Raspberry Pi 3B+ reboot cycle seconds after boot up

[frakman1]

My setup used to work for years before finally failing due to constant reboots while booting up. I am using a 5V/2.5A power supply/adapter from Canakit so it's not voltage related. I don't see any obvious error messages in the bootup logs (included below).

Preliminary Docs

• [x] I confirm that I have read the CONTRIBUTING guide before opening this issue.

• [x] I confirm that I have read the FAQ before opening this issue.

motionEyeOS Version

I am running motionEyeOS version: Not sure since it doesn't fully boot. Looks like: [ 0.000000] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018

[ 0.070083] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35

Board Model

I am using the following board/model: Raspberry PI 3B+ (v1.2)

Camera

I am using the following type of camera: ribbon cable to onboard CSI port

My camera model is: Raspberry Pi Camera v1.3

Network Connection

My motionEyeOS unit is connected to the network via: hard wired

Peripherals

I am using the following peripherals that I consider relevant to this issue:

None

Log Files

I consider the following log files relevant to this issue:

Serial console boot log:

[   20.341487] reboot: Restarting system
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x37800000
[    0.000000] On node 0 totalpages: 229376
[    0.000000] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[    0.000000] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[    0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 loglevel=8 ipv6.disable=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80800000   (8160 kB)
[    0.000000]       .init : 0x80b00000 - 0x80c00000   (1024 kB)
[    0.000000]       .data : 0x80c00000 - 0x80c899f4   ( 551 kB)
[    0.000000]        .bss : 0x80c91114 - 0x80d41924   ( 707 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 24911 entries in 74 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000022] Switching to timer-based delay loop, resolution 52ns
[    0.000262] Console: colour dummy device 80x30
[    0.000905] console [tty1] enabled
[    0.000943] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000983] pid_max: default: 32768 minimum: 301
[    0.001293] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001325] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002268] Disabling memory control group subsystem
[    0.002364] CPU: Testing write buffer coherency: ok
[    0.002767] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003149] Setting up static identity map for 0x100000 - 0x10003c
[    0.003279] Hierarchical SRCU implementation.
[    0.003942] smp: Bringing up secondary CPUs ...
[    0.004634] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005372] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.006091] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.006193] smp: Brought up 1 node, 4 CPUs
[    0.006263] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.006284] CPU: All CPU(s) started in HYP mode.
[    0.006302] CPU: Virtualization extensions available.
[    0.007128] devtmpfs: initialized
[    0.017658] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.017908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017951] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.018534] pinctrl core: initialized pinctrl subsystem
[    0.019293] NET: Registered protocol family 16
[    0.021935] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.026745] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.026777] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.026972] Serial: AMBA PL011 UART driver
[    0.028549] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.029007] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.060405] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[    0.061821] SCSI subsystem initialized
[    0.062060] usbcore: registered new interface driver usbfs
[    0.062127] usbcore: registered new interface driver hub
[    0.062228] usbcore: registered new device driver usb
[    0.070083] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[    0.071464] clocksource: Switched to clocksource arch_sys_counter
[    0.144907] VFS: Disk quotas dquot_6.6.0
[    0.145032] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.145234] FS-Cache: Loaded
[    0.145447] CacheFiles: Loaded
[    0.154211] NET: Registered protocol family 2
[    0.154933] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.155061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.155263] TCP: Hash tables configured (established 8192 bind 8192)
[    0.155407] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.155467] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.155713] NET: Registered protocol family 1
[    0.156166] RPC: Registered named UNIX socket transport module.
[    0.156189] RPC: Registered udp transport module.
[    0.156208] RPC: Registered tcp transport module.
[    0.156227] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.157436] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.160216] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.168199] FS-Cache: Netfs 'nfs' registered for caching
[    0.168800] NFS: Registering the id_resolver key type
[    0.168846] Key type id_resolver registered
[    0.168865] Key type id_legacy registered
[    0.170718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.170860] io scheduler noop registered
[    0.170881] io scheduler deadline registered
[    0.171162] io scheduler cfq registered (default)
[    0.171185] io scheduler mq-deadline registered
[    0.171204] io scheduler kyber registered
[    0.173938] BCM2708FB: allocated DMA memory f7910000
[    0.173982] BCM2708FB: allocated DMA channel 0 @ b8813000
[    0.181755] Console: switching to colour frame buffer device 82x26
[    0.188089] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.191255] bcm2835-rng 3f104000.rng: hwrng registered
[    0.193350] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.197681] vc-sm: Videocore shared memory driver
[    0.199891] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.213252] brd: module loaded
[    0.223681] loop: module loaded
[    0.225599] Loading iSCSI transport class v2.0-870.
[    0.228152] libphy: Fixed MDIO Bus: probed
[    0.230122] usbcore: registered new interface driver lan78xx
[    0.232079] usbcore: registered new interface driver smsc95xx
[    0.233920] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.463879] Core Release: 2.80a
[    0.465767] Setting default values for core params
[    0.467718] Finished setting default values for core params
[    0.669947] Using Buffer DMA mode
[    0.671922] Periodic Transfer Interrupt Enhancement - disabled
[    0.673985] Multiprocessor Interrupt Enhancement - disabled
[    0.676033] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.678043] Dedicated Tx FIFOs mode
[    0.680372] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[    0.684361] FIQ FSM acceleration enabled for :
[    0.684361] Non-periodic Split Transactions
[    0.684361] Periodic Split Transactions
[    0.684361] High-Speed Isochronous Endpoints
[    0.684361] Interrupt/Control Split Transaction hack enabled
[    0.693696] dwc_otg: Microframe scheduler enabled
[    0.695623] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[    0.697560] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[    0.699472] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[    0.701479] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.703439] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.705431] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.707410] Init: Port Power? op_state=1
[    0.709316] Init: Power Port (0)
[    0.711350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.713314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.715251] usb usb1: Product: DWC OTG Controller
[    0.717148] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[    0.719088] usb usb1: SerialNumber: 3f980000.usb
[    0.721548] hub 1-0:1.0: USB hub found
[    0.723363] hub 1-0:1.0: 1 port detected
[    0.725587] dwc_otg: FIQ enabled
[    0.727306] dwc_otg: NAK holdoff enabled
[    0.729022] dwc_otg: FIQ split-transaction FSM enabled
[    0.730779] Module dwc_common_port init
[    0.732731] usbcore: registered new interface driver usb-storage
[    0.734669] mousedev: PS/2 mouse device common for all mice
[    0.736501] IR NEC protocol handler initialized
[    0.738275] IR RC5(x/sz) protocol handler initialized
[    0.740065] IR RC6 protocol handler initialized
[    0.741840] IR JVC protocol handler initialized
[    0.743526] IR Sony protocol handler initialized
[    0.745195] IR SANYO protocol handler initialized
[    0.746843] IR Sharp protocol handler initialized
[    0.748464] IR MCE Keyboard/mouse protocol handler initialized
[    0.750083] IR XMP protocol handler initialized
[    0.752384] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.754311] bcm2835-cpufreq: min=600000 max=1200000
[    0.756306] sdhci: Secure Digital Host Controller Interface driver
[    0.758006] sdhci: Copyright(c) Pierre Ossman
[    0.760019] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.762152] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.764109] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.767392] ledtrig-cpu: registered to indicate activity on CPUs
[    0.769505] hidraw: raw HID events driver (C) Jiri Kosina
[    0.771676] usbcore: registered new interface driver usbhid
[    0.773628] usbhid: USB HID core driver
[    0.776124] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[    0.779437] [vc_sm_connected_init]: start
[    0.788162] [vc_sm_connected_init]: end - returning 0
[    0.790698] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.793074] Initializing XFRM netlink socket
[    0.795105] NET: Registered protocol family 17
[    0.797204] Key type dns_resolver registered
[    0.799744] Registering SWP/SWPB emulation handler
[    0.802420] registered taskstats version 1
[    0.810082] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.812279] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.817900] console [ttyS0] disabled
[    0.819973] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 166, base_baud = 31250000) is a 16550
[    0.951540] Indeed it is in host mode hprt0 = 00021501
[    1.171483] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.171606] Indeed it is in host mode hprt0 = 00001101
[    1.431718] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.431727] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.432275] hub 1-1:1.0: USB hub found
[    1.432355] hub 1-1:1.0: 5 ports detected
[    1.771478] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.931695] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.931704] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.934192] smsc95xx v1.0.6
[    1.982338] console [ttyS0] enabled
[    1.988845] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.996868] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    2.044687] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[    2.062173] sdhost: log_buf @ b7907000 (f7907000)
[    2.105227] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.114424] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.123607] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.133960] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.151485] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.159933] of_cfs_init
[    2.164390] of_cfs_init: OK
[    2.169541] Waiting for root device /dev/mmcblk0p2...
[    2.264288] mmc1: new high speed SDIO card at address 0001
[    2.292092] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.310061] mmc0: new high speed SDHC card at address e624
[    2.318128] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[    2.329403]  mmcblk0: p1 p2 p3
[    2.357977] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[    2.369335] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.381548] devtmpfs: mounted
[    2.389797] Freeing unused kernel memory: 1024K
[    2.798948] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.934411] media: Linux media interface: v0.10
[    2.963024] Linux video capture interface: v2.00
[    2.992965] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    3.037030] bcm2835-v4l2: scene mode selected 0, was 0
[    3.045080] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[    3.062643] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[    3.176121] i2c /dev entries driver
[    3.478417] udevd[216]: starting version 3.2.4
[    3.526353] udevd[217]: starting eudev-3.2.4
[    3.708305] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    3.723921] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[    3.862576] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[    3.874008] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[    3.888669] usbcore: registered new interface driver brcmfmac
[    4.112205] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[    4.129905] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38 
[   20.191489] reboot: Restarting system

