search

hut2012 / imsdroid

Automatically exported from code.google.com/p/imsdroid
0 stars 0 forks source link

Video Issues receiving and transmitting H263-1998 #69

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.register the device
2.make a video call
3.enable video
4. capture DDMS output and wireshart

What is the expected output? What do you see instead?

wireshark shows that video is negotiated with the remote. H263-1998  is 
selected on 200 response to the invite. enable video from the menu after the 
call is established. no video packets are sent to the remote. 

What version of the product are you using? On what operating system?
Android 2.1 update1, trunk of imsdroid

Please provide any additional information below.

trace3 - device is in landscape mode. trace4 device is in portrait mode. 
Preview is not visible in landscape mode. Preview is visible in portrait mode, 
but video orientation is not correct. I believe it is counter clock-wise 
rotated by 90degrees. videoout is a logcat trace from ddms.

Original issue reported on code.google.com by alex9...@gmail.com on 30 Sep 2010 at 11:52

Attachments:

GoogleCodeExporter commented 9 years ago 
Which device do you have? Are you using front camera?
Do you have the same pb with the official version?

Original comment by boss...@yahoo.fr on 30 Sep 2010 at 1:53

GoogleCodeExporter commented 9 years ago 
i have a Chineese Manufactured MID tablet device with front facing camera using 
Android2.1-update1. as I had the other issue with registration i dont know if 
the original version would have the same issue. let me know how you would like 
to continue  or what debug info you will need

Original comment by alex9...@gmail.com on 30 Sep 2010 at 3:27

GoogleCodeExporter commented 9 years ago 
i still have not figured out why i don't see H263-1998 stream when the video is 
negotiated as such.when I enable video i would expect H263-1998 packets to 
appear in the trace. however, I don't see it. i enable video as soon as the 
call is answered. please let me know if you see anything wrong

Original comment by alex9...@gmail.com on 30 Sep 2010 at 11:54

Attachments:

GoogleCodeExporter commented 9 years ago 
attached is a new trace file where i used the latest apk from accounts from 
iptel.org. I also used X-lite 4.0 as all of them were tested network and 
software. still i did not see h263 packets even though the conversation was 
negotiated as such. what am i missing?

Original comment by alex9...@gmail.com on 1 Oct 2010 at 12:51

Attachments:

GoogleCodeExporter commented 9 years ago 
AFAIK "iptel.org" do not support two RTP channels at same time. You should use 
"sip2sip.info" to test video. Off course the problem is not about the network 
but caused by your camera. Your device uses Qualcomm drivers but there are many 
errors in the log files.
Try to downgrade the video quality from "Medium/High" to "low", try again at 
send me the log file using "Log collector" from the market.
My email address is diopmamadou(at)doubango(dot)com

Original comment by boss...@yahoo.fr on 1 Oct 2010 at 1:06

GoogleCodeExporter commented 9 years ago 
Correction: "not using Qualcomm" instead of "uses Qualcomm".

Original comment by boss...@yahoo.fr on 1 Oct 2010 at 1:18

GoogleCodeExporter commented 9 years ago 
i can understand there could be camera issues as this is a no-brand device. Can 
you point out where do you believe are critical errors and how to debug. I have 
seen error setting camera parameter in the internal log, but did not think it 
was critical. What bothers me is that I see the preview fine, but i don't see 
packets going out with video. I already tried your suggestion and it dd not 
make a difference. I will do it one more time to collect the logs. I will also 
try sip2sip to test the video as well.

Original comment by alex9...@gmail.com on 1 Oct 2010 at 1:26

GoogleCodeExporter commented 9 years ago 
Any news?

Original comment by boss...@yahoo.fr on 20 Oct 2010 at 6:44

GoogleCodeExporter commented 9 years ago 
Sorry for the delay. I was traveling and just came back. I wanted to try the 
application on EVO and video is working. but i have noticed a couple of things. 
first, when you hold evo vertically, the remote shows video at 90degree turn. 
Also, scaling of the displayed image is not correct when in full screen mode in 
the application. Please provide a few tips and I will try to fix it

Original comment by alex9...@gmail.com on 25 Oct 2010 at 10:05

GoogleCodeExporter commented 9 years ago 
Could you please send a screenshot about the full screen?

Original comment by boss...@yahoo.fr on 26 Oct 2010 at 9:32

GoogleCodeExporter commented 9 years ago

Original comment by boss...@yahoo.fr on 20 Nov 2010 at 3:35