PID tunnig tool not read the serial port

[SirGioVan]

The PID screen stays on gray window

.

[misan]

You need to figure out which one of the listed ports COM3 COM4 .. COM11 is the right port for your arduino. Latter, on line 26 you need to set the right number to where now says [4]. It seems from your screen that it is COM4 so you need to set it to [1] (as COM3 is [0]).

Give it a try.

On Sun, Sep 8, 2019 at 5:01 AM SirGioVan notifications@github.com wrote:

The PID screen stays on gray window

[image: PIDtool 2] https://user-images.githubusercontent.com/16431665/64482629-4132bb00-d1aa-11e9-9e44-a339754a0650.JPG

[image: image] https://user-images.githubusercontent.com/16431665/64482610-eb5e1300-d1a9-11e9-8265-40d1324a4403.png .

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/misan/dcservo/issues/63?email_source=notifications&email_token=AADRZSFWAOAOR7T75JN3QILQIRTIVA5CNFSM4IUSAICKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HJ7RO7Q, or mute the thread https://github.com/notifications/unsubscribe-auth/AADRZSBRAHFADYJHO7ENFQDQIRTIVANCNFSM4IUSAICA .

[misan]

or you can just make portName="COM4";

On Mon, Sep 9, 2019 at 10:32 AM Miguel Sanchez misan@disca.upv.es wrote:

You need to figure out which one of the listed ports COM3 COM4 .. COM11 is the right port for your arduino. Latter, on line 26 you need to set the right number to where now says [4]. It seems from your screen that it is COM4 so you need to set it to [1] (as COM3 is [0]).

Give it a try.

On Sun, Sep 8, 2019 at 5:01 AM SirGioVan notifications@github.com wrote:

The PID screen stays on gray window

[image: PIDtool 2] https://user-images.githubusercontent.com/16431665/64482629-4132bb00-d1aa-11e9-9e44-a339754a0650.JPG

[image: image] https://user-images.githubusercontent.com/16431665/64482610-eb5e1300-d1a9-11e9-8265-40d1324a4403.png .

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/misan/dcservo/issues/63?email_source=notifications&email_token=AADRZSFWAOAOR7T75JN3QILQIRTIVA5CNFSM4IUSAICKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HJ7RO7Q, or mute the thread https://github.com/notifications/unsubscribe-auth/AADRZSBRAHFADYJHO7ENFQDQIRTIVANCNFSM4IUSAICA .

[SirGioVan]

ys [4]. Apenas asi loqre que se mostrara en la consola que se conecto a la IP 192.168.1.239 , pero el motor no se mueve se queda estatico , pero si me conecto con Putty si acepta los comandos, estoy usando el ESP8266

[misan]

Serial connection is established, not sure what is wrong with it.

On Wed, Sep 11, 2019 at 8:21 AM SirGioVan notifications@github.com wrote:

ys [4]. Apenas asi loqre que se mostrara en la consola que se conecto a la IP 192.168.1.239 , pero el motor no se mueve se queda estatico , pero si me conecto con Putty si acepta los comandos, estoy usando el ESP8266 Diagrama.pdf https://github.com/misan/dcservo/files/3599288/Diagrama.pdf

[image: Conectaed] https://user-images.githubusercontent.com/16431665/64672651-e6ef5f80-d420-11e9-93f4-afd15f11ebd7.JPG

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/misan/dcservo/issues/63?email_source=notifications&email_token=AADRZSD7BYOTTHFRB7GE3I3QJCE63A5CNFSM4IUSAICKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6NMZXQ#issuecomment-530238686, or mute the thread https://github.com/notifications/unsubscribe-auth/AADRZSCLMMUKSGLKP3KUWKDQJCE63ANCNFSM4IUSAICA .