cmdline.txt:

dwc_otg.fiq_fix_enable=1 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 loglevel=8 ipv6.disable=1

config.txt:

gpu_mem=128
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=spi=on
dtparam=audio=on
disable_camera_led=1
enable_uart=1

[starbasessd]

What changed? What USB device(s) do you have plugged in? can you grab the /data/log/dmesg.log and /data/log/messages please?

[frakman1]

Thank you for your response. Nothing changed. It just stopped working one day and wouldn't show up on the network, I had to enable logs on the flash drive files before I could see the reboot cycle logs. I have no USB devices plugged in at all. It's just got a network cable hooked up and the CSI camera. Now, not even the network cable is connected while I troubleshoot. I even disconnected the camera for good measure but still the same behaviour. It's in a reboot cycle so unfortunately no interactive prompt and no access to any files.

Are there any other logs I can enable in the config/cmdline.txt files that would help?

[starbasessd]

Do you have access to a Linux PC to read the 3rd partition?

[frakman1]

Oh you mean mounting the flash drive and reading the ext4 partitions? Yes, I think I can do that on my Mac.

[starbasessd]

Let me know.

[frakman1]

I was (finally) able to mount and read the ext4 partition on my Mac. The messages file is 3.5GB and the last 5000 line or so just look like this:

Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: the_buffer index 1 Address (73406000)
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 1) vid_source->pframe 1
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 2) vid_source->pframe 1
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 3) vid_source->pframe 2 vid_source->buf.index 2
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: vid_source->buf.bytesused 3110400
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: the_buffer index 2 Address (73109000)
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 1) vid_source->pframe 2
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 2) vid_source->pframe 2
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 3) vid_source->pframe 3 vid_source->buf.index 3
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: vid_source->buf.bytesused 3110400
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: the_buffer index 3 Address (72e0c000)
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 1) vid_source->pframe 3
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 2) vid_source->pframe 3
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: 3) vid_source->pframe 0 vid_source->buf.index 0
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: vid_source->buf.bytesused 3110400
Feb 12 14:18:30 piCam1 user.debug motion: [1:ml1] [DBG] [VID] v4l2_capture: the_buffer index 0 Address

dmesg.log shows the last few hundred lines look like this:

