search

milaq / rpi-rf

Sending and receiving 433MHz signals with cheap GPIO RF modules on a Raspberry Pi
BSD 3-Clause "New" or "Revised" License
494 stars 178 forks source link

Rpi-rf not working on Pi Zero W #60

Open juergen2345 opened 2 years ago

juergen2345 commented 2 years ago

Hi, i changed my pi4 to a zero w, and rpi-rf does not work. I use Rasbian Buster on both Pi‘s. Are there any known issues with a zero w? Thx

paf0186 commented 2 years ago

It would help to say more about what "does not work" means. What are you trying to do and what happens?

juergen2345 commented 2 years ago

Sorry. I tried to use it on a Pi Zero to switch Power Sockets

https://www.amazon.de/Brennenstuhl-Funkschalt-Set-Funksteckdosen-Funksteckdose-Kindersicherung/dp/B07CGBRS7T/ref=sr_1_10?__mk_de_DE=ÅMÅŽÕÑ&crid=Y24XGPR442ZN&keywords=brennenstuhl+steckdosen+funk&qid=1641540816&sprefix=brennstuhl+steckdose+funk%2Caps%2C102&sr=8-10

I used: Pulslength 325 Protokol 1 Codelength 24 repeat 10 and i also tried 100

nothing happend. On a pi3 or a pi4 everything works fine. A year ago, i used a Zero with this setup for an other receiver (with Pulslength 650) and it worked too. I think the Zero is not powerfull enough? Thx