麻烦报一下路由器的型号和架构！ -g是全局模式(⊙o⊙)哦！ 由于开发DD-WRT的shadowsocks所以精力有限，这个6.0版本测试不充分就推送上去了！如果需要远程协助的请联系我的邮箱，这样解决问题总比说来的更直接高效！

[flzyup]

Name TomatoUSB Model Asus RT-N18U Chipset ARMv7 Processor rev 0 (v7l) CPU Freq 800 MHz (single-core) Flash Size 128MB

Processor : ARMv7 Processor rev 0 (v7l) processor : 0 BogoMIPS : 1599.07

Features : swp half thumb fastmult edsp CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0

Hardware : Northstar Prototype Revision : 0000 Serial : 0000000000000000 路由器信息如上

[guixiaomin]

@houzi- ,因为已经有一台爱快了。不想 花费多余的钱去折腾梅林，请问烽火hg320 这种mips,16M闪存的机器。jffs勉强能安装进去吗？

[guixiaomin]

@houzi- 版本还是暂时用5?