---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 18:59:59 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 18:59:59 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 18:59:59 1969] devtmpfs: mounted
[Wed Dec 31 18:59:59 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:01 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:01 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:01 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:01 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:01 1969] i2c /dev entries driver
[Wed Dec 31 19:00:01 1969] udevd[216]: starting version 3.2.4
[Wed Dec 31 19:00:02 1969] udevd[218]: starting eudev-3.2.4
[Wed Dec 31 19:00:02 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:02 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:02 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:02 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:04 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:05 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:05 1969] system date is 2023-02-02 00:00:20
[Wed Dec 31 19:00:08 1969] random: crng init done
[Thu Jan  1 18:59:48 1970] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 18:59:59 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 18:59:59 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 18:59:59 1969] devtmpfs: mounted
[Wed Dec 31 18:59:59 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:01 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:01 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:01 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:01 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:01 1969] i2c /dev entries driver
[Wed Dec 31 19:00:01 1969] udevd[220]: starting version 3.2.4
[Wed Dec 31 19:00:01 1969] udevd[221]: starting eudev-3.2.4
[Wed Dec 31 19:00:02 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:02 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:02 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:02 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:04 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:04 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:05 1969] system date is 2023-02-03 00:00:18
[Wed Dec 31 19:00:08 1969] random: crng init done
[Thu Jan  1 18:59:50 1970] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 18:59:59 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 18:59:59 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 18:59:59 1969] devtmpfs: mounted
[Wed Dec 31 18:59:59 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:00 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:00 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:00 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:00 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:00 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:00 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:00 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:00 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:00 1969] i2c /dev entries driver
[Wed Dec 31 19:00:01 1969] udevd[217]: starting version 3.2.4
[Wed Dec 31 19:00:01 1969] udevd[218]: starting eudev-3.2.4
[Wed Dec 31 19:00:01 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:01 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:01 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:01 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:01 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:01 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:03 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:04 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:04 1969] system date is 2023-02-04 00:00:18
[Wed Dec 31 19:00:08 1969] random: crng init done
[Thu Jan  1 18:59:49 1970] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 18:59:59 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 18:59:59 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 18:59:59 1969] devtmpfs: mounted
[Wed Dec 31 18:59:59 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:01 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:01 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:01 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:01 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:01 1969] i2c /dev entries driver
[Wed Dec 31 19:00:02 1969] udevd[217]: starting version 3.2.4
[Wed Dec 31 19:00:02 1969] udevd[218]: starting eudev-3.2.4
[Wed Dec 31 19:00:02 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:02 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:02 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:02 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:04 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:05 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:05 1969] system date is 2023-02-05 00:00:19
[Wed Dec 31 19:00:08 1969] random: crng init done
[Thu Jan  1 18:59:49 1970] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 18:59:59 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 18:59:59 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 18:59:59 1969] devtmpfs: mounted
[Wed Dec 31 18:59:59 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:01 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:01 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:01 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:01 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:01 1969] i2c /dev entries driver
[Wed Dec 31 19:00:01 1969] udevd[219]: starting version 3.2.4
[Wed Dec 31 19:00:01 1969] udevd[220]: starting eudev-3.2.4
[Wed Dec 31 19:00:01 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:02 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:02 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:04 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:04 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:05 1969] system date is 2023-02-06 00:00:18
[Wed Dec 31 19:00:07 1969] random: crng init done
[Thu Jan  1 18:04:48 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 18:59:49 1970] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 18:59:59 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 18:59:59 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 18:59:59 1969] devtmpfs: mounted
[Wed Dec 31 18:59:59 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:01 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:01 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:01 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:01 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:01 1969] i2c /dev entries driver
[Wed Dec 31 19:00:02 1969] udevd[218]: starting version 3.2.4
[Wed Dec 31 19:00:02 1969] udevd[219]: starting eudev-3.2.4
[Wed Dec 31 19:00:02 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:02 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:02 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:02 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:04 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:05 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:05 1969] system date is 2023-02-07 00:00:20
[Wed Dec 31 19:00:08 1969] random: crng init done
[Wed Dec 31 19:00:45 1969] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 02:01:29 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 04:13:32 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 04:13:54 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 04:15:00 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 04:15:22 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 04:15:44 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 04:16:06 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 05:03:29 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 05:03:53 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 05:04:37 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 05:06:05 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 05:07:11 1970] bcm2835-v4l2: error 0 waiting for frame completion
