search

makerbase-mks / MKS-SBASE

MKS SBASE is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864 and MKS TFT Touch Screens（SBASE V1.4 support MKS LCD12864A/MINI12864/LCD2004）. The motherboard integrates 5 DRV8825 axis and it is use software set current, supports wired network for printing and supports firmware update by SD card…
https://www.aliexpress.com/item/32384368763.html?spm=2114.12010612.8148356.13.f6ef39440hYPmP
157 stars 112 forks source link

PT100 NOT WORKING #78

Closed anrual closed 4 years ago

anrual commented 6 years ago

Hello

I use de Firmware of MKS Sbase, with PT100.

But Is not Working

The last firmware of smoothiware add E3D amplifier, firmware of MKS Sbase is compatible with that

Somebody have de Config.txt and Firmware for this configuration

Thaks

pixel3design-hub commented 6 years ago

You will find it on smoothieware site. But beware that they modified the firmware to not work reliably on MKS boards. I found skipping a Lot of steps with latest firmwares... The latest working build is from agoust 2017

anrual commented 6 years ago

MKS BASE, it possible update firmware, for PT100 E3D work properly, with MKS SBASE?

it's possible change the last firmware smoothieware for work on MKS SBASE?