search

kae58 / netbook-installer

Automatically exported from code.google.com/p/netbook-installer
0 stars 0 forks source link

ASUS EeePC1002HA - Install Hang - /Volumes/ramdisk/dsdt/latest_dsdl.dsl: No such file or dir #249

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. Follow this guide http://osx.mechdrew.com/guides/nbi1.shtml
2. Proceed with Install
3. Wait for install to hang with "About 11 Min Remaining."

What netbook are you using this on?
ASUS EeePC 1002HA

What is the expected output? What do you see instead?
Expected: None
Seen: OSInstaller[241]: ./postinstall: cp:
/Volumes/ramdisk/dsdt/latest_dsdl.dsl: No such file or directory

What version of the product are you using? On what operating system?
NetbookBootmaker 8.4RC1

Please provide any additional information below.
Here is a logsave of the installation disk:
http://bcas.tv/paste/results/xzuCdk87.html

Original issue reported on code.google.com by mjeva...@gmail.com on 12 Apr 2010 at 5:59

GoogleCodeExporter commented 8 years ago 
Im having the same problem on a 1005HA trying to install 10.6.3 using NBI 
0.8.5RC1

Original comment by dwilso...@gmail.com on 30 May 2010 at 3:10

GoogleCodeExporter commented 8 years ago 
Same for me as well:

localhost OSInstaller[244]: ./postinstall: cp: 
/Volumes/ramdisk/dsdt/latest_dsdt.dsl:
No such file or directory

FYI installing on a Acer AspireRevo 1600-U910H USFF Atom 230
1.6GHz/512KBL2/2GB/160GB/GigNIC/XPH

Original comment by phillpaf...@gmail.com on 3 Jun 2010 at 8:24

GoogleCodeExporter commented 8 years ago 
As an extra note as per my initial entry:
Notice the incorrect spelling in output:
'OSInstaller[241]: ./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdl.dsl: No 
such file or directory'

Maybe has something to do with "latest_dsdL.dsl" might need to output 
"latest_dsdT.dsl" instead?

Original comment by mjeva...@gmail.com on 4 Jun 2010 at 6:41

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Ditto with the Asus 1000HE.  I've tried 0.8.3 with SL 10.6.0, as well as 0.8.4 
RC1 with 10.6.3.  Error message:
'OSInstaller[241]: ./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdl.dsl: No 
such file or directory'

I finally figured out that I could quite the installer once this line appears 
in the log, reboot, and select the newly 
installed OSX drive from Chameleon.  OSX boots up from the HDD.  I ran NBI, but 
it hung on 'generating system 
specific dsdt.aml'.  Force Quit and reopening worked to install chameleon and 
generic extensions.  I can now 
boot straight to OSX without USB.

Original comment by ete...@gmail.com on 6 Jun 2010 at 3:01

GoogleCodeExporter commented 8 years ago 
Exactly the same problem here on my Eee PC 1008HA.  Using NetbookBootMaker 
0.8.4 RC1
with Snow Leopard 10.6 retail install DVD I am seeing the same "./postinstall: 
cp:
/Volumes/ramdisk/dsdt/latest_dsdt.dsl: No such file or directory" error.

What happens is the install progress bar gets to around 98% and states around 
10 mins
to go and progresses no further.  Looking at the Installer log file shows this 
error
repeated in an infinite loop.

As mjevange mentions, is this just a typo in "latest_dsd*l*.dsl"?

Original comment by steveb...@gmail.com on 6 Jun 2010 at 9:16

GoogleCodeExporter commented 8 years ago 
This Issue appears to be a duplicate of #178 and #231.

Original comment by steveb...@gmail.com on 7 Jun 2010 at 2:09

GoogleCodeExporter commented 8 years ago 
When I try to run NBI I get this error in the console:

6/17/10 11:42:09 
AM  [0x0-0x16016].com.meklort.NetbookInstaller[177] /Volumes/ramdisk/dsdt/latest_
dsdl.dsl: No such file or directory

Notice it's dsdL and not dsdT

I did a quick sudo cp latest_dsdt.dsl latest_dsdl.dsl and the error in the 
console stopped but NBI just hangs now. 

I think there is a Typo for Unsupported Systems, can anyone else confirm?

Original comment by phillpaf...@gmail.com on 17 Jun 2010 at 4:09

GoogleCodeExporter commented 8 years ago 
1000HE having same problems for me as well.  It does appear ok if I restart, 
boot with USB, select my harddrive, then run NBI.  Can't do the generate dsdt 
either from netbook installer.