[Thu Jan  1 05:07:55 1970] bcm2835-v4l2: error[Wed Dec 31 19:47:37 1969] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K available (7168K kernel code, 550K rwdata, 2056K rodata, 1024K init, 706K bss, 21832K reserved, 8192K cma-reserved)
[Wed Dec 31 18:59:59 1969] Virtual kernel memory layout:
[Wed Dec 31 18:59:59 1969] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Wed Dec 31 18:59:59 1969] ftrace: allocating 24911 entries in 74 pages
[Wed Dec 31 18:59:59 1969] Hierarchical RCU implementation.
[Wed Dec 31 18:59:59 1969] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Wed Dec 31 18:59:59 1969] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Wed Dec 31 18:59:59 1969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Wed Dec 31 18:59:59 1969] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Wed Dec 31 18:59:59 1969] Switching to timer-based delay loop, resolution 52ns
[Wed Dec 31 18:59:59 1969] Console: colour dummy device 80x30
[Wed Dec 31 18:59:59 1969] console [tty1] enabled
[Wed Dec 31 18:59:59 1969] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Wed Dec 31 18:59:59 1969] pid_max: default: 32768 minimum: 301
[Wed Dec 31 18:59:59 1969] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Wed Dec 31 18:59:59 1969] Disabling memory control group subsystem
[Wed Dec 31 18:59:59 1969] CPU: Testing write buffer coherency: ok
[Wed Dec 31 18:59:59 1969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Wed Dec 31 18:59:59 1969] Setting up static identity map for 0x100000 - 0x10003c
[Wed Dec 31 18:59:59 1969] Hierarchical SRCU implementation.
[Wed Dec 31 18:59:59 1969] smp: Bringing up secondary CPUs ...
[Wed Dec 31 18:59:59 1969] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Wed Dec 31 18:59:59 1969] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Wed Dec 31 18:59:59 1969] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Wed Dec 31 18:59:59 1969] smp: Brought up 1 node, 4 CPUs
[Wed Dec 31 18:59:59 1969] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Wed Dec 31 18:59:59 1969] CPU: All CPU(s) started in HYP mode.
[Wed Dec 31 18:59:59 1969] CPU: Virtualization extensions available.
[Wed Dec 31 18:59:59 1969] devtmpfs: initialized
[Wed Dec 31 18:59:59 1969] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Wed Dec 31 18:59:59 1969] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Wed Dec 31 18:59:59 1969] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] pinctrl core: initialized pinctrl subsystem
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 16
[Wed Dec 31 18:59:59 1969] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Wed Dec 31 18:59:59 1969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Wed Dec 31 18:59:59 1969] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Wed Dec 31 18:59:59 1969] Serial: AMBA PL011 UART driver
[Wed Dec 31 18:59:59 1969] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Wed Dec 31 18:59:59 1969] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Wed Dec 31 18:59:59 1969] SCSI subsystem initialized
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbfs
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver hub
[Wed Dec 31 18:59:59 1969] usbcore: registered new device driver usb
[Wed Dec 31 18:59:59 1969] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-23 16:35
[Wed Dec 31 18:59:59 1969] clocksource: Switched to clocksource arch_sys_counter
[Wed Dec 31 18:59:59 1969] VFS: Disk quotas dquot_6.6.0
[Wed Dec 31 18:59:59 1969] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Wed Dec 31 18:59:59 1969] FS-Cache: Loaded
[Wed Dec 31 18:59:59 1969] CacheFiles: Loaded
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 2
[Wed Dec 31 18:59:59 1969] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Wed Dec 31 18:59:59 1969] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Wed Dec 31 18:59:59 1969] TCP: Hash tables configured (established 8192 bind 8192)
[Wed Dec 31 18:59:59 1969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 1
[Wed Dec 31 18:59:59 1969] RPC: Registered named UNIX socket transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered udp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp transport module.
[Wed Dec 31 18:59:59 1969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Wed Dec 31 18:59:59 1969] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Wed Dec 31 18:59:59 1969] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Wed Dec 31 18:59:59 1969] FS-Cache: Netfs 'nfs' registered for caching
[Wed Dec 31 18:59:59 1969] NFS: Registering the id_resolver key type
[Wed Dec 31 18:59:59 1969] Key type id_resolver registered
[Wed Dec 31 18:59:59 1969] Key type id_legacy registered
[Wed Dec 31 18:59:59 1969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Wed Dec 31 18:59:59 1969] io scheduler noop registered
[Wed Dec 31 18:59:59 1969] io scheduler deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler cfq registered (default)
[Wed Dec 31 18:59:59 1969] io scheduler mq-deadline registered
[Wed Dec 31 18:59:59 1969] io scheduler kyber registered
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA memory f7910000
[Wed Dec 31 18:59:59 1969] BCM2708FB: allocated DMA channel 0 @ b8813000
[Wed Dec 31 18:59:59 1969] Console: switching to colour frame buffer device 82x26
[Wed Dec 31 18:59:59 1969] bcm2835-rng 3f104000.rng: hwrng registered
[Wed Dec 31 18:59:59 1969] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Wed Dec 31 18:59:59 1969] vc-sm: Videocore shared memory driver
[Wed Dec 31 18:59:59 1969] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Wed Dec 31 18:59:59 1969] brd: module loaded
[Wed Dec 31 18:59:59 1969] loop: module loaded
[Wed Dec 31 18:59:59 1969] Loading iSCSI transport class v2.0-870.
[Wed Dec 31 18:59:59 1969] libphy: Fixed MDIO Bus: probed
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver lan78xx
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver smsc95xx
[Wed Dec 31 18:59:59 1969] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Wed Dec 31 18:59:59 1969] Core Release: 2.80a
[Wed Dec 31 18:59:59 1969] Setting default values for core params
[Wed Dec 31 18:59:59 1969] Finished setting default values for core params
[Wed Dec 31 18:59:59 1969] Using Buffer DMA mode
[Wed Dec 31 18:59:59 1969] Periodic Transfer Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] Multiprocessor Interrupt Enhancement - disabled
[Wed Dec 31 18:59:59 1969] OTG VER PARAM: 0, OTG VER FLAG: 0
[Wed Dec 31 18:59:59 1969] Dedicated Tx FIFOs mode
[Wed Dec 31 18:59:59 1969] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Wed Dec 31 18:59:59 1969] FIQ FSM acceleration enabled for :
[Wed Dec 31 18:59:59 1969] dwc_otg: Microframe scheduler enabled
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805d86e0
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:460: FIQ ASM at 0x805d8a3c length 36
[Wed Dec 31 18:59:59 1969] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887e000
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Wed Dec 31 18:59:59 1969] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Wed Dec 31 18:59:59 1969] Init: Port Power? op_state=1
[Wed Dec 31 18:59:59 1969] Init: Power Port (0)
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Wed Dec 31 18:59:59 1969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Wed Dec 31 18:59:59 1969] usb usb1: Product: DWC OTG Controller
[Wed Dec 31 18:59:59 1969] usb usb1: Manufacturer: Linux 4.14.30-v7 dwc_otg_hcd
[Wed Dec 31 18:59:59 1969] usb usb1: SerialNumber: 3f980000.usb
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: USB hub found
[Wed Dec 31 18:59:59 1969] hub 1-0:1.0: 1 port detected
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: NAK holdoff enabled
