Camera stops streaming constantly requiring power cycle to work

[kalex1114]

Preliminary Docs

I confirm that I have read the CONTRIBUTING guide before opening this issue. yes I confirm that I have read the FAQ before opening this issue. yes

motionEyeOS Version

I am running motionEyeOS version: (insert your version here, e.g. 20180314). motionEyeOS dev20200223## Board Model

I am using the following board/model: (insert your board model here, e.g. Raspberry PI 3B+). Raspberry Pi 3 Model B Plus Rev 1.3

Camera

I am using the following type of camera: (choose from V4L2, MMAL, Network Camera, Fast Network Camera and Simple MJPEG Camera).

My camera model is: (insert your camera model, e.g. Logitech C290). V4L2 Camera

Network Connection

My motionEyeOS unit is connected to the network via: (choose your network connection, e.g. WiFi, Ethernet). Ethernet

Peripherals

I am using the following peripherals that I consider relevant to this issue:

• (e.g. USB WiFi adapter)
• (e.g. External Hard Disk) none

  Log Files

I consider the following log files relevant to this issue:

• (attach e.g. motioneye.log)
• (attach e.g. boot.l motion.log messages.log boot.log dmesg.log motioneye (1).log

Been happening for a while. It works fine and I'm able to get a feed in my blue iris v4. After a while I get No signal in blue iris. Logging into motioneye web gui i get a spinning circle on the camera. rebooting doesn't fix the issue but if i remove power and then power it on it starts working again.

Any ideas?

[kalex1114]

anyone?

[starbasessd]

I don't have a Blue Iris machine, but can reproduce everything else. I have a Generic USB (TIGA) camera. I use 20200203 (Non Dev) for Pi3B+ I have GigBit Ethernet. I Use both Network Watch and HTTP watch. I cannot reproduce your issue even with the Watch Functionality turned off. For testing purposes, can you install the 2020-02-05 version of Raspbian and install motionEye with the following setup instructions to see if it crashes? https://github.com/ccrisan/motioneye/wiki/Install-On-Raspbian

On Sun, Mar 8, 2020 at 7:43 PM kalex1114 notifications@github.com wrote:

anyone?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318?email_source=notifications&email_token=AEZTUHNPDAW7KQPBNJZ45Y3RGQ3RVA5CNFSM4LCRKU7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEOFE76Q#issuecomment-596267002, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHIVNYMZTMXX2WS6N3DRGQ3RVANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

Camera stops responding in motioneyes itself. When I access the webui in motioneyes I just get spinning circle and no video. I’ll try your link

[starbasessd]

Let me know, please.

On Sun, Mar 8, 2020 at 8:01 PM kalex1114 notifications@github.com wrote:

Camera stops responding in motioneyes itself. When I access the webui in motioneyes I just get spinning circle and no video. I’ll try your link

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318?email_source=notifications&email_token=AEZTUHLM2FFRVTISWWTODMLRGQ5YNA5CNFSM4LCRKU7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEOFFNPQ#issuecomment-596268734, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHMN23PTRDS2NTAN2JTRGQ5YNANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

I'm not seeing 2020-02-05 version. i do see Raspbian Buster Lite 2020-02-13

would this work?

[starbasessd]

Yeah, sorry. Too many systems, too many naming conventions...

On Mon, Mar 9, 2020 at 3:42 PM kalex1114 notifications@github.com wrote:

I'm not seeing 2020-02-05 version. i do see Raspbian Buster Lite 2020-02-13

would this work?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318?email_source=notifications&email_token=AEZTUHKPCZ2KRIABDNTDXTLRGVIE7A5CNFSM4LCRKU7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEOIZJIA#issuecomment-596743328, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHLCNAA5FU34MLGJ5XTRGVIE7ANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

Looks like I'm getting same issue with this install as well. Camera stops responding but webui still works fine

[starbasessd]

I am confused. (Easy at my age) You say you have a V4l2 camera. Where and how is it attached? Logs show trying to connect to a mjpeg camera. Looks like a lot of attempts at updating, too. Please try to re-image, use 20200203.

