USB Cul Stick wird nicht erkannt (Raspberrymatic Home Assistant Add-On)

[slupus]

Describe the issue you are experiencing

Der USB Cul Stick wird von Home Assistant erkannt und als ttyACM1 angezeigt. Das Raspberrymatic Addon erkennt leider keinen Stick (Identifying Homematic RF-Hardware: HmRF: n/a, HmIP: n/a, OK). Aufgrund von #1745 bin ich davon ausgegangen, dass die Kombination funktioniert.

Describe the behavior you expected

Raspberrymatic erkennt den Stick, sodass er als Zentrale angelernt werden kann.

Steps to reproduce the issue

1. Raspberrymatic Addon im Homeassistant starten
2. Protokoll des Addons auslesen

What is the version this bug report is based on?

3.73.9.20240130

Which base platform are you running?

ha-addon (HomeAssistant Add-on)

Which HomeMatic/homematicIP radio module are you using?

n/a

Anything in the logs that might be useful for us?

Subsystem: tty
Gerätepfad:/dev/ttyACM1
ID: /dev/serial/by-id/usb-busware.de_CUL868-if00

##########

Mounting /data as /usr/local (Home Assistant Add-On): OK
Starting watchdog...
Identifying host system: Raspberry Pi 4 Model B Rev 1.4 (oci), OK
Initializing RTC Clock: no hardware found
Running sysctl: OK
Checking for Factory Reset: not required
Checking for Backup Restore: not required
Running seedrng: OK
Initializing System: OK
Setup ca-certificates: OK
Starting logging: OK
Init onboard LEDs: init, OK
Starting irqbalance: OK
Starting iptables: OK
Starting network: eth0: link up, fixed, firewall, inet up, 172.30.33.2, OK
Identifying Homematic RF-Hardware: HmRF: n/a, HmIP: n/a, OK
Updating Homematic RF-Hardware: no GPIO/USB connected RF-hardware found
Starting hs485dLoader: disabled
Starting xinetd: OK
Starting eq3configd: OK
Starting lighttpd: OK
Starting ser2net: disabled
Starting ssdpd: OK
Starting ha-proxy: OK
Starting NUT services: disabled
Initializing Third-Party Addons: OK
Starting LGWFirmwareUpdate: ...OK
Setting LAN Gateway keys: OK
Starting hs485d: disabled
Starting multimacd: not required
Starting rfd: no BidCos-RF hardware found
Starting HMIPServer: .......OK
Starting ReGaHss: .OK
Starting CloudMatic: OK
Starting NeoServer: disabled
Starting Third-Party Addons: OK
Starting crond: OK
Setup onboard LEDs: booted, OK
Finished Boot: 3.73.9.20240130 (raspmatic_oci_arm64)

Additional information

No response

[github-actions[bot]]

@slupus, the issue ticket you created does not seem to report a general issue/problem/bug in RaspberryMatic itself, but rather seems to point at a local usage issue that rather requires some support using a discussion or support fora. It will therefore be moved to the discussion area where you can continue for identifying solutions to your issue.