Original comment by du...@doris.name on 20 Jun 2010 at 9:14

GoogleCodeExporter commented 8 years ago 
Same problem in Mini 110-1025DX

Original comment by ppaul...@gmail.com on 21 Jun 2010 at 6:40

GoogleCodeExporter commented 8 years ago 
This is a really simple issue. There's a typo in line 741 of 
DSDT_Patcher/main.c (and the same typo in line 602 of 
NetbookInstaller/DSDTPatcher.m). The cp command on both should be copying 
latest_dsd*t*.dsl, but it's currently trying to copy the (nonexistent) file 
latest_dsd*l*.dsl.

This is breaking DSDT patching on unsupported systems (most popular one being 
the 1005HA).

Can we get a quick fix on this, please?

Original comment by eksopl on 15 Jul 2010 at 4:23

GoogleCodeExporter commented 8 years ago 
You can download the NBI084RC1 image from the dropbox link on this web site: 
http://www.mydellmini.com/forum/dell-mini-10v-mac-os-x-discussion/20529-hackinto
sh-problems-10-6-3-a-2.html  and use hexedit.exe to fix the three typos.  If 
you boot off of a flash drive with this hex edited image, you get further, but 
you still get some error messages and the ultimately a hang.

If you reboot with the edited image and select the local drive to boot from, 
you "complete" the installation, but I'm not sure what NBI might have wanted to 
do if it completed normally.

Once the install is complete, you can use the standard netbookinstaller to put 
chameleon on your local drive to make it bootable.

Original comment by reesp...@consultant.com on 30 Jul 2010 at 1:20

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Ok I did find the OSX version for HexEdit Here: 
http://sourceforge.net/projects/hexedit/files/HexEdit/HexEdit%20v2.20/HexEdit_22
0.dmg/download

Edited this files: (replaced dsdl w/ dsdt)
NetbookInstaller 0.8.4 
RC1/Contents/Resources/SupportFiles/DSDTPatcher/DSDTPatcher

Next I ran the patched NetbookInstaller (NBI084RC1 image from the dropbox link 
on this web site: 
http://www.mydellmini.com/forum/dell-mini-10v-mac-os-x-discussion/20529-hackinto
sh-problems-10-6-3-a-2.html).

Opened the Console and could see the same error, file not found due to the dsdl 
instead of dsdt. So I opened up the terminal to see if I could just change the 
name of the file that was misspelled. 

1- Open Terminal
2- sudo su
3- enter password
4- cd /Volumes/ramdisk/dsdt/
5- mv latest_dsdt.dsl latest_dsdl.dsl

NBI finished installing, rebooted and now able to boot from the hard drive

Original comment by phillpaf...@gmail.com on 30 Jul 2010 at 2:47

GoogleCodeExporter commented 8 years ago 
You can fix the ".dsdl" bugs in "NetbookBootMaker 0.8.4 RC1.app.zip" or 
"NetbookInstaller 0.8.4 RC1.app.zip" by doing the following:

1. Unzip "NetbookBootMaker 0.8.4 RC1.app.zip" or "NetbookInstaller 0.8.4 
RC1.app.zip" to an OSX desktop
2. tar up the "NetbookBootMaker 0.8.4 RC1.app" or "NetbookInstaller 0.8.4 
RC1.app" directory to "NetbookBootMaker 0.8.4 RC1.app.tar" or "NetbookInstaller 
0.8.4 RC1.app.tar"
3. Delete "NetbookBootMaker 0.8.4 RC1.app.zip" or "NetbookInstaller 0.8.4 
RC1.app.zip" from desktop
4. Hex Edit the resulting tar file for instances of ".dsdl"
5. Untar the "NetbookBootMaker 0.8.4 RC1.app.tar" or "NetbookInstaller 0.8.4 
RC1.app.tar" tar file
6. rezip the resulting app directory [NOTE: you might want to rename to 0.8.4 
RC1a

This works because tar files are not compressed like zip files.

Original comment by reesp...@consultant.com on 30 Jul 2010 at 10:20

GoogleCodeExporter commented 8 years ago 
can someone please provide a file that already has this change? I'm trying to 
follow the steps above and this just isn't working.

I don't know why this syntax error is considered a "medium" priority and hasn't 
gotten more attention.

Original comment by ralph.c...@gmail.com on 30 Aug 2010 at 2:48

GoogleCodeExporter commented 8 years ago 
I followed methods described in comment 17+16  and installation on asus 1001HA 
was completed till 100%. I also removed the package OSInstall.pkg to let only 
OSInstall.mpkg. 
@ralphacare: can you please tell how you proceed to replace dsdl by dsdt and 
where you are sticked ? Idea is to have .tar files instead of .zip files as 
HEXEDIT will allow you to replace each occurence of dsdl.

Original comment by lgilles69@gmail.com on 1 Sep 2010 at 9:32

GoogleCodeExporter commented 8 years ago 
igilles69:

I followed the guide exactly on a SnowLeo Mac here at work.

Unless I made the tar file incorrectly... What handles or command line switches 
should I be using?

