Dashboard is Causing GCode Scripts for Start/Stop Not to Run

[condraka]

Running Current Versions

Octoprint 1.7.2 Dashboard 1.19.5 OctoPi 0.18.0 Python 3.7.3 on a Rasp Pi 3B+ Rev 1.3

GCode Scripts are partially working with Dashboard Plugin Active. Just updated this weekend to 1.19.5 Dashboard and it stopped working. Program Related Scripts are not being run. Non-Program Related Scripts are working.

WORKING:
Serial Connection Established Serial Connection Closed After Print Job Canceled

NOT WORKING:
Before Print Job Starts After Print Job Completes (Have Not Confirmed This fails since I cancel print after it starts wrong). octoprint-systeminfo-20211115132259.zip

See Errors: 2021-11-15 17:59:44,280 in above octoprint.log

GCODE Script trying to run: Fail's after G90 Absolute Positioning with G1 X-4 Y-4 ; Move Off Table Don't know if the minus axis moves for X/Y is causing a division by zero error.

M109 ;Wait For Hot End Temperature M190 ;Wait for Bed Temperature G28 ;Home Position G90 ;Absolute Positioning G1 X-4 Y-4 ;Move off Table G1 Z0 F3000 ;Move Z to 0 G92 E0 ;Set Extruder Position to 0 G1 F200 E20 ;Prime Extruder G92 E0 ;Set Extruder Position to 0 G1 Z0.60 F1000 ;Move Head Above Table G1 X5.0 Y0.0 F1000 ;Move Head to edge of print area G1 X120.0 E9.0 F1000.0 ;Intro Line G1 Y0.40 E9.0 F1000.0 ;Turn Around G1 X5.0 E20.0 F1000.0 ; End Line

Thanks.

Carl Ondraka

[j7126]

Hi, believe I have created a fix, please install the development branch by installing the plugin with the below url and let me know if the issue is fixed.

https://github.com/j7126/OctoPrint-Dashboard/archive/development.zip

[condraka]

I’ll give it a whirl this weekend. I love dashboard and it has sucked turning it off to run…. Thanks for the update.

Carl E. Ondraka Sent from my iPhone

On Feb 2, 2022, at 3:16 AM, Jefferey Neuffer @.***> wrote:

 Hi, believe I have created a fix, please install the development branch by installing the plugin with the below url and let me know if the issue is fixed.

https://github.com/j7126/OctoPrint-Dashboard/archive/development.zip

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[condraka]

Scripts are running as expected. Fix has corrected script issues. Thanks

Carl E. Ondraka Sent from my iPhone

On Feb 4, 2022, at 10:57 AM, Carl Ondraka @.***> wrote:

I’ll give it a whirl this weekend. I love dashboard and it has sucked turning it off to run…. Thanks for the update.

Carl E. Ondraka Sent from my iPhone

On Feb 2, 2022, at 3:16 AM, Jefferey Neuffer @.***> wrote:

 Hi, believe I have created a fix, please install the development branch by installing the plugin with the below url and let me know if the issue is fixed.

https://github.com/j7126/OctoPrint-Dashboard/archive/development.zip

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[alaorath]

Has this change been merged to master? I ran into the same issue. octoprint.log filled with exceptions ("Error while processing hook dashboard for phase sending and command ") and no completed movement.

Even the default octoprint movement buttons did nothing but generate log errors:

2022-03-05 17:10:00,385 - octoprint.util.comm - ERROR - Error while processing hook dashboard for phase sending and command G0 Z1 F200: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 4611, in _process_command_phase tags=tags, File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/init.py", line 1737, in wrapper return f(*args, *kwargs) File "/home/pi/oprint/lib/python3.7/site-packages/octoprint_dashboard/init.py", line 797, in process_gcode current_layer_progress = int((self.layer_moves / self.layer_move_array[self.current_layer]) 100) IndexError: list index out of range

Solution was to reboot the PI, after reboot everything seemed normal again.

Octoprint: 1.7.3 Python: 3.7.3 OctoPi: 0.17.0 Dashboard: 1.19.8

[j7126]

Has this change been merged to master?

@alaorath It has not yet, but will be included with the next release, coming soon.