This emulator is still obviously in early stages, but so far it seems to be capable of running the Mailstation OS for its core functionality. The actual emulation is handled by the z80ex library.
A ROM image of the Mailstation codeflash, the main firmware, is required. By default, msemu looks for ./codeflash.bin, or the path can be specified on the command line. This can be used to switch between firmware versions or run custom code.
Functionality has really only been tested with DET1 models, firmware up to and 3.03A. It would be interesting to see what happens with other firmware versions.
Additionally, the Mailstation has a dataflash ROM inside. While not exactly required by msemu, an image is still needed. A real image can be used, or msemu can generate a blank one which the Mailstation firmware will initialize it for use. By default, this file is ./dataflash.bin if the path is not otherwise specified.
Once the Mailstation firmware is fully booted, it can be interacted with through the keyboard as on real hardware. Some keys are remapped. See below for key mappings in msemu.
There is also a very rudimentary interactive debugger implemented. This allows for setting a breakpoint on a specific PC address, single stepping (which also shows the current opcode and any IO or MEM accesses), and changing the current terminal verbosity output. More information about this is below.
F12 - Mailstation Power button
L_CTRL - Function/Fn
Home - Main
End - Back
Insert - Print
F1 - F1 (leftmost grey key underneath the LCD screen)
F2 - F2
F3 - F3
F4 - F4
F5 - F5 (rightmost grey key underneath the LCD screen)
F6 - @
F7 - Size
F8 - Check Spelling
F9 - Get E-MailThe graphical window has a couple of control keys:
ESC - Exits the emulator (this is a normal method of shutdown)
R_CTRL+R - Force emulator reset; Z80 resets to PC 0x0000The 'msemu' contains an interactive debugger. Be warned, its operation is very rough. Once 'msemu' is started, ctrl+c can be pressed on the terminal window, not the graphical LCD window, to break execution and issue a few simple commands. It allows for a single breakpoint to be set when the PC reaches the specified value.
Available commands:
f - Force debug printing o[F]f during exec
o - Force debug printing [O]n during exec
e - [E]xamine current registers
b - Set a [B]reakpoint on PC, 'b <PC>', -1 to disable
l - [L]ist the current breakpoint
h - Display this [H]elp menu
s - [S]ingle step execution
c - [C]ontinue execution
q - [Q]uit emulation and exit completelyNote that 'q' will exit the emulator the same as pressing ESC on the graphical window.
Things NOT emulated:
./external/Download-Deps.ps1 to install these.Create a build directory, run cmake, and build:
mkdir build
cd build
cmake ..
cmake --build .By default, cmake will configure the Debug configuration. Other options are Release, MinSizeRel, and RelWithDebInfo. These can be set like so:
cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo ..The application can be started from the build directory with:
./src/msemu -c /path/to/codeflash.bin -d /path/to/dataflash.binIf not provided, msemu will attempt to open ./codeflash.bin and ./dataflash.bin As noted above, codeflash.bin is required for execution as this is the main firmware ROM. If dataflash.bin is not provided, ./dataflash.bin will be created and populated.
This work was originally pioneered by and would not have existed without the effort put in by Fyberoptic. A huge thanks to Fyberoptic for letting development of this continue nearly a decade after it was originally started. The first major public release of msemu, marked rev 0.1a, was dated 2010/01/05. Original work unlicensed, licensed with permission. Splashscreen font by codeman38.