search

maxritter / diy-thermocam

A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware
http://www.diy-thermocam.net
GNU General Public License v3.0
1.1k stars 174 forks source link

issue with the screen #38

Closed younessazel closed 3 years ago

younessazel commented 6 years ago

hello; i have a problem with the screen ; i followed all steps of the firmware update guide and the thermocam lights up, but it shows me this message, although I touch the screen it does not change , i don't really know what is the problem, please ; I am looking for help : 43dd4d2c-07af-46ef-b1c4-aa598a797d4b 9202ff87-776c-4381-b8c2-ac85479c8baf

maxritter commented 6 years ago

Somehow the firmware expects you are using a Cheap-Thermocam V4 hardware build.. But I assume you built the DIY-Thermocam V2?

Make sure you use the right version of the MLX90614 spot sensor, which is MLX90614-BCF and the resistive version of the touch display. Otherwise it can not detect the right hardware version.