[Wed Dec 31 18:59:59 1969] dwc_otg: FIQ split-transaction FSM enabled
[Wed Dec 31 18:59:59 1969] Module dwc_common_port init
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usb-storage
[Wed Dec 31 18:59:59 1969] mousedev: PS/2 mouse device common for all mice
[Wed Dec 31 18:59:59 1969] IR NEC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC5(x/sz) protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR RC6 protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR JVC protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sony protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR SANYO protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR Sharp protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR MCE Keyboard/mouse protocol handler initialized
[Wed Dec 31 18:59:59 1969] IR XMP protocol handler initialized
[Wed Dec 31 18:59:59 1969] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Wed Dec 31 18:59:59 1969] bcm2835-cpufreq: min=600000 max=1200000
[Wed Dec 31 18:59:59 1969] sdhci: Secure Digital Host Controller Interface driver
[Wed Dec 31 18:59:59 1969] sdhci: Copyright(c) Pierre Ossman
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Wed Dec 31 18:59:59 1969] sdhci-pltfm: SDHCI platform and OF driver helper
[Wed Dec 31 18:59:59 1969] ledtrig-cpu: registered to indicate activity on CPUs
[Wed Dec 31 18:59:59 1969] hidraw: raw HID events driver (C) Jiri Kosina
[Wed Dec 31 18:59:59 1969] usbcore: registered new interface driver usbhid
[Wed Dec 31 18:59:59 1969] usbhid: USB HID core driver
[Wed Dec 31 18:59:59 1969] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: start
[Wed Dec 31 18:59:59 1969] [vc_sm_connected_init]: end - returning 0
[Wed Dec 31 18:59:59 1969] ip_tables: (C) 2000-2006 Netfilter Core Team
[Wed Dec 31 18:59:59 1969] Initializing XFRM netlink socket
[Wed Dec 31 18:59:59 1969] NET: Registered protocol family 17
[Wed Dec 31 18:59:59 1969] Key type dns_resolver registered
[Wed Dec 31 18:59:59 1969] Registering SWP/SWPB emulation handler
[Wed Dec 31 18:59:59 1969] registered taskstats version 1
[Wed Dec 31 18:59:59 1969] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Wed Dec 31 18:59:59 1969] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Wed Dec 31 18:59:59 1969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Wed Dec 31 18:59:59 1969] sdhost: log_buf @ b7907000 (f7907000)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Wed Dec 31 18:59:59 1969] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Wed Dec 31 18:59:59 1969] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Wed Dec 31 18:59:59 1969] of_cfs_init
[Wed Dec 31 18:59:59 1969] of_cfs_init: OK
[Wed Dec 31 18:59:59 1969] Waiting for root device /dev/mmcblk0p2...
[Wed Dec 31 18:59:59 1969] Indeed it is in host mode hprt0 = 00021501
[Wed Dec 31 18:59:59 1969] mmc1: new high speed SDIO card at address 0001
[Wed Dec 31 18:59:59 1969] mmc0: host does not support reading read-only switch, assuming write-enable
[Wed Dec 31 18:59:59 1969] mmc0: new high speed SDHC card at address e624
[Wed Dec 31 18:59:59 1969] mmcblk0: mmc0:e624 SL32G 29.7 GiB
[Wed Dec 31 18:59:59 1969]  mmcblk0: p1 p2 p3
[Wed Dec 31 19:00:00 1969] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[Wed Dec 31 19:00:00 1969] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 31 19:00:00 1969] devtmpfs: mounted
[Wed Dec 31 19:00:00 1969] Freeing unused kernel memory: 1024K
[Wed Dec 31 19:00:00 1969] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Wed Dec 31 19:00:00 1969] Indeed it is in host mode hprt0 = 00001101
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Wed Dec 31 19:00:00 1969] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: USB hub found
[Wed Dec 31 19:00:00 1969] hub 1-1:1.0: 5 ports detected
[Wed Dec 31 19:00:00 1969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Wed Dec 31 19:00:00 1969] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Wed Dec 31 19:00:00 1969] smsc95xx v1.0.6
[Wed Dec 31 19:00:00 1969] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:82:6c:6d
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): recovery complete
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[Wed Dec 31 19:00:01 1969] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[Wed Dec 31 19:00:01 1969] EXT4-fs (mmcblk0p2): re-mounted. Opts: block_validity,delalloc,norecovery,barrier,user_xattr,acl
[Wed Dec 31 19:00:01 1969] media: Linux media interface: v0.10
[Wed Dec 31 19:00:01 1969] Linux video capture interface: v2.00
[Wed Dec 31 19:00:01 1969] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: scene mode selected 0, was 0
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1920x1200
[Wed Dec 31 19:00:01 1969] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded.
[Wed Dec 31 19:00:01 1969] i2c /dev entries driver
[Wed Dec 31 19:00:01 1969] udevd[218]: starting version 3.2.4
[Wed Dec 31 19:00:01 1969] udevd[219]: starting eudev-3.2.4
[Wed Dec 31 19:00:02 1969] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Wed Dec 31 19:00:02 1969] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Wed Dec 31 19:00:02 1969] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Wed Dec 31 19:00:02 1969] usbcore: registered new interface driver brcmfmac
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
[Wed Dec 31 19:00:02 1969] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.6.3 Inc Compiler: 1.29.4 Inc ClmImport: 1.31.4 Creation: 2016-08-29 20:46:38
[Wed Dec 31 19:00:02 1969] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Wed Dec 31 19:00:04 1969] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Wed Dec 31 19:00:04 1969] IPv6: Loaded, but administratively disabled, reboot required to enable
[Wed Dec 31 19:00:05 1969] system date is 2023-02-12 00:00:18
[Wed Dec 31 19:00:09 1969] random: crng init done
[Thu Jan  1 18:59:50 1970] bcm2835-v4l2: error 0 waiting for frame completion
---- booting motionEyeOS 20180627 ----
[Wed Dec 31 18:59:59 1969] Booting Linux on physical CPU 0x0
[Wed Dec 31 18:59:59 1969] Linux version 4.14.30-v7 (root@042a70bf8ec8) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08)) #1 SMP Thu Jun 28 20:57:53 UTC 2018
[Wed Dec 31 18:59:59 1969] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Wed Dec 31 18:59:59 1969] CPU: div instructions available: patching division code
[Wed Dec 31 18:59:59 1969] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Wed Dec 31 18:59:59 1969] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Wed Dec 31 18:59:59 1969] Memory policy: Data cache writealloc
[Wed Dec 31 18:59:59 1969] cma: Reserved 8 MiB at 0x37800000
[Wed Dec 31 18:59:59 1969] On node 0 totalpages: 229376
[Wed Dec 31 18:59:59 1969] free_area_init_node: node 0, pgdat 80c7ef00, node_mem_map b7016000
[Wed Dec 31 18:59:59 1969]   Normal zone: 2016 pages used for memmap
[Wed Dec 31 18:59:59 1969]   Normal zone: 0 pages reserved
[Wed Dec 31 18:59:59 1969]   Normal zone: 229376 pages, LIFO batch:31
[Wed Dec 31 18:59:59 1969] random: fast init done
[Wed Dec 31 18:59:59 1969] percpu: Embedded 17 pages/cpu @b6fbf000 s38604 r8192 d22836 u69632
[Wed Dec 31 18:59:59 1969] pcpu-alloc: s38604 r8192 d22836 u69632 alloc=17*4096
[Wed Dec 31 18:59:59 1969] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Wed Dec 31 18:59:59 1969] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Wed Dec 31 18:59:59 1969] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.fiq_fix_enable=1 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro rootflags=noload panic=10 quiet loglevel=1 ipv6.disable=1
[Wed Dec 31 18:59:59 1969] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Wed Dec 31 18:59:59 1969] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Wed Dec 31 18:59:59 1969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Wed Dec 31 18:59:59 1969] Memory: 887480K/917504K

