Closed frenchkiss38 closed 1 year ago
Sorry. I cant support on this as the port is different on your inverter. Have you tryed the rs485 port?
I think there is some tips you can use in this thread: https://powerforum.co.za/topic/8646-my-sunsynk-8kw-data-collection-setup/page/3/
SUN-SG03LP1 is a single phase inverter, the addresses are different from the LP3 but if you convert them it should work.
Also, it looks like you have only connected GND, RXD and TXD on the TTL to RS485 print? It needs 3.3v VCC as well.
As wrote, i cant support this as i don't have the inverter.
[hello,] I followed your tutorial but I have feedback at 0 in home assistant. I do not understand ...
I have model SUN-6K-SG03LP1-EU In the menu I am in MASTER modbus sn:01 Attached yaml file + logs
deye 6k.txt
logs_deye-6k_logs (1).txt