Hangs on vagrant up when following Quick Start instructions

[mathonsunday]

I'm following the Quick Start instructions. When I run vagrant up I hang on the line ==> default: requirements.txt.

[erikrose]

Can you paste your full output? I don't see that line in mine (or in our CI runs, like at https://ci.mozilla.org/job/dxr/339/console).

[mathonsunday]

My full output:

Veronica@veronicas-mbp ~/Documents/dxr[master_]$ vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Clearing any previously set forwarded ports... ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat default: Adapter 2: hostonly ==> default: Forwarding ports... default: 80 => 8000 (adapter 1) default: 22 => 2222 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2222 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Connection timeout. Retrying... ==> default: Machine booted and ready! ==> default: Checking for guest additions in VM... default: The guest additions on this VM do not match the installed version of default: VirtualBox! In most cases this is fine, but in rare cases it can default: prevent things such as shared folders from working properly. If you see default: shared folder errors, please make sure the guest additions within the default: virtual machine match the version of VirtualBox you have installed on default: your host and reload your VM. default: default: Guest Additions Version: 4.2.16 default: VirtualBox Version: 4.3 ==> default: Configuring and enabling network interfaces... ==> default: Mounting shared folders... default: /vagrant => /Users/Veronica/Documents/dxr default: /home/vagrant/dxr => /Users/Veronica/Documents/dxr ==> default: Running provisioner: shell... default: Running: /var/folders/by/v4pmt5c105l0yz63y9_5dk1c0000gn/T/vagrant-shell20140607-78636-1754zrm.sh ==> default: stdin: is not a tty ==> default: + ==> default: apt-get ==> default: update ==> default: Ign http://security.ubuntu.com saucy-security InRelease ==> default: Get:1 http://security.ubuntu.com saucy-security Release.gpg [933 B] ==> default: Get:2 http://security.ubuntu.com saucy-security Release [49.6 kB] ==> default: Get:3 http://security.ubuntu.com saucy-security/main amd64 Packages [128 kB] ==> default: Get:4 http://security.ubuntu.com saucy-security/restricted amd64 Packages [14 B] ==> default: Get:5 http://security.ubuntu.com saucy-security/universe amd64 Packages [42.1 kB] ==> default: Ign http://archive.ubuntu.com saucy InRelease ==> default: Ign http://archive.ubuntu.com saucy-updates InRelease ==> default: Get:6 http://security.ubuntu.com saucy-security/multiverse amd64 Packages [3446 B] ==> default: Get:7 http://archive.ubuntu.com saucy Release.gpg [933 B] ==> default: Get:8 http://archive.ubuntu.com saucy-updates Release.gpg [933 B] ==> default: Get:9 http://security.ubuntu.com saucy-security/main Translation-en [69.9 kB] ==> default: Get:10 http://archive.ubuntu.com saucy Release [49.6 kB] ==> default: Get:11 http://archive.ubuntu.com saucy-updates Release [49.6 kB] ==> default: Get:12 http://archive.ubuntu.com saucy/main amd64 Packages [1239 kB] ==> default: Hit http://security.ubuntu.com saucy-security/multiverse Translation-en ==> default: Hit http://security.ubuntu.com saucy-security/restricted Translation-en ==> default: Get:13 http://security.ubuntu.com saucy-security/universe Translation-en [24.6 kB] ==> default: Get:14 http://archive.ubuntu.com saucy/restricted amd64 Packages [9348 B] ==> default: Get:15 http://archive.ubuntu.com saucy/universe amd64 Packages [5644 kB] ==> default: Get:16 http://archive.ubuntu.com saucy/multiverse amd64 Packages [131 kB] ==> default: Hit http://archive.ubuntu.com saucy/main Translation-en ==> default: Hit http://archive.ubuntu.com saucy/multiverse Translation-en ==> default: Hit http://archive.ubuntu.com saucy/restricted Translation-en ==> default: Get:17 http://archive.ubuntu.com saucy/universe Translation-en [3885 kB] ==> default: Get:18 http://archive.ubuntu.com saucy-updates/main amd64 Packages [244 kB] ==> default: Get:19 http://archive.ubuntu.com saucy-updates/restricted amd64 Packages [14 B] ==> default: Get:20 http://archive.ubuntu.com saucy-updates/universe amd64 Packages [165 kB] ==> default: Get:21 http://archive.ubuntu.com saucy-updates/multiverse amd64 Packages [3739 B] ==> default: Get:22 http://archive.ubuntu.com saucy-updates/main Translation-en [116 kB] ==> default: Hit http://archive.ubuntu.com