On Wed, Mar 11, 2020 at 10:09 AM kalex1114 notifications@github.com wrote:

Looks like I'm getting same issue with this install as well. Camera stops responding but webui still works fine

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-597656118, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHOBIQ4RTYQL2OYCW6TRG6LSDANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

I used Raspbian Buster Lite 2020-02-13 as you suggested earlier. and manually configured motioneyes using the link you provided.
Camera is attached via USB right into the pi. camera i'm using is ELP USB with Camera 2.1mm Lens 1080p Hd https://www.amazon.com/gp/product/B00KA7WSSU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[kalex1114]

So this is interesting. I went back to my motionOS motioneyes SD card but didn't connect it to blue iris and so far no disconnects and video is still present. Is it possible that pi is being overwhelmed by streaming it to blue iris? any setting i can adjust to get this working?

[starbasessd]

Curious. I wonder if is a CPU over-heat issue on the Pi. What are your settings under Video Streaming? Do you have heatsinks on the chips, or a fan on the case, or is it in a case with easily removed lid for testing? Do you see any warnings for throttling for low voltage?

On Mon, Mar 16, 2020 at 7:30 PM kalex1114 notifications@github.com wrote:

So this is interesting. I went back to my motionOS motioneyes SD card but didn't connect it to blue iris and so far no disconnects and video is still present. Is it possible that pi is being overwhelmed by streaming it to blue iris? any setting i can adjust to get this working?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-599803674, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHM3HN73NNNVLJJHD2LRH2ZC7ANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

no heatsinks on the chips and no fan but middle of the case is open I'm using POE for power. video streaming settings: where would i see warnings for low voltage? I don't have a screen hooked up to it. can you point me to which logs to check?

[kalex1114]

Found it. no under-voltage messages. I did find them for one day only back on 9/27 thats when i had it plugged in via usb cable instead of POE and was doing something. Other then that log is clean

[starbasessd]

Here's a way to monitor CPU and GPU temps. https://www.cyberciti.biz/faq/linux-find-out-raspberry-pi-gpu-and-arm-cpu-temperature-command/ Will try to get you a script in the AM (I'm EDT US East Coast time) to do some logging...

On Mon, Mar 16, 2020 at 8:45 PM kalex1114 notifications@github.com wrote:

Found it. no under-voltage messages. I did find them for one day only back on 9/27 thats when i had it plugged in via usb cable instead of POE and was doing something. Other then that log is clean

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-599821766, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHMJSTD3DMCAJGMDPY3RH3B2PANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

Thank you. I’m on east coast too

[starbasessd]

To log the temperature: ssh into the Pi (user=admin, password='blank by default, or whatever you set it to'

cd /data/usr nano pi_temp.sh

----- copy and paste -----:

!/bin/bash

Script: pi_temp.sh

Purpose: Display the ARM CPU and GPU temperature of Raspberry Pi 2/3

Author: Vivek Gite under GPL v2.x+

-------------------------------------------------------

cpu=$(</sys/class/thermal/thermal_zone0/temp) echo "$(date) @ $(hostname)" echo "-------------------------------------------" echo "GPU => $(/usr/bin/vcgencmd measure_temp)" echo "CPU => $((cpu/1000))'C" ----- end copy and paste -----

x y crontab -e ----- copy and paste ----- * * * * * /data/usr/pi_temp.sh >> /data/log/dmesg.log #every minute ----- end copy and paste ----- change first '*' to /2 for every other minute, /5 for every 5 minutes, etc. x y reboot Now, it will log the CPU and GPU temps to dmesg.log, and allow you to view from "Expert Settings" if you ssh in, you can view instant temperature with: /data/usr/pi_temp.sh or tail -f /data/log/dmesg.log DO NOT leave in this state. To turn off logging: crontab -e put a # at the beginning of the line. x y reboot Let me know what it shows. On Mon, Mar 16, 2020 at 8:55 PM kalex1114 wrote: > Thank you. I’m on east coast too > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > , > or unsubscribe > > . > -- Thanks Kevin Shumaker Personal Tech Support N38° 19' 56.52" W85° 45' 8.56" Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

done. running now. enabled blue iris to stream from motioneye and tracking temp. so far same as before CPU/GPU are hovering around 60c

[starbasessd]

Mine hovers around 45 no load, and 50 with 4 cameras (3 IP, one USB). Might be the heat issue.

If it is thermal throttling, you can adjust (slightly) to 70C by adding a line to /boot/config.txt temp_soft_limit=70 There is a software throttle in the newer kernels that starts tripping at 60C. It doesn't show as tripped until 80C. This shows what the init settings are vcgencmd get_config int To see if it's hit 80C since last boot: vcgencmd get_throttled

Let me know...

On Tue, Mar 17, 2020 at 11:05 AM kalex1114 notifications@github.com wrote:

done. running now. enabled blue iris to stream from motioneye and tracking temp. so far same as before CPU/GPU are hovering around 60c

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600121448, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHJU6J2YE4LTBR55GRTRH6GU5ANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

i didn't see any throttle messages in the logs this is now: [root@motioneye usr]# vcgencmd get_throttled throttled=0x80000

camera still good. will post results once it craps out [root@motioneye usr]# vcgencmd get_config int aphy_params_current=819 arm_freq=1400 audio_pwm_mode=514 config_hdmi_boost=5 core_freq=400 desired_osc_freq=0x331df0 desired_osc_freq_boost=0x3c45b0 disable_camera_led=1 disable_commandline_tags=2 disable_l2cache=1 display_hdmi_rotate=-1 display_lcd_rotate=-1 dphy_params_current=547 force_eeprom_read=1 force_pwm_open=1 framebuffer_ignore_alpha=1 framebuffer_swap=1 gpu_freq=300 init_uart_clock=0x2dc6c00 lcd_framerate=60 over_voltage_avs=0x124f8 over_voltage_avs_boost=0x2ab98 pause_burst_frames=1 program_serial_random=1 sdram_freq=450 hdmi_force_cec_address:0=65535 hdmi_force_cec_address:1=65535 hdmi_pixel_freq_limit:0=0x9a7ec80 hdmi_pixel_freq_limit:1=0x9a7ec80

[starbasessd]

Mine: [root@meye-1acf1ec2 media]# vcgencmd get_throttled throttled=0x0

I'll bet it's heat related. Watch the dmesg log for the temps. It's hit 80C at some point since last reboot.

On Tue, Mar 17, 2020 at 11:58 AM kalex1114 notifications@github.com wrote:

i didn't see any throttle messages in the logs this is now: [root@motioneye usr]# vcgencmd get_throttled throttled=0x80000

camera still good. will post results once it craps out

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600150442, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHLJAXI2G5S7KOR72ITRH6MZRANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

weird. script is not logging. i saw video feed stop and pulled temp. it was 62.9C . pulled log file but don't see temp readings in there Log attached. dmesg (1).log

[starbasessd]

In crontab -e change /data/log/dmesg.log to /data/log/temperature.log Also you are still using the DEV version: ---- booting motionEyeOS dev20200223 ---- change to the 20200203 version, please.

On Wed, Mar 18, 2020 at 2:45 PM kalex1114 notifications@github.com wrote:

weird. script is not logging. i saw video feed stop and pulled temp. it was 62.9C . pulled log file but don't see temp readings in there Log attached. dmesg (1).log https://github.com/ccrisan/motioneyeos/files/4350740/dmesg.1.log

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600799489, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHJ5DJGOVMT47JDCHNTRIEJDVANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[starbasessd]

And you are definitely getting toasty...

On Wed, Mar 18, 2020 at 2:45 PM kalex1114 notifications@github.com wrote:

weird. script is not logging. i saw video feed stop and pulled temp. it was 62.9C . pulled log file but don't see temp readings in there Log attached. dmesg (1).log https://github.com/ccrisan/motioneyeos/files/4350740/dmesg.1.log

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600799489, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHJ5DJGOVMT47JDCHNTRIEJDVANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

fixed the issue with crontab. it should have been */2 not /2. its loggging now

just checked for updates and no new versions are found: motionEye is up to date (current version: dev20200223)

[starbasessd]

Oops, probably a copy/paste error. Go manually download and re-image https://github.com/ccrisan/motioneyeos/releases/tag/20200203

On Wed, Mar 18, 2020 at 3:09 PM kalex1114 notifications@github.com wrote:

fixed the issue with crontab. it should have been */2 not /2. its loggging now

just checked for updates and no new versions are found: motionEye is up to date (current version: dev20200223)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600809786, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHLKCDAB2Y22JFBDJELRIEL5HANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

my version is newer i think should i downgrade?

