search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

mks robin v2.3 & corexy #46

Closed rigimod closed 6 years ago

rigimod commented 6 years ago

Hello I made a corexy machine with mks robin v2.3 card, but I am having problems installing the software. axes work like cartesian. what do I need to do step by step? thank you img_6060 img_6070 img_6095

3Dangel commented 6 years ago

Rig mod,

You would need to go into the config.txt and change the machine type. And play around.

There will be very little support from China.

Good luck. Bob

On Sat, Jun 16, 2018 at 08:55 rigimod notifications@github.com wrote:

Hello I made a corexy machine with mks robin v2.3 card, but I am having problems installing the software. axes work like cartesian. what do I need to do step by step? thank you [image: img_6060] https://user-images.githubusercontent.com/19257577/41499710-7111400e-718d-11e8-9169-9fbb527bdeb2.JPG [image: img_6070] https://user-images.githubusercontent.com/19257577/41499711-713a4d5a-718d-11e8-87e3-7e69d23f376b.JPG [image: img_6095] https://user-images.githubusercontent.com/19257577/41499712-715e335a-718d-11e8-8f37-11846ffd2a16.JPG

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/46, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXUPTfpyBtDlnvcfw4XHyrpy_g6LZks5t9RxPgaJpZM4UqgZi .

makerbase-mks commented 6 years ago

You can configure your machine by following the information in the configuration file.