mongoose-os-apps / shelly-homekit

Apple HomeKit firmware for Shelly's
Other
1.71k stars 127 forks source link

Support for Shelly Plus 2PM #1013

Open herzkerl opened 2 years ago

herzkerl commented 2 years ago

I couldn‘t find any comments regarding the Plus 2PM, is there any news regarding this device?

jonasman commented 2 years ago

I also need this

Sorbat commented 1 year ago

is there anything new here? can you already say when an alpha/beta version will be available or is planned?

Thank you very much

1974here commented 1 year ago

Same here.. longing for a plus2 firmware. 🙂

MagOO33 commented 1 year ago

Hello, Shelly 2.5 is replaced by Shelly 2PM by resellers in my country because 2.5 has too many hardware problems. It would be very nice to have a mongoose support for this new shelly.

firstusing commented 1 year ago

Same here, could only get "plus 2pm´s" for my covers. I would too be happy to have a Firmware for it.

c4ris commented 1 year ago

a firmware would be nice

AG-dingoant commented 1 year ago

I just installed a Shelly 2 Plus. I would really like to have the firmware as well :-)

rojer commented 1 year ago

working on it, stay tuned

ghost commented 1 year ago

Hello Rojer, what shelly plus 2 PM will solve problem #985? Thank you very much.

rojer commented 1 year ago

who knows, maybe if it's to do with power measurement somehow. though Plus2PM uses the same power measurement chip, so it's unlikely.

ghost commented 1 year ago

Hello rojer, when I do not flash the shelly 2.5 my two large roller shutters work very well with the shelly application on the other hand when I flash them "HomeKit" the calibration hurts so the roller shutters do not close completely. Is it possible to solve this problem by putting a corrective update on shelly 2.5 or to do it on shelly plus 2PM? So that I know if I have to wait for the update of shelly 2.5 or if I need to buy shelly plus 2PM? Thank you very much

solitpapa commented 1 year ago

hi, as my 1st from 9 shellys 2.5 after almost 2 years of using starts to die I probably need to start thinking about change to 2PM. I also would appreciate the introduction of your firmware for that device.

azuma82 commented 1 year ago

Hello, I have also the new +2PM and will use it for optimized my fans system with the netatmo Wetterstation in Applehome. Thanks for you're work on it

andybenichou commented 1 year ago

Hi, thank you for your work it is amazing !! Sorry to ask but do you think the Shelly Plus 2PM will be supported soon, I am using homebridge now but it is not working well? Thank you!

jonasman commented 1 year ago

Gosh, my shellys 2.5PMs are all dying and im replacing with the new 2PM plus. Hopefully this could come soon :)

Tillman-Z commented 1 year ago

Hi there! Just wondering if there's any update on the status? It would be GREAT if all those 2PMs could be upgraded to HomeKit! 😄

jonasman commented 1 year ago

Hi! any update on this? any beta version to try?

Rickth64 commented 1 year ago

Would love to see this

bjoerrrn commented 1 year ago

looking forward to Shelly Plus 2PM support, too

tcdsantos commented 1 year ago

Hi! Is this project alive? Are there any plans to add support for Shelly Plus 2PM ? Thank you.

luisfernandes88 commented 1 year ago

One more 😀 we need this !

WeisserWolf611 commented 1 year ago

I think there will never come an Homekit-Image. Shelly will support matter and apple will support matter. So why waste time?!

rsalesas commented 1 year ago

Probably true at this point. I'm trying to decide if order something 2.5 or wait for Matter.

WeisserWolf611 commented 1 year ago

All my 2.5 died, so i replaced all with plus 2PM, but it is not working similar and I cant send it back to Allterco, so I have to wait for matter 🤷🏼‍♂️

luisfernandes88 commented 1 year ago

I think there will never come an Homekit-Image. Shelly will support matter and apple will support matter. So why waste time?!

Where did you see that info ? Shelly will support matter ?

Rickth64 commented 1 year ago

I think there will never come an Homekit-Image. Shelly will support matter and apple will support matter. So why waste time?!

Where did you see that info ? Shelly will support matter ?

https://www.reddit.com/r/shellycloud/comments/10a8bk7/finally_confirmed_matter_support/

timoschilling commented 1 year ago

There are still reasons why we will continue to work on this firmware. First matter didn't support all things we do in HomeKit. And how knows that matter support for shelly really comes? They already announced HomeKit support for the plus models and it never happened.

WeisserWolf611 commented 1 year ago

I think there will never come an Homekit-Image. Shelly will support matter and apple will support matter. So why waste time?!

Where did you see that info ? Shelly will support matter ?

Official answer ofrom Allterco: Thank you for contacting us! We are working on the Matter support. But only for Plus and Pro series.

harrisonkohn commented 1 year ago

Do we have any news on update for this any time soon? Is a unit needed to test?

davidjbradshaw commented 1 year ago

@harrisonkohn the other week they said June/July.

timoschilling commented 1 year ago

Please don’t discuss over matter support for the stock firmware here, that’s offtopic

WeisserWolf611 commented 1 year ago

Yeas ur right, but I think thats one reason why there is no homekit firmware… or where is the problem with Plus2PM?

timoschilling commented 1 year ago

I made some progress, but now I bricked my dev Plus2PM :(

5xPa commented 1 year ago

I would be happy to donate £25 to permit you to purchase a replacement. If you provide a link

Rickth64 commented 1 year ago

I was about to say the same. Let us know so you have a few to brick :-)

timoschilling commented 1 year ago

That would be nice https://paypal.me/timoschilling. Please use this link to support the Plus2PM development, the donate links in the repo readme and on the shelly ui are going to @rojer and I don't have access to that money.

5xPa commented 1 year ago

Timo have made the donation a small token of my appreciation of the work on the project. If for any reason the funds do not show up please let me know

On Fri, 27 Jan 2023 at 11:55, Timo Schilling @.***> wrote:

That would be nice https://paypal.me/timoschilling

— Reply to this email directly, view it on GitHub https://github.com/mongoose-os-apps/shelly-homekit/issues/1013#issuecomment-1406396075, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARF3VCAELPOE464VEM6CVR3WUOZTVANCNFSM5Y4AUPJQ . You are receiving this because you commented.Message ID: @.***>

hughfr4nc15 commented 1 year ago

+1

1974here commented 1 year ago

+1 Thanks for working on this project

duskiez commented 1 year ago

need this as well and will send a donation - thanks for working on this

timoschilling commented 1 year ago

Short update: I get HomeKit working on the 2PM. But now I burned my flasher and one of my Mac Book USB ports 🤦‍♂️. Open points are revertible to stock and power measurement.

jonasman commented 1 year ago

How did you burn the usb??

duskiez commented 1 year ago

Short update: I get HomeKit working on the 2PM. But now I burned my flasher and one of my Mac Book USB ports 🤦‍♂️. Open points are revertible to stock and power measurement.

Awesome, can’t wait for the release!

rsalesas commented 1 year ago

Really sorry you lost the port - is it repairable? Happy to contribute to compensate.

timoschilling commented 1 year ago

I was testing with the power measurement, so the Shelly was connected to main power and I miss wired my flasher, I forgot to plug the voltage isolator between the flasher and the Shelly. So the 230V from main went into the flasher. That killed the Shelly, the flasher and one of my USB ports. I think repeating would mean to replace the main board.

rsalesas commented 1 year ago

I don't think my contribution will cover that unfortunately! 😔

Ioan-Popovici commented 1 year ago

I was testing with the power measurement, so the Shelly was connected to main power and I miss wired my flasher, I forgot to plug the voltage isolator between the flasher and the Shelly. So the 230V from main went into the flasher. That killed the Shelly, the flasher and one of my USB ports. I think repeating would mean to replace the main board.

Unfortunate, but you should be able to replace the burned controller and port at a shop that still does hardware repair. Don't throw away the board yet ;)

Try to see if you can find someone in your area, it should be pretty cheap.

timoschilling commented 1 year ago

I worked on it, switch and garage door worked fine, but revertible to stock and power measurement are still open issues.

rsalesas commented 1 year ago

I would take those restrictions! Nice work!!

rsalesas commented 1 year ago

Not sure how else to send this but... I would definable buy all my Shelley's on Amazon through an associate link. Would compensate you for all the amazing work.