Original comment by ralph.c...@gmail.com on 1 Sep 2010 at 10:39

GoogleCodeExporter commented 8 years ago 
Ok, I managed to tar the file up again and then I searched for "dsdl", not 
".dsdl" like comment #17 says. This may have been the error I made.

The extension is .dst so .dsdl is not what you should be searching for... it 
should be either "_dsdl" or "latest_dsdl".

I will see if it works when I get home.

Original comment by ralph.c...@gmail.com on 1 Sep 2010 at 11:00

GoogleCodeExporter commented 8 years ago 
in fact this will work for NETBOOKMAKER if you also remove the OSInstall.pkg 
from your dongle, you will be able to go till the end of install process.

Regarding NETBOOKINSTALLER, even with dsdl modification, you will still have a 
hang at generation of dsdt.aml. I suggest you proceed like that:
1- run NETBOOKINSTALLER 
2- wait for the install to hang at dsdt.aml generation
3- open a terminal (do not close NBI!!!)
4- type "sudo su"
5- enter your root or admin password
6- type "cd /Volumes/ramdisk/dsdt/"
7- type "mv latest_dsdt.dsl latest_dsdl.dsl"
8- come back to NBI, it should normally continue so you should be able to end 
up NBI process

You will also have a hang on reboot after OSX update, just shut down and 
restart, it should be OK.

Original comment by lgilles69@gmail.com on 2 Sep 2010 at 8:09

GoogleCodeExporter commented 8 years ago 
Well, none of these suggestions are working for me. By removing the 
OSInstall.pkg, I don't see how the install process proceeds properly. Yes, the 
installer finally shows success, but booting into the OS still crashes my 
netbook upon where the login screen/desktop should appear. Am I the only one 
having issues here??

Original comment by paxw...@gmail.com on 5 Sep 2010 at 12:17

GoogleCodeExporter commented 8 years ago 
So I made the modifications to the TAR image using HexEdit and upon running the 
newly modded USB drive it crashed at the apple logo screen.

Is there any way of running this in Verbose Mode so I can see what kernel panic 
I'm getting?

Original comment by ralph.c...@gmail.com on 5 Sep 2010 at 5:01

GoogleCodeExporter commented 8 years ago 
try to read the message error you get when booting OSX. If talking about I386, 
then you should boot using arch=i386 to use 32bit mode. If not, give us the 
error message.

Original comment by lgilles69@gmail.com on 5 Sep 2010 at 5:22

GoogleCodeExporter commented 8 years ago 
@paxwebb: setup will work as you keep osinstall.mpkg file
what is your netbook ?

Original comment by lgilles69@gmail.com on 5 Sep 2010 at 5:27

GoogleCodeExporter commented 8 years ago 
hmmm, i tried that already, installation showed as completed, but the netbook 
crashed at the login screen/desktop stage. Should I be running NBI from the 
installation disk after installing OSX? If so, what boxes should I tick. I'll 
try again.

I live in Shenzhen, China, 2 subway stations from the electronics market here. 
I have a recently released 11.1" Macbook Air Clone. Atom N270, GMA950. I can't 
really give you more info on the components inside this box, since my Chinese 
is not great, and the merchants often haven't a clue what they are selling 
anyways. It seems they just sell whatever the factory sends them, lol. Windows 
7 runs great on this, and I want to eventually dual boot. Right now I am just 
trying to get OSX 10.6.3 working on a single partition. I am installing with an 
original 10.6.0 installer modified with the latest NetbookBootMaker that I 
patched as per the instructions above.

Original comment by paxw...@gmail.com on 6 Sep 2010 at 3:04

GoogleCodeExporter commented 8 years ago 
One more thing... Before making the hex edit in the NetbookBootMaker file, the 
log shows the install hanging here:

OSInstaller[241]: ./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdl.dsl: No 
such file or directory

...now I get this error (after making the hex-edit change)

OSInstaller[249]: ./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdt.dsl: No 
such file or directory

So, even patching the TAR file seems to have not helped my installation. 
Granted, the installer does not get caught in a loop anymore, but the installer 
still hangs with 10-7 mins left (depending on my install options from the 
beginning), and a boot has the computer crashing where the grey apple logo 
disappears and the computer tries to access the finder/login screen.

Original comment by paxw...@gmail.com on 6 Sep 2010 at 3:38

GoogleCodeExporter commented 8 years ago 
paxweb said: ...now I get this error (after making the hex-edit change)

OSInstaller[249]: ./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdt.dsl: No 
such file or directory

Once you get to that point, snow leopard is already installed (Note the 
"postinstall" message)

Reboot using your usb drive and use netbookinstaller to install the Chameleon 
boot loader

Once there, you need to find the appropriate kexts to support whatever hardware 
you have.  A good place to find kexts is at kexts.com

Original comment by reesp...@consultant.com on 7 Sep 2010 at 5:15

GoogleCodeExporter commented 8 years ago 
Paxwebb and I have been trying to trouble shoot this.

