[Bug]: Filamant used displaying incorrect value.

colindawson commented 2 years ago

The problem

I'm currently printing out part of a Hero Me Gen 6. The print is supposed to use about 8.34 Meters of filament according to Octoprint. However, having printed 76% of the print, the dash board is saying that I've used about 0.274m.

Version of OctoPrint

1.7.3

Platform

Raspberry PI 4 (2GB)

Operating system running OctoPrint

OctoPi

Dashboard version

1.19.8

Python version

3

Printer model & used firmware incl. version

Ender 3 Pro Dual extruder mutating Marlin 2.0.9.3

Browser and version of browser, operating system running browser

No response

Logs and other files needed for analysis

[X] Systeminfo Bundle (always include!) See here if you don't know where to find that.
[X] Screenshots and/or videos showing the problem (always include in case of issues with the user interface)
[X] GCODE file with which to reproduce (always include in case of issues with GCODE analysis or printing behaviour)

File uploads & additional information

Here's the g-code that I'm running. It was created with Simplify3D 4.1.2 HMG6 Base CR10S-Pro.gcode.txt octoprint-systeminfo-20220214161856.zip

colindawson commented 2 years ago

I can confirm that the amount of filament used never changed. This is something that I have noticed with other prints as well.

j7126 commented 2 years ago

I have made a fix.

This change will be included in the next release, you can try it out by installing the version from development branch using this url https://github.com/j7126/OctoPrint-Dashboard/archive/development.zip

j7126 / OctoPrint-Dashboard