search

jiangcuo / Proxmox-Port

Proxmox VE arm64 riscv64 loongarch64
GNU Affero General Public License v3.0
727 stars 37 forks source link

UEFI boot on Orange Pi 5 #83

Closed lonacluka closed 4 weeks ago

lonacluka commented 5 months ago

Hi! I'm trying to boot pve-installer in UEFI mode using the instructions here:

https://github.com/jiangcuo/Proxmox-Port/wiki/Rockchip-RK3588-UEFI-Setup

And everytime the installer (Rockchip Install boot option) boots to busybox with no particular errors visible in the output.

I'm using UEFI firmware for Orange Pi 5 burned to SPI. All UEFI settings applied as instructed on Wiki, and checked that they saved/applied after reboot.

https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.9.1/orangepi-5_UEFI_Release_v0.9.1.img

Using the latest UEFI fw for Opi 5. I successfully booted this Armbian UEFI live iso https://github.com/amazingfate/rk3588-live-iso/releases with no issues

arunas-smala commented 5 months ago

https://github.com/jiangcuo/Proxmox-Port/issues/74

I'm not sure if it was the same case, but I always ended up in the command prompt, no install GUI or something.

First I reinstalled NVMe and suddenly it worked out! Later I got the same while trying to reinstall, so I switched USB stick with proxmox iso to other USB port and it worked!

Would suggest to try flashing ISO to other media, try other USB port also. Good luck, after install it works perfectly fine! (didn't try USB ports tho)

Pix13 commented 4 months ago

I have the same issue, tried the usb2 ports without success ( no disk detected), and the usb-c one did not detect the usb key too, and on the two usb3-A ports it boots too directly to busuybox. I'm trying first to see which device is not detected in case it could help later

Pix13 commented 4 months ago

Ok, looks like a timing issue, i swapped the usb key with a faster one, same USB port, and it booted OK to the installer :) If it happens to you random reader coming here: change the device!