Hi,
I'm testing this library, it seems nice but I have a problem regarding voltage values that are given.
My battery is rated 24V, the epsolar is correctly set at 24V ("Charging equipment rated output voltage = 24.0V").
But the subsequent voltage values are all 12V based, examples:
Charging equipment output voltage = 12.96V
Battery's real rated power = 12.0V
High Volt.disconnect = 16.0V
Charging limit voltage = 15.0V
Over voltage reconnect = 15.0V
Equalization voltage = 14.6V
Boost voltage = 14.4V
Float voltage = 13.8V
Boost reconnect voltage = 13.2V
Low voltage reconnect = 12.6V
Under voltage recover = 12.2V
Under voltage warning = 12.0V
Low voltage disconnect = 11.1V
Discharging limit voltage = 10.6V
Do you know where it could come from (everything is reported correctly by the MT-50)
Hi, I'm testing this library, it seems nice but I have a problem regarding voltage values that are given. My battery is rated 24V, the epsolar is correctly set at 24V ("Charging equipment rated output voltage = 24.0V"). But the subsequent voltage values are all 12V based, examples:
Do you know where it could come from (everything is reported correctly by the MT-50)
Thanks :)