lincomatic/LeafCAN - Githubissues

The files in this project free software; you can redistribute and/or modify them under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

These files are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

CANMonitor.sch - Eagle schematic for CAN bus monitor LeafCAN.pde - AT90CAN128 Arduino sketch for Nissan Leaf SOC monitor LeafCAN.hex - precompiled HEX file flash.bat - MS batch file for setting fuses and flashing firmware

For more information on this project, see my blog: http://blog.lincomatic.com/?tag=can-bus

Many thanks to the members of the MyNissanLeaf forum, especially garygid, for all the groundwork which led to this project.

ChangeLog

20141030 SCL v2.01

minor cleanup of CanBusInterface class

20131121 SCL v2.00

added encoder stuff and rewrote w/ classes

20130321 SCL v1.3

added Adafruit 16x2 OLED support - #define ADA_OLED

20121002 SCL v1.3

added V2 hardware support
added FIXED_FUEL_BARS option
added SOCPCT_55B to show "true" SOC% from 55B message (when enabled, replaces amps in center of bottom line)

20120602 SCL v1.2

added power consumption in KW to line 2 of display (battery pack volts * amps)
added SHOW_KWH/SHOW_KW #defines, allowing users to revert to display style of v1.0 if desired

20120602 SCL v1.1

added remaining KWh to display
update display only once every 250ms to increase readability

v1.0 - initial release

lincomatic / LeafCAN

readme

Many thanks to the members of the MyNissanLeaf forum, especially garygid, for all the groundwork which led to this project.