ECAD - PICOBLADE-6X1-MALESTR-P125 - 1388 - PCB connector, Picoblade, 6 contacts, Straight

[Lawproto]

Description	Field	Notes
Datasheet	[link or attachment ] *
Manufacturer info	[Manufacturer name + serial number] *
Alias Creo	[Alias or filename MCAD] **
MCAD Contact	Lorenzo Protopapa, @Lawproto
ECAD Contact	Francesco Garini, @fgarini
Maintainer	Marcello Savoldi, @marcellosavoldi

Legend:

• "*" = To compile only if this information are missing in the database (Wingst)
• "**" = To compile only if it is a preliminary name

Image with origin e PIN 1 position by PADS (mandatory)

Attachments (optional)

Plug connector information (mandatory for connectors "board to wire")

Notes (optional)

Checklist:

• [x] Added IIT-CODE from WINGST.
• [x] Added assignees (min. 1 mechanical + 1 electrical contact).
• [x] Added Link/datasheet/drawing or others information (or information into Wingst database compiled).
• [x] Added details about the PIN 1 and the orientation of the origin of the component (img/sketch/print-screen).
• [x] Added details about the PLUG connector (added datasheet, or Wingst code).
• [x] Converted the files with the EDU-COM license.

[Lawproto]

@fgarini can you please provide me with a screenshot for the pin 1 position? You can find the alias of the component in title.

[marcellosavoldi]

cc @maurizbo

[fgarini]

[fgarini]

qui si vede l'origine, tra le pad 7 e 8

[Lawproto]

@fgarini I am understanding the origin is on the vertical axis of symmetry of the whole component and on the horizontal axis of symmetry of pads 7 and 8. Correct?

[marcellosavoldi]

all Picoblades made so far have the origin in the centre of the PAD of PIN 1.... are you sure you want to make it different?

then of course for convenience you always put a plane in the centreline to facilitate mechanical assembly...

[maurizbo]

I agree with @marcellosavoldi, unfortunately this code has already been used in lots of previous cards (like 2FOC, AMO1 .., lastly in amcx-jig) with the old way to choice the origin, in the center of the component. In this case the center has been individuated in the middle between the two "retention" pins. That's all folks 😒

[Lawproto]

@maurizbo so be it. Thank you all.

[Lawproto]

• Added details about the PIN 1 and the orientation of the origin of the component (img/sketch/print-screen).

[Lawproto]

• Added details about the PLUG connector (added datasheet, or Wingst code).