Open Starman99x opened 1 month ago
How on earth could those paths with slashes in that direction without drive letters have ever worked..
I used the content loader's direct file picker and it didn't work either, so it's not a playlist issue.
adf content works fine, tell me if you need specific info as I'm not that experienced:
[libretro INFO] Model: 'A500'
[libretro INFO] Kickstart: 'kick34005.A500'
[libretro INFO] M3U parsed, 2 file(s) found
[libretro INFO] Disk (1) inserted in drive DF0: '\RETRO\ROMS\Commodore - Amiga\Commodore - Amiga Disk\./Another World (Europe)/Another World (Europe) (Disk A).adf'
[libretro INFO] Disk (2) inserted in drive DF1: '\RETRO\ROMS\Commodore - Amiga\Commodore - Amiga Disk\./Another World (Europe)/Another World (Europe) (Disk B).adf'
[libretro INFO] Forcing PAL mode
[libretro INFO] --------------------------------------------------------------------------------
[libretro INFO] PUAE 5.3.0 527564f, Sep 27 2024 05:00:17
[libretro INFO] --------------------------------------------------------------------------------
[libretro INFO] Wait for blitter is not available in 68000/68010 cycle exact modes.
[libretro INFO] KS ver = 34 (0x22)
[libretro INFO] KS ver = 34 (0x22)
[libretro INFO] KS ver = 34 (0x22)
[libretro INFO] RTAREA located at 00F00000
[libretro INFO] TRAP_ENTRY = 00f021da
[libretro INFO] Known ROM 'KS ROM v1.3 (A500,A1000,A2000)' loaded
[libretro INFO] CPU cycleunit: 256 (0.500)
[libretro INFO] 1872 CPU functions
[libretro INFO] CPU cycleunit: 256 (0.500)
[libretro INFO] Building CPU, 44274 opcodes (0 -2 1)
[libretro INFO] CPU=68000, FPU=0, MMU=0, JIT=0. prefetch and cycle-exact 24-bit
[libretro INFO] Reset at 00000000. Chipset mask = 00000000
[libretro INFO] PAL mode V=50.0000Hz H=15625.0879Hz (227x312+0) IDX=10 (PAL) D=0 RTG=0/0
[libretro INFO] Autoconfig board list:
[libretro INFO] Card 01:
[libretro INFO] 'UAE Boot ROM' no autoconfig 00f00000 - 00f0ffff.
[libretro INFO] Card 02:
[libretro INFO] 'UAE FS ROM'
[libretro INFO] d1.52.40.00.07.db.00.00.00.03.20.00.00.00.00.00
[libretro INFO] MID 2011 (07db) PID 82 (52) SER 00000003
[libretro INFO] Z2 0x00e90000 0x00e90000 64K ROM 0
[libretro INFO] END
[libretro INFO] Card 0: skipping autoconfig (not autoconfig)
[libretro INFO] CPU cycleunit: 256 (0.500)
[libretro INFO] hardreset, memory cleared
[libretro INFO] SNDRATE 313.0*227.0*50.000000=3552550.000000
[libretro INFO] rndseed = 00000001 (1)
Here's how it works in PUAE 2021:
[libretro INFO] No model specified in: '\RETRO\ROMS\Commodore - Amiga\Another World (Europe).lha'
[libretro INFO] Model: 'A1200'
[libretro INFO] Kickstart: 'kick40068.A1200'
[libretro INFO] HD (1) inserted in drive DH0: '\RETRO\ROMS\Commodore - Amiga\Another World (Europe).lha'
[libretro INFO] Forcing PAL mode
[libretro INFO] --------------------------------------------------------------------------------
[libretro INFO] PUAE 2.6.1 1a534de, Sep 27 2024 04:40:07
[libretro INFO] --------------------------------------------------------------------------------
[libretro INFO] RTAREA located at 00F00000
[libretro INFO] Known ROM 'KS ROM v3.1 (A1200)' loaded
[libretro INFO] CPU cycleunit: 128 (0.250)
[libretro INFO] Building CPU table for configuration: 68020 ~cycle-exact 24-bit
[libretro INFO] 1883 CPU functions
[libretro INFO] Building CPU, 45954 opcodes (2 -1 1)
[libretro INFO] CPU=68020, FPU=0, MMU=0, JIT=CPU=0.
[libretro INFO] CPU cycleunit: 128 (0.250)
[libretro INFO] Reset at 00000000. Chipset mask = 00000007
[libretro INFO] PAL mode V=50.0000Hz H=15625.0879Hz (227x312+0) IDX=10 (PAL) D=0 RTG=0/0
[libretro INFO] hardreset, memory cleared
[libretro INFO] SNDRATE 312.0*227.0*50.000000=3541200.000000
[libretro INFO] SNDRATE 312.0*227.0*50.000000=3541200.000000
[libretro INFO] PAL mode V=50.0000Hz H=15625.0879Hz (227x312+0) IDX=10 (PAL) D=0 RTG=0/0
My .lha games used to run fine in previous versions, and still run fine on PUAE 2021 core, but the current version gives me this error message:
I tried cleaning save/WHDLoad folder, and resetting core options.
Here's some logging: