kimchi-project gingers390x issues

kimchi-project / gingers390x

Wok plug-in focused in s390x management

Other

6 stars 8 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Network: Minor UI Observations in "Network Configuration" and "Add Adapter" panel

#70 mesmriti opened 7 years ago
0
Enable/Disable lunc scan fails with 500 error

#69 sureshab opened 7 years ago
1
Wrong info provided while configuring adapter with port1

#68 sureshab closed 7 years ago
1
"Set OSA Port" - port number is not reflected in activity log

#67 sureshab closed 7 years ago
2
Minor UI Observations in "Add Adapter" panel

#66 sureshab opened 7 years ago
0
OSA port configuration for OSA Express card type network i/o devices

#65 sureshab closed 7 years ago
2
Delete option is not available for 'nic'

#64 atreyeemukhopadhyay opened 7 years ago
0
Remove Storage device not working

#63 rajatgupta21 opened 8 years ago
0
'Add SAN Adapter' button missing in Host -> Storage tab and San adapter listing fails

#62 sureshab opened 8 years ago
0
'Add Adapter' button missing in Host -> Network tab

#61 sureshab opened 8 years ago
0
UI not displaying FC luns listing

#60 pkulkark opened 8 years ago
1
Scalability: deletion of network interface message

#59 sureshab closed 8 years ago
1
No delete option for 'nic'

#58 atreyeemukhopadhyay closed 8 years ago
1
UI showing 'no result found' for FCP tape devices.

#57 atreyeemukhopadhyay opened 8 years ago
1
Miscellaneous issues in Storage devices section.

#56 atreyeemukhopadhyay opened 8 years ago
1
Making Refresh option look more elegant

#55 rajatgupta21 opened 8 years ago
0
Move button label to i18n and include buttons in html for translation

#54 pkulkark opened 8 years ago
0
Redesign "Add" dialog in "Network Configuration" section

#53 alinefm opened 8 years ago
0
missing user activity log for gingers390x plug in

#52 sureshab closed 7 years ago
2
Config information not accessible without authentication

#51 pkulkark opened 8 years ago
0
Add FCP devices cannot display more than 1023 luns per SAN Adapter per Controller

#50 pkulkark opened 8 years ago
1
[Accessibility : Focus & sequence ]Focus & sequence not implemented for Add FCP Storage page

#49 atreyeemukhopadhyay opened 8 years ago
0
[Accessibility : Keyboard & navigation] Add Adapter/ECKD/FCP Device page not getting closed using ESC button

#48 atreyeemukhopadhyay opened 8 years ago
0
[Accessibility : Alternative content ] Bootgrid search field and select elements does not contain alternative text

#47 atreyeemukhopadhyay opened 8 years ago
0
[Accessibility: Error Identification] Device Ids input field not getting focused on validation failure in Add ECKD device page.

#46 atreyeemukhopadhyay opened 8 years ago
0
[Accessibility: Error Identification] Device Ids input field not getting focused on validation failure in Add FCP SAN Adapter.

#45 atreyeemukhopadhyay opened 8 years ago
0
[Accessibility: Error Identification] Device Ids input field not getting focused on validation failure

#44 atreyeemukhopadhyay opened 8 years ago
0
"Add network adapter" shows infinite loading spin

#43 sureshab opened 8 years ago
1
With lun scan enabled, on "Add all/Lun scan" action UI does show if task got completed or still going on

#42 atreyeemukhopadhyay opened 8 years ago
0
Add FCP devices not listing all paths for XIV and DS8K type SAN controllers

#41 pkulkark opened 8 years ago
1
FCP listing fails with 500 when two sysadmin triggers listing on the same system

#40 pkulkark opened 8 years ago
1
FCP listing times out when large amount of FCP devices are enabled

#39 pkulkark opened 8 years ago
1
Unconfigure network interface fials

#38 sureshab closed 8 years ago
2
Add FCP Devices shows Loading.. forever in case when no zfcp adapter present

#37 pkulkark closed 8 years ago
2
table data not cleared after enable lun scan/disable lun scan

#36 sureshab closed 8 years ago
2
adding fcp device is not persisted

#35 sureshab closed 8 years ago
2
Removing an 'FC' Storage Device only removes a single path from the device

#34 pkulkark opened 8 years ago
1
LUN discovery fails if port has LUNs which are not LUN0

#33 harche closed 8 years ago
0
Message displayed while removing a storage device is not clear.

#32 pawankg closed 8 years ago
2
LUN discovery skips LUNs which have alphabet in their ID

#31 harche opened 8 years ago
0
Enable Lun scan --> Add All/ lun scan --> even after success, luns not listed in "storage devices" list

#30 harche opened 8 years ago
0
"Add FCP Devices" gives parsing error if /etc/zipl.conf has indented text.

#29 pkulkark opened 8 years ago
1
Removing Devices from Blacklist should refresh Parent Records

#28 sureshab closed 8 years ago
2
FCP disks deletion fails in multithreaded environment

#27 harche opened 8 years ago
1
NW UI: subchannels is not getting displayed in network setting panel

#26 archu-s closed 8 years ago
2
Storage-> FC LUNS. The error message while deleting a FC LUN path with invalid value is misleading.

#25 mesmriti opened 8 years ago
1
Add → FCP SAN Adapter Device does not update SAN Adapters listing

#24 rajatgupta21 closed 8 years ago
4
SAN Adapters Listing is not proper on UI

#23 rajatgupta21 opened 8 years ago
0
Enabling ECKD decive does not add in Storage device listing

#22 rajatgupta21 closed 8 years ago
2
ECKD Device listing is not proper

#21 rajatgupta21 opened 8 years ago
0