[starbasessd]

Out of curiosity how much free space is available on each of the 3 partitions? Can you also post the /data/log/boot.log please?

[frakman1]

Well, it looked like the main partion was almost full so I deleted the massive messages file and some media files for good measure.

It didn't make a difference and it keeps rebooting at the same place. It's strange that there are no errors in the logs.

Filesystem                Size   Used  Avail Capacity iused      ifree %iused  Mounted on
msdos://disk4s1/NO NAME   20Mi  8.8Mi   11Mi    44%       1          0  100%   /Volumes/NO NAME
/dev/disk4s3              30Gi   11Gi   18Gi    38%    1949    1935763    0%   /Volumes/Untitled 1
/dev/disk4s2             180Mi  173Mi  7.4Mi    96%    7223      38961   16%   /Volumes/Untitled

Showing the last few iterations of boot.log:

---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Remounting boot partition read-write: done
 * Remounting root partition read-write: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: dhcp
 * Setting current date using http: Thu Feb 9 00:00:18 EST 2023
 * Starting http date updater: done
 * Starting crond: done
 * Starting sshd: done
 * Starting proftpd: done
 * Starting smbd: done
 * Star---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Remounting boot partition read-write: done
 * Remounting root partition read-write: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: dhcp
 * Setting current date using http: Fri Feb 10 00:00:22 EST 2023
 * Starting http date updater: done
 * Starting crond: done
 * Starting sshd: done
 * Starting proftpd: done
 * Starting smbd: done
 * Starting nmbd: done
 * Starting motioneye: done
 * Executing user init script: Starting ngrok-eye
Starting ngrok-eye2
Starting tailscale
done
 # Interface eth0 has IP address 10.0.0.205/24
 # Default gateway is 10.0.0.1
 # DNS server address is 69.252.80.80
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: done
 * Stopping smbd: done
 * Stopping nmbd: done
 * Stopping proftpd: done
 * Stopping sshd: done
 * Stopping crond: done
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Remounting boot partition read-write: done
 * Remounting root partition read-write: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: dhcp
 * Setting current date using http: Sat Feb 11 00:00:20 EST 2023
 * Starting http date updater: done
 * Starting crond: done
 * Starting sshd: done
 * Starting proftpd: done
 * Starting smbd: done
 * Starting nmbd: done
 * Starting motioneye: done
 * Executing user init script: Starting ngrok-eye
Starting ngrok-eye2
Starting tailscale
done
 # Interface eth0 has IP address 10.0.0.205/24
 # Default gateway is 10.0.0.1
 # DNS server address is 69.252.80.80
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Remounting boot partition read-write: done
 * Remounting root partition read-write: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: dhcp
PING 10.0.0.1 (10.0.0.1): 56 data bytes

--- 10.0.0.1 ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
PING 10.0.0.1 (10.0.0.1): 56 data bytes

--- 10.0.0.1 ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
PING 192.168.1.1 (192.168.1.1): 56 data bytes

