issues
search
kimchi-project
/
gingers390x
Wok plug-in focused in s390x management
Other
6
stars
8
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Network: Minor UI Observations in "Network Configuration" and "Add Adapter" panel
#70
mesmriti
opened
7 years ago
0
Enable/Disable lunc scan fails with 500 error
#69
sureshab
opened
7 years ago
1
Wrong info provided while configuring adapter with port1
#68
sureshab
closed
7 years ago
1
"Set OSA Port" - port number is not reflected in activity log
#67
sureshab
closed
7 years ago
2
Minor UI Observations in "Add Adapter" panel
#66
sureshab
opened
7 years ago
0
OSA port configuration for OSA Express card type network i/o devices
#65
sureshab
closed
7 years ago
2
Delete option is not available for 'nic'
#64
atreyeemukhopadhyay
opened
7 years ago
0
Remove Storage device not working
#63
rajatgupta21
opened
8 years ago
0
'Add SAN Adapter' button missing in Host -> Storage tab and San adapter listing fails
#62
sureshab
opened
8 years ago
0
'Add Adapter' button missing in Host -> Network tab
#61
sureshab
opened
8 years ago
0
UI not displaying FC luns listing
#60
pkulkark
opened
8 years ago
1
Scalability: deletion of network interface message
#59
sureshab
closed
8 years ago
1
No delete option for 'nic'
#58
atreyeemukhopadhyay
closed
8 years ago
1
UI showing 'no result found' for FCP tape devices.
#57
atreyeemukhopadhyay
opened
8 years ago
1
Miscellaneous issues in Storage devices section.
#56
atreyeemukhopadhyay
opened
8 years ago
1
Making Refresh option look more elegant
#55
rajatgupta21
opened
8 years ago
0
Move button label to i18n and include buttons in html for translation
#54
pkulkark
opened
8 years ago
0
Redesign "Add" dialog in "Network Configuration" section
#53
alinefm
opened
8 years ago
0
missing user activity log for gingers390x plug in
#52
sureshab
closed
7 years ago
2
Config information not accessible without authentication
#51
pkulkark
opened
8 years ago
0
Add FCP devices cannot display more than 1023 luns per SAN Adapter per Controller
#50
pkulkark
opened
8 years ago
1
[Accessibility : Focus & sequence ]Focus & sequence not implemented for Add FCP Storage page
#49
atreyeemukhopadhyay
opened
8 years ago
0
[Accessibility : Keyboard & navigation] Add Adapter/ECKD/FCP Device page not getting closed using ESC button
#48
atreyeemukhopadhyay
opened
8 years ago
0
[Accessibility : Alternative content ] Bootgrid search field and select elements does not contain alternative text
#47
atreyeemukhopadhyay
opened
8 years ago
0
[Accessibility: Error Identification] Device Ids input field not getting focused on validation failure in Add ECKD device page.
#46
atreyeemukhopadhyay
opened
8 years ago
0
[Accessibility: Error Identification] Device Ids input field not getting focused on validation failure in Add FCP SAN Adapter.
#45
atreyeemukhopadhyay
opened
8 years ago
0
[Accessibility: Error Identification] Device Ids input field not getting focused on validation failure
#44
atreyeemukhopadhyay
opened
8 years ago
0
"Add network adapter" shows infinite loading spin
#43
sureshab
opened
8 years ago
1
With lun scan enabled, on "Add all/Lun scan" action UI does show if task got completed or still going on
#42
atreyeemukhopadhyay
opened
8 years ago
0
Add FCP devices not listing all paths for XIV and DS8K type SAN controllers
#41
pkulkark
opened
8 years ago
1
FCP listing fails with 500 when two sysadmin triggers listing on the same system
#40
pkulkark
opened
8 years ago
1
FCP listing times out when large amount of FCP devices are enabled
#39
pkulkark
opened
8 years ago
1
Unconfigure network interface fials
#38
sureshab
closed
8 years ago
2
Add FCP Devices shows Loading.. forever in case when no zfcp adapter present
#37
pkulkark
closed
8 years ago
2
table data not cleared after enable lun scan/disable lun scan
#36
sureshab
closed
8 years ago
2
adding fcp device is not persisted
#35
sureshab
closed
8 years ago
2
Removing an 'FC' Storage Device only removes a single path from the device
#34
pkulkark
opened
8 years ago
1
LUN discovery fails if port has LUNs which are not LUN0
#33
harche
closed
8 years ago
0
Message displayed while removing a storage device is not clear.
#32
pawankg
closed
8 years ago
2
LUN discovery skips LUNs which have alphabet in their ID
#31
harche
opened
8 years ago
0
Enable Lun scan --> Add All/ lun scan --> even after success, luns not listed in "storage devices" list
#30
harche
opened
8 years ago
0
"Add FCP Devices" gives parsing error if /etc/zipl.conf has indented text.
#29
pkulkark
opened
8 years ago
1
Removing Devices from Blacklist should refresh Parent Records
#28
sureshab
closed
8 years ago
2
FCP disks deletion fails in multithreaded environment
#27
harche
opened
8 years ago
1
NW UI: subchannels is not getting displayed in network setting panel
#26
archu-s
closed
8 years ago
2
Storage-> FC LUNS. The error message while deleting a FC LUN path with invalid value is misleading.
#25
mesmriti
opened
8 years ago
1
Add → FCP SAN Adapter Device does not update SAN Adapters listing
#24
rajatgupta21
closed
8 years ago
4
SAN Adapters Listing is not proper on UI
#23
rajatgupta21
opened
8 years ago
0
Enabling ECKD decive does not add in Storage device listing
#22
rajatgupta21
closed
8 years ago
2
ECKD Device listing is not proper
#21
rajatgupta21
opened
8 years ago
0
Next