Engine bleeds show pressure and high temperatures when engines are turned off. PAX selector has amber dashes instead of white. EAD showing AIR ISOL ON but the respective button has no ON light when in AIR SYS AUTO mode. Pack and cabin temperatures start at 0c when loading the plane and start slowly increasing to ambient temperature
Steps to reproduce
Power up the plane by turning on the battery, external power and set emergency power to ARM. Switch to AIR SD and observe readouts. If you do this fast enough, you can see the pressures increasing. Bleed temperatures show 80C despite it being 26C outside.Have only some engines running and notice how ISOL EAD messages dont match with the respective overhead button lights
Observe ISOL lights, pressures, temperatures with engines off and running.
Expected behaviour
1) Bleed pressures rise only with engines running
2) Bleed temperatures match the ambient temperature
3) PAX loadout shows white dashes when selected 000
4) ISOL valve button lights reflect the valve status in AUTO mode. In MANUAL mode they work correctly.
5) Pack and cabin temperatures to match the ambient temperature at loading the plane,
Evidence
All engines off, bleed pressures 33-35 PSI, bleed air temperatures 80-85C
All engines running and bleeds turned off --> Pressures correctly drop to zero.
Describe the bug
Engine bleeds show pressure and high temperatures when engines are turned off. PAX selector has amber dashes instead of white. EAD showing AIR ISOL ON but the respective button has no ON light when in AIR SYS AUTO mode. Pack and cabin temperatures start at 0c when loading the plane and start slowly increasing to ambient temperature
Steps to reproduce
Power up the plane by turning on the battery, external power and set emergency power to ARM. Switch to AIR SD and observe readouts. If you do this fast enough, you can see the pressures increasing. Bleed temperatures show 80C despite it being 26C outside.Have only some engines running and notice how ISOL EAD messages dont match with the respective overhead button lights
Observe ISOL lights, pressures, temperatures with engines off and running.
Expected behaviour
1) Bleed pressures rise only with engines running 2) Bleed temperatures match the ambient temperature 3) PAX loadout shows white dashes when selected 000 4) ISOL valve button lights reflect the valve status in AUTO mode. In MANUAL mode they work correctly. 5) Pack and cabin temperatures to match the ambient temperature at loading the plane,
Evidence
All engines off, bleed pressures 33-35 PSI, bleed air temperatures 80-85C
All engines running and bleeds turned off --> Pressures correctly drop to zero.
Simulator
Microsoft Flight Simulator 2020 (MSFS)
Crash
No
Phase of flight
Pre-flight
Altitude
200
Agreement