--- 192.168.1.1 ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
 * Setting current date using http: failed
 * Starting http date updater: done
 * Starting crond: done
 * Starting sshd: done
 * Starting proftpd: done
 * Starting smbd: done
 * Starting nmbd: done
 * Starting motioneye: done
 * Executing user init script: Starting ngrok-eye
Starting ngrok-eye2
Starting tailscale
done
 # DNS server address is 69.252.80.80
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: done
 * Stopping smbd: done
 * Stopping nmbd: done
 * Stopping proftpd: done
 * Stopping sshd: done
 * Stopping crond: done
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Remounting boot partition read-write: done
 * Remounting root partition read-write: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: dhcp
 * Setting current date using http: Sun Feb 12 00:00:18 EST 2023
 * Starting http date updater: done
 * Starting crond: done
 * Starting sshd: done
 * Starting proftpd: done
 * Starting smbd: done
 * Starting nmbd: done
 * Starting motioneye: done
 * Executing user init script: Starting ngrok-eye
Starting ngrok-eye2
Starting tailscale
done
 # Interface eth0 has IP address 10.0.0.205/24
 # Default gateway is 10.0.0.1
 # DNS server address is 69.252.80.80
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: done
 * Stopping smbd: done
 * Stopping nmbd: done
 * Stopping proftpd: done
 * Stopping sshd: done
 * Stopping crond: done
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: no link
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: failed
 * Stopping smbd: failed
 * Stopping nmbd: failed
 * Stopping proftpd: failed
 * Stopping sshd: failed
 * Stopping crond: failed
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: no link
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: failed
 * Stopping smbd: failed
 * Stopping nmbd: failed
 * Stopping proftpd: failed
 * Stopping sshd: failed
 * Stopping crond: failed
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: no link
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: failed
 * Stopping smbd: failed
 * Stopping nmbd: failed
 * Stopping proftpd: failed
 * Stopping sshd: failed
 * Stopping crond: failed
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: no link
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: failed
 * Stopping smbd: failed
 * Stopping nmbd: failed
 * Stopping proftpd: failed
 * Stopping sshd: failed
 * Stopping crond: failed
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done

[frakman1]

One of the last things I did was add a nightly reboot via /etc/crontabs/root:

0 0 * * * /sbin/reboot

I thought that might be kicking in due to a race condition before it gets system time and thinks it has to reboot right away because it thinks it's midnight.

I tried deleting the file but it comes right back. I modified it to 10 10 * * * /sbin/reboot but no change in behavior (confirmed file was updated) I deleted the line but also no change in behavior (confirmed file was updated)

[starbasessd]

From the boot.log:

---- booting motionEyeOS 20180627 ----

• Detecting disk device: /dev/mmcblk0
• Mounting filesystems: done
• Loading kernel modules: done
• Setting hostname: done
• Starting syslogd: done
• Configuring CPU frequency: done
• Starting throttle watcher: done
• Starting eudev: done
• Starting watchdog: done
• Configuring wired network: no link ---- shutting down motionEyeOS 20180627 ----

A this is a Very old version, which the Pi4 didn't exist then, so I don't know where you got it. B It is not seeing a link for the Ethernet, or WiFi, which will cause a panic reboot in all models. C The first version supporting the Pi4 was 20190904, but if you are going to upgrade, I would go with dev20201026.

[frakman1]

A This is not running on a RPi4. It's a RP3+ as indicated in the Board Model section above. A I got it from the release page. It's an official image. B OK, by the time I got the serial console on, I had disconnected the network cable. It wasn't working even with the network cable connected so I will try reconnecting it and looking at the logs again. C I was planning on upgrading to the latest since I am in the best position to do so now but I want to get to the bottom of this first otherwise I might just get the same error on the new one and lose all my customizations/configurations.

[starbasessd]

A your title says Pi4... B Look at the LEDs for the Ethernet port on the Pi. If they aren't lighting up, try a diferent port on the switch/router, or try another known good Ethernet cable. C for the Pi3B+ be sure to use this download

[frakman1]

Oops! You're right. Sorry about that. Must have been a typo. Will fix it... Both sides had blinking lights when plugged in. I tried various routers and switches. I'll report back when I have more data.

[frakman1]

OK, I put some text at the end of boot.log, connected the network cable (LEDs blinking) and I still get the same behavior. I don't understand how not having a network link should cause a kernel panic and reboot. I don'tknow of any system that reboots because it doesn't have a working network connection. Is this specific to motioneyeos?

boot.log:

//////////////////////////////////////////////////////////////////////////////////////////////////
START
//////////////////////////////////////////////////////////////////////////////////////////////////
---- booting motionEyeOS 20180627 ----
 * Detecting disk device: /dev/mmcblk0
 * Mounting filesystems: done
 * Loading kernel modules: done
 * Setting hostname: done
 * Starting syslogd: done
 * Configuring CPU frequency: done
 * Starting throttle watcher: done
 * Starting eudev: done
 * Starting watchdog: done
 * Configuring wired network: no link
---- shutting down motionEyeOS 20180627 ----
 * Stopping motioneye: failed
 * Stopping smbd: failed
 * Stopping nmbd: failed
 * Stopping proftpd: failed
 * Stopping sshd: failed
 * Stopping crond: failed
 * Stopping date updater: done
 * Stopping network: done
 * Stopping eudev: done
 * Stopping throttle watcher: done
 * Stopping syslogd: done
 * Detecting disk device: /dev/mmcblk0

[frakman1]

Just as an FYI, I installed the latest release on a different SD card and when I ran it on the same RPI3B+, it comes up all the way, gets an IP address and lets me login via the webUI.

This tells me there's nothing wrong with the hardware or network cables etc.

Any troubleshooting ideas are welcome, otherwise, I might just start over again from scratch with the new one.

[frakman1]

Of course, now I find out that Google Drive uploads don't work with the new version. Another reason I don't like to upgrade unecessarily. I see that there is an issue tracking that and that it is not resolved because Google shutdown access to apps using older authentication/login methods and motioneyos hasn't updated the login logic yet.

[starbasessd]

Yes the panic reboot is specific to motionEyeOS intentionally, as it is written for headless use, and if there isn't a network, and it is headless, then there is no way to access it. Your message https://github.com/motioneye-project/motioneyeos/issues/2978#issuecomment-1433928246 indicates that the original SD Card has some corruption in the system. Since there are many upgrades between the version that has issues, and the latest, you wouldn't be able to do a simple backup/restore anyway, re-creating your camera settings is going to be the best option. You MIGHT be able to re-load the old version, but I doubt GDrive will work even with the old key as the changes made were on Google's side. If you were to attempt it, I would copy all the motion and motioneye and camera files from /data/etc/ on the old SD Card and put them in the new card... (you have to mount the partition as R/W in your Mac to do so, I believe)...

