thank you for this project, I finally finished this project after 4 months ;)
even with the LED (sadly not original anymore)
build diary
printed
had to slice here, a corner was in the way
original LED, somehow I killed it later, so I had to use a very big and "normal" LED that I had to hone down from both sides
this is where the LED can be stored
how to store the flex cable
alternative LED with 330 resistor (< you need this)
my used iSight camera had no firewire adapter anymore, so I modeled with blender my own for USB (in my case I used a micro usb to usb-c amazon basics cable, an amazon kindle usb cable worked here also, pretty standard size)
thank you for this project, I finally finished this project after 4 months ;)
even with the LED (sadly not original anymore)
build diary
printed
had to slice here, a corner was in the way
original LED, somehow I killed it later, so I had to use a very big and "normal" LED that I had to hone down from both sides
this is where the LED can be stored
how to store the flex cable
alternative LED with 330 resistor (< you need this)
my used iSight camera had no firewire adapter anymore, so I modeled with blender my own for USB (in my case I used a micro usb to usb-c amazon basics cable, an amazon kindle usb cable worked here also, pretty standard size)
mark 1 without the support on both sides
mark 2 with supports to stabilize the camera
done :) thank you for watching
here is the download for .stl and .blend file
pisight_usb_adapter.zip