search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

Dual Extruder Setup CoreXY #96

Open The-V1p3r opened 5 years ago

The-V1p3r commented 5 years ago

Hi,

i'm using MKS Robin, and i want to set up a dual extruder on my core xy. I can enable the 2 extruders but i don't know how i set the distance between the Noozls in den Config. In the Machine settings just >EXT1_X_Offset and >EXT1_Y_Offset exist. Can i create >EXT0_X_OFFSET and >EXT0_Y_OFFSET?

elmo40 commented 5 years ago

EXT1 means second extruder. These offset values are in relation to EXT0 (first extruder) No need to make those values since they are the ones the bed is all relative to. (x min, x max...)