[starbasessd]

Yes, please.

On Wed, Mar 18, 2020 at 3:37 PM kalex1114 notifications@github.com wrote:

my version is newer i think should i downgrade?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600821349, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHIC2YYIKP22ARW5UA3RIEPHPANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

any recommendations on cooling solution to get?

[starbasessd]

Depends more on which case you have. I prefer the PiMoroni shim, myself. https://learn.pimoroni.com/tutorial/sandyj/getting-started-with-fan-shim You don't have to run their software, but that's a nice bonus... Sometimes you can get away with just heatsinks, if you have a fairly open case.

On Wed, Mar 18, 2020 at 3:50 PM kalex1114 notifications@github.com wrote:

any recommendations on cooling solution to get?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600826801, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHNHK2IZ4BYB4EH2TM3RIEQXTANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

I'm using POE hat so i might try this outhttps://us.amazon.com/gp/product/B082ZJYCS3/ref=ox_sc_act_title_1?smid=A2IAB2RW3LLT8D&psc=1

[starbasessd]

For PoE I don't use hats, I use: https://www.amazon.com/UCTRONICS-PoE-Splitter-Gigabit-Raspberry/dp/B07CNKX14C

On Wed, Mar 18, 2020 at 4:25 PM kalex1114 notifications@github.com wrote:

I'm using POE hat so i might try this outhttps:// us.amazon.com/gp/product/B082ZJYCS3/ref=ox_sc_act_title_1?smid=A2IAB2RW3LLT8D&psc=1

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-600841490, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHIZ7ATTUVXUJKNCFJ3RIEU4FANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

Thank you. Ordered both to try out.

[kalex1114]

Got pimoroni installed. wow what a difference. Thank you [root@motioneye usr]# ./pi_temp.sh Sun Mar 22 18:01:16 EDT 2020 @ motioneye

GPU => temp=35.9'C CPU => 35'C

[starbasessd]

Awesome! Let me know if your overall issue is resolved, too.

On Sun, Mar 22, 2020 at 6:04 PM kalex1114 notifications@github.com wrote:

Got pimoroni installed. wow what a difference. Thank you [root@motioneye usr]# ./pi_temp.sh Sun Mar 22 18:01:16 EDT 2020 @ motioneye

GPU => temp=35.9'C CPU => 35'C [image: Screenshot 2020-03-22 18 04 15] https://user-images.githubusercontent.com/17240236/77261796-8f4f6d80-6c67-11ea-91ec-bd5a9efeedb8.png

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-602283214, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHIPTBQCBUZJKHNG64DRI2DQHANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

Crap. happened again. Temp never went above 38c and currently at 32c

[starbasessd]

Running for a long time at high heat can cause damage to the CPU/GPU & networking chips, too. I know in the server rooms, we panic if the temps get much higher than 40-50C which is why server rooms are kept so cold. RPi Foundation made it high priority, when the Pi4 came out to issue modified firmware to help cool it down, so quickly. I'm sorry, but at this point, I'm at a real loss for more Ideas.

On Mon, Mar 23, 2020 at 9:28 AM kalex1114 notifications@github.com wrote:

Crap. happened again. Temp never went above 38c and currently at 32c

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ccrisan/motioneyeos/issues/2318#issuecomment-602588332, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEZTUHKRY2SR74IEX5UWOIDRI5PXVANCNFSM4LCRKU7A .

-- Thanks

Kevin Shumaker

Personal Tech Support https://kevinshumaker.wixsite.com/thethirdlevel

N38° 19' 56.52" W85° 45' 8.56"

Semper Gumby “Don't tell people how to do things. Tell them what to do and let them surprise you with their results.” - G.S. Patton, Gen. USA Ethics are what we do when no one else is looking. Quis custodiet ipsos custodes? “There is no end to the good you can do if you don’t care who gets the credit.” - C Powell You know we're sitting on four million pounds of fuel, one nuclear weapon and a thing that has 270,000 moving parts built by the lowest bidder. Makes you feel good, doesn't it?

[kalex1114]

same. might try new pi