problem is existing on 3x Heltec V3.1 nodes: 2x ROUTER_CLIENT (WiFi+WWW) and 1x CLIENT mode (BLE+Adroid app). All flashed with full erase, with newest available stable FW (Meshtastic Firmware 2.3.10.d19607b Beta). Also, I turned off serial output.
The issue is only with MQTT, I haven't seen lost messages in LoRa (or maybe it's hard to catch).
Server: mqtt.meshtastic.org
MQTT group with 10-20 active nodes (~60 in total (not active), maybe 5 sending something from time to time).
What's happening:
Device OLED shows all messages correctly (I think, it's not 100% sure).
Node WWW page shows no messages, and after few hours there is like 3 of them.
Node Android app skips some messages, I'd say it's like about 10% lost.
This is quite frustrating, because I'm loosing information... even 10% loss on Android app is really bad.
If you need some additional info or specific tests and/or logs - I'll try to help.
Category
BLE, WiFi
Hardware
Heltec V3
Firmware Version
2.3.10.d19607b
Description
Hi,
problem is existing on 3x Heltec V3.1 nodes: 2x ROUTER_CLIENT (WiFi+WWW) and 1x CLIENT mode (BLE+Adroid app). All flashed with full erase, with newest available stable FW (Meshtastic Firmware 2.3.10.d19607b Beta). Also, I turned off serial output. The issue is only with MQTT, I haven't seen lost messages in LoRa (or maybe it's hard to catch).
Server: mqtt.meshtastic.org MQTT group with 10-20 active nodes (~60 in total (not active), maybe 5 sending something from time to time).
What's happening: Device OLED shows all messages correctly (I think, it's not 100% sure). Node WWW page shows no messages, and after few hours there is like 3 of them. Node Android app skips some messages, I'd say it's like about 10% lost.
This is quite frustrating, because I'm loosing information... even 10% loss on Android app is really bad.
If you need some additional info or specific tests and/or logs - I'll try to help.
BR, Doman.
Relevant log output
No response