search

makerbase-mks / MKS-Robin2

MKS Robin2 is a powerful 32-bit 3D printer control board with STM32F407ZET6 . the CPU 168MHZ. Support MKS Robin TFT35 Screens, use RobinTFT35 can preview model. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://www.aliexpress.com/item/33006653472.html?spm=2114.12010612.8148356.3.334a65f4LZBtt2
17 stars 12 forks source link

MKS Robin 2 doesnt update firmware and doesnt work screen #5

Open active1878 opened 4 years ago

active1878 commented 4 years ago

İ connect my PC to MKS Robin 2 3d printer.i arrang eeeprom in repetier host program. After that i make change MKS Robin 2 config. And i install SD card MKS Robin 2. İ push the reset button.. than the screen and reset button doesnt work. i dosnt install New firmware SD card.the computer connect the card. What way Should i follow solve this problem

makerbase-mks commented 4 years ago

It is very likely that the EEPROM and SD card configuration parameters have been in the CRC check and are in an endless loop

albertopede commented 4 years ago

How is it solved? I think my Robin2 is the same ...