[frakman1]

Thank you for your insight. You may be right about the old SD card corruption although it appears to be functional (read and writeable, folders intact) but there's no telling if some system file is corrupt or not.

Unfortunately, part of Google's troubleshooting instructions involved deleting the permitted third party app on Google's security page and re-adding it, only to later find that re-adding is not possible (!!) Unfortunately, no reversion is possible now (with backed up keys/files) even though it was working the last time I checked about a week ago. Oh well. I hope motioneyeos updates Google Drive integration because that was the only and most convenient way for me to view the recordings remotely and in a browser without any fuss.

[starbasessd]

I don't know how bad you want to save on GDrive, but... You can get the GDrive mounted on Windows and Mac (and Linux) and share the folder to motionEyeOS (I've done it recently on a Debian install of motionEye and had GDrive mounted on it, and used the folder...

[frakman1]

Nice thought. Can I install rclone on the motionEyeOS directly and access it that way?

[starbasessd]

Unfortunately, not easily. dpkg, and apt are not available in motionEyeOS. If files can be copied to the correct folders, maybe, but that is WAY beyond any support I provide here.

[frakman1]

Out of curiousity:

• How do I disable the 'reboot when no network detected' logic?
• How do I get the serial console to be interactive and allow me to login. I would like to troubleshoot directly via serial console without the need for network access. Currently it stops logging when it gets network access around here and does not respond to user keyboard input:

  7.359066] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  [    8.524611] IPv6: Loaded, but administratively disabled, reboot required to enable
  [    9.055255] system date is 2023-02-18 08:50:10

[starbasessd]

Here are several links to adjust settings: Watchdog settings os startup is the location for disabling network services if no network: OS_NETWORKLESS, but this disables any service that requires/uses networking.

Setting up serial console should be similar to any other Raspbian Buster with the exception of some commands are missing.

What is your goal? If you plug in a monitor and keyboard, it works normally, with read access to /boot & /, and full access to /data

[starbasessd]

The primary description of the config files in the last 2-3 versions is here:Configuration

[frakman1]

Thanks for the network related links.

As for serial, I enabled the UART via the changes to thecmdline.txt and config.txt files described above.

I hooked up a USB-to-serial console cable (like this )to the UART ports of the Pi and connected to my laptop and am able to get serial console logs but they are non-interactive and stops logging after a brief blurb at bootup (stops after network access)

Normally, I am able to login and access the Linux # console via serial console ports connected to other Raspberry Pis with just those changes. MotionEyeOS seems to have a different serial console configuration unless I am doing something wrong. The only way to get to the interactive console now is to ssh in. My goal is to do this over serial console so I can troubleshoot the original problem with the older software on the other SD card. Currently, this is not possible since it keeps rebooting and I have to keep taking out the SD card, mount it on my laptop and view the boot.log file for clues.

[frakman1]

In other news, I was able to get rclone to work using a helpful motioneyos extension project but had to update the rclone binary to 1.60.1 first.

[starbasessd]

In other news, I was able to get rclone to work using a helpful motioneyos extension project but had to update the rclone binary to 1.60.1 first.

Very cool. Didn't know this existed. Will try it soon...

[starbasessd]

Thanks for the network related links.

As for serial, I enabled the UART via the changes to thecmdline.txt and config.txt files described above.

I hooked up a USB-to-serial console cable (like this )to the UART ports of the Pi and connected to my laptop and am able to get serial console logs but they are non-interactive and stops logging after a brief blurb at bootup (stops after network access)

Normally, I am able to login and access the Linux # console via serial console ports connected to other Raspberry Pis with just those changes. MotionEyeOS seems to have a different serial console configuration unless I am doing something wrong. The only way to get to the interactive console now is to ssh in. My goal is to do this over serial console so I can troubleshoot the original problem with the older software on the other SD card. Currently, this is not possible since it keeps rebooting and I have to keep taking out the SD card, mount it on my laptop and view the boot.log file for clues.

Since motionEyeOS is not running an a 'real' Debian or Raspberry Pi OS, I do not know what alteration(s) were made to the kernel and support files in BuildRoot. The instructions are there to BYO but even they are 2+ years out of date, and RPiFoundation has made major changes as well, in both Buster and Bullseye... I am a masochist and support the Last Know Good because I believe(d) in it and still use it myself, and couldn't pay Calin money, but helped support his software as that is where my skill set lies...

[frakman1]

In other news, I was able to get rclone to work using a helpful motioneyos extension project but had to update the rclone binary to 1.60.1 first.

Very cool. Didn't know this existed. Will try it soon...

Yup, instead of just doing a cronjob, I put the rclone command directly into the WebUI field of command to run when a media file is created:

Hopefully, this functionality might one day be built in to motioneyeos. I created an app in Google Console with it's own client id/secret for better performance. Using default rclone settings uses a shared service that everyone uses that is rate limited.

My configs for reference:

/usr/bin/rclone.config

[GoogleDrive]
type = drive
client_id = xxxxapps.googleusercontent.com
client_secret = xxxx
scope = drive
root_folder_id =
team_drive =
token = {"access_token":"xxx","token_type":"Bearer","refresh_token":"xxxx","expiry":"2023-02-18T11:56:30.616837082-05:00"}

/usr/bin/rclone_local.config

CAM_FOLDER=/data/output/Camera1
REMOTE_FOLDER=/PiCam1

Command to copy to Google Drive: /usr/bin/rclone_tool.sh run copy GoogleDrive

Troubleshoot: /var/log/rclone.log

[frakman1]

Here are several links to adjust settings: Watchdog settings os startup is the location for disabling network services if no network: OS_NETWORKLESS, but this disables any service that requires/uses networking.

I don't see any watchdog.conf file, only watch.conf that seems use LINK_WATCH for something related. I can't follow the logic but I think I have to somehow set ${panic} to false somewhere in here if I want it to not freak out if there's no network connection.

Or maybe I can just set LINK_WATCH="false" in /data/etc/watch.conf instead. Will try it later...