johnfanv2
commented
1 year ago @brett-owen Sorry, for the late response. Currently, there are lots of issues and a also work on lots of other stuff.
Is this a 2023 model?
I added your model/BIOS to the kernel module. Please get the new version, recompile, and reload the kernel module (no need to force anymore).
Then, please test the following features. We have to try a bit to find the correct configuration.
Temperatures and Fan Speeds
Please read the fan speeds and temperatures (see README) and confirm that they are sensible and change accordingly, e.g. when you put load onto the CPU the CPU temp and the fan speeds should increase, but GPU temp should stay roughly the same.
Powermode
We will start by confirming that power mode change work and to get me more debug info. Please change the power mode with Fn+Q and provide the output of the following commands in each mode.
sudo cat /sys/kernel/debug/legion/ecmemoryram | hexdump -C
sudo cat /sys/kernel/debug/legion/ecmemory | hexdump -C
sudo cat /sys/kernel/debug/legion/fancurveThen please also check if the power mode is read correctly in the OS (see README). Then please check if you can set the power mode with the GUI (see README) and the LED changes accordingly.
Tests the following features with the GUI. Please check that if works or otherwise give precise information about what does not work. Please try to check that reading and writing works with the software.
Please provide the log output from the GUI from the log tab for all the tests.
Fn Lock
- Enable fn-lock: A LED might turn on. fn functions now work without pressing Fn
- Disable fn-lock: A LED might turn on. fn functions now work only when pressing Fn
Win Key
- Enable Win Key: Win Key should work, e.g. open start menu or trigger some other action
- Disable Win Key: Win Key has no function anymore
Touchpad
- Enable Touchpad: Touchpad works
- Disable Touchpad: Touchpad does not work
Battery Conservation
- Enabled: charging stops if above 60 % (or 80% depending on model)
- Disabled: charging works up to 100% Note: Sometimes it takes a 10-20 seconds before it takes effect
Rapid Charging
- Enabled: Charging is faster; Check this by comparing the time until fully charged displayed in system information or by comparing charging current.
- Disabled: Charging is slower Note: Sometimes it takes a 10-20 seconds before it takes effect .
Charge Output Always On
- Enabled: Some USB output is always powered even when laptop is off or sleeping; Test e.g. by trying to charge your phone.
- Disabled: USB outputs are off when laptop is off
Display Overdrive
- Enabled: display somehow faster
- Disabled: display not faster Just check if checkbox can be checked or not if you cannot verify that it has an effect.
Keyboard Backlight
In order to fix/configure the keyboard backlight and begin with setting fan curves, please put your keyboard backlight to off, medium, or bright. Provide the output of the following commands (in that order) in each backlight state:
sudo cat /sys/kernel/debug/legion/fancurve
sudo dmesg | tail -n 30Fan curve
First, please give again the output of
sudo cat /sys/kernel/debug/legion/fancurve
sudo dmesg | tail -n 30Second, please use the GUI and enter custom mode. Then change the fan curve (currently only the first row for fan 1), write it to hardware, and read it back. Please report back if it works and provide the log output from the GUI and sudo dmesg | tail -n 70.
MrDuartePT
Farcasut
arashsm79
mcarans
jul1u5
ryanabx
eXWoLL
Model name: Lenovo Legion Slim 5 16APH8 CPU model: AMD Ryzen 7 7840HS GPU model: NVIDIA RTX 4060 Mobile Keyboard backlight: RGB OS: Archlinux
Output of
sudo dmidecode -t system. Please remove Serial Number and UUID for privacy:Output of
sudo dmidecode -t bios:Output of
sudo cat /sys/kernel/debug/legion/fancurve:fwts_wmi.log acpi_re.tar.gz wmi_windows.txt
Output of
sudo make forcereloadmodule:Thanks, let me know if you need any more information to get this model working.