Is anyone maintaining this project anymore, or... ?

Original comment by ralph.c...@gmail.com on 7 Sep 2010 at 8:20

GoogleCodeExporter commented 8 years ago 
rebooting only has the computer crash at the login/finder screen stage. Could 
this be an AppleIntelCPUPowerManagement kext issue? I heard somewhere in some 
cases we need to reboot with the battery out? Any other ideas?

Original comment by paxw...@gmail.com on 11 Sep 2010 at 2:22

GoogleCodeExporter commented 8 years ago 
Compare your procedure to this: 
http://code.google.com/p/eeepc1005ha-osx/issues/detail?id=2#c2

Original comment by reesp...@consultant.com on 13 Sep 2010 at 2:36

GoogleCodeExporter commented 8 years ago 
anything new to add here? I still can't get a working install of 10.6... :(

Original comment by paxw...@gmail.com on 20 Oct 2010 at 6:22

GoogleCodeExporter commented 8 years ago 
Test this out with the new version. let me know if the issue still persists.

Original comment by Meklort@gmail.com on 24 Nov 2010 at 11:04

GoogleCodeExporter commented 8 years ago 
Problem replicated with NetbookInstaller 0.8.5pre i.e. same error occurs when 
using the latest NBI.

I get the same './postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdt.dsl: No 
such file or directory' error

NBI 0.8.5pre appears to have a different file structure than 0.8.4 versions so 
I can not find reference to the problematic latest_dsdl.dsl file. I am also 
unable to mount the ramdisk while installing so I am unable to attempt to 
change the file name and make the install proceed.

Any ideas?

Original comment by scott.an...@gmail.com on 1 Dec 2010 at 3:56

GoogleCodeExporter commented 8 years ago 
It's fixed in this version:
http://dl.dropbox.com/u/863180/NetbookInstaller%2020101127091350.app.zip

Original comment by Meklort@gmail.com on 1 Dec 2010 at 4:11

GoogleCodeExporter commented 8 years ago 
Just grabbed it! Thanks, I will try when I get home from work tonight.

Original comment by scott.an...@gmail.com on 1 Dec 2010 at 4:13

GoogleCodeExporter commented 8 years ago 
Thanks! Solved this problem for me on asus 1001px

Original comment by aziz....@gmail.com on 2 Dec 2010 at 12:41

GoogleCodeExporter commented 8 years ago 
Can confirm, 20101127091350 does solve this problem.  Unfortunately the Asus 
1000HA has now lost its audio, but will investigate and file a different report.

Original comment by paul.tra...@gmail.com on 8 Dec 2010 at 5:36

GoogleCodeExporter commented 8 years ago 
Issue 318 has been merged into this issue.

Original comment by Meklort@gmail.com on 17 Dec 2010 at 2:28

GoogleCodeExporter commented 8 years ago 
Issue 179 has been merged into this issue.

Original comment by Meklort@gmail.com on 17 Dec 2010 at 2:29

GoogleCodeExporter commented 8 years ago 
Issue 241 has been merged into this issue.

Original comment by Meklort@gmail.com on 17 Dec 2010 at 2:30

GoogleCodeExporter commented 8 years ago 
Issue 43 has been merged into this issue.

Original comment by Meklort@gmail.com on 17 Dec 2010 at 2:31

GoogleCodeExporter commented 8 years ago 
Issue 178 has been merged into this issue.

Original comment by Meklort@gmail.com on 17 Dec 2010 at 2:31

GoogleCodeExporter commented 8 years ago 
Meklort, what about bootmaker? Do you have a "new one" of those by chance?

Original comment by ralph.c...@gmail.com on 26 Dec 2010 at 7:48

GoogleCodeExporter commented 8 years ago 
NetbookBootMaker is depreciated, use NetbookInstaller (specificaly 
http://dl.dropbox.com/u/863180/NetbookInstaller%2020101127091350.app.zip 
instead)

Original comment by Meklort@gmail.com on 26 Dec 2010 at 2:23

GoogleCodeExporter commented 8 years ago 
I did everything just like Comment 22 by lgilles69 said and it finished the 
Netbookinstaller process fine, the only thing is that it keeps hanging on the 
reboot screen when i start my Asus eee PC 1005ha. What should i do to make it 
reboot correctly?

Original comment by danielgo...@gmail.com on 27 Dec 2010 at 12:58

GoogleCodeExporter commented 8 years ago 
THANK YOU FOR THE FIXED VERSION :*

Original comment by robin.ts...@googlemail.com on 15 Feb 2011 at 1:54

GoogleCodeExporter commented 8 years ago 
Comment 22 was GREATLY USEFUL. Thanks.

Original comment by ArizonaN...@gmail.com on 20 Sep 2011 at 10:36