MKS SGEN_L V2.0 is powerful 32-bit 3D printer control board. The CPU is LPC1769 120MHZ, SGEN_L V2 hardware Integrated 4KB EEPROM, 5AXIS and dual Z interface, has 2 way FANs and Dc12/24V out interface, support TMC UART and SPI mode...
I have the SGen L V2 and I cannot get UART mode to work with the mks tmc2209 drivers. I have added the jumpers in the correct configuration for uart under the driver as well as configured marlin with uart and m122 enabled. Running m122 returns a bad response on all the drivers, meaning they are not connected with uart.
I have the SGen L V2 and I cannot get UART mode to work with the mks tmc2209 drivers. I have added the jumpers in the correct configuration for uart under the driver as well as configured marlin with uart and m122 enabled. Running m122 returns a bad response on all the drivers, meaning they are not connected with uart.