saucy-updates/multiverse Translation-en ==> default: Hit http://archive.ubuntu.com saucy-updates/restricted Translation-en ==> default: Get:23 http://archive.ubuntu.com saucy-updates/universe Translation-en [82.5 kB] ==> default: Fetched 11.9 MB in 27s (436 kB/s) ==> default: Reading package lists... ==> default: + ==> default: apt-get ==> default: install ==> default: -y ==> default: npm ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: gyp libc-ares-dev libc-ares2 libssl-dev libssl-doc libssl1.0.0 ==> default: libv8-3.14-dev libv8-3.14.5 node-abbrev node-ansi node-archy ==> default: node-block-stream node-fstream node-fstream-ignore node-glob ==> default: node-graceful-fs node-gyp node-inherits node-ini node-lockfile ==> default: node-lru-cache node-minimatch node-mkdirp node-mute-stream node-nopt ==> default: node-npmlog node-once node-osenv node-read node-read-package-json ==> default: node-request node-retry node-rimraf node-semver node-sigmund node-slide ==> default: node-tar node-which nodejs nodejs-dev zlib1g-dev ==> default: The following NEW packages will be installed: ==> default: gyp libc-ares-dev libc-ares2 libssl-dev libssl-doc libv8-3.14-dev ==> default: libv8-3.14.5 node-abbrev node-ansi node-archy node-block-stream node-fstream ==> default: node-fstream-ignore node-glob node-graceful-fs node-gyp node-inherits ==> default: node-ini node-lockfile node-lru-cache node-minimatch node-mkdirp ==> default: node-mute-stream node-nopt node-npmlog node-once node-osenv node-read ==> default: node-read-package-json node-request node-retry node-rimraf node-semver ==> default: node-sigmund node-slide node-tar node-which nodejs nodejs-dev npm zlib1g-dev ==> default: The following packages will be upgraded: ==> default: libssl1.0.0 ==> default: 1 upgraded, 41 newly installed, 0 to remove and 21 not upgraded. ==> default: Need to get 7666 kB of archives. ==> default: After this operation, 21.3 MB of additional disk space will be used. ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libssl1.0.0 amd64 1.0.1e-3ubuntu1.4 [1052 kB] ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ saucy/main libc-ares2 amd64 1.10.0-2 [38.5 kB] ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ saucy/universe gyp all 0.1~svn1654-1 [247 kB] ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ saucy/main zlib1g-dev amd64 1:1.2.8.dfsg-1ubuntu1 [183 kB] ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libssl-dev amd64 1.0.1e-3ubuntu1.4 [1570 kB] ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libssl-doc all 1.0.1e-3ubuntu1.4 [1033 kB] ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ saucy/universe libv8-3.14.5 amd64 3.14.5.8-4 [1560 kB] ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ saucy/universe libv8-3.14-dev amd64 3.14.5.8-4 [66.1 kB] ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ saucy/main libc-ares-dev amd64 1.10.0-2 [109 kB] ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ saucy/universe nodejs amd64 0.10.15~dfsg1-4 [943 kB] ==> default: Get:11 http://archive.ubuntu.com/ubuntu/ saucy/universe node-abbrev all 1.0.4-2 [3814 B] ==> default: Get:12 http://archive.ubuntu.com/ubuntu/ saucy/universe node-ansi all 0.1.2~dfsg1-1 [8906 B] ==> default: Get:13 http://archive.ubuntu.com/ubuntu/ saucy/universe node-archy all 0.0.2-1 [3660 B] ==> default: Get:14 http://archive.ubuntu.com/ubuntu/ saucy/universe node-inherits all 2.0.0-1 [3090 B] ==> default: Get:15 http://archive.ubuntu.com/ubuntu/ saucy/universe node-block-stream all 0.0.6-1 [4718 B] ==> default: Get:16 http://archive.ubuntu.com/ubuntu/ saucy/universe node-rimraf all 2.0.1-1 [3802 B] ==> default: Get:17 http://archive.ubuntu.com/ubuntu/ saucy/universe node-mkdirp all 0.3.3-1 [4168 B] ==> default: Get:18 http://archive.ubuntu.com/ubuntu/ saucy/universe node-graceful-fs all 2.0.0-2 [6718 B] ==> default: Get:19 http://archive.ubuntu.com/ubuntu/ saucy/universe node-fstream all 0.1.22-1 [19.1 kB] ==> default: Get:20 http://archive.ubuntu.com/ubuntu/ saucy/universe node-lru-cache all 2.3.0-1 [5502 B] ==> default: Get:21 http://archive.ubuntu.com/ubuntu/ saucy/universe node-sigmund all 1.0.0-1 [3818 B] ==> default: Get:22 http://archive.ubuntu.com/ubuntu/ saucy/universe node-minimatch all 0.2.11-1 [14.9 kB] ==> default: Get:23 http://archive.ubuntu.com/ubuntu/ saucy/universe node-fstream-ignore all 0.0.6-2 [5586 B] ==> default: Get:24 http://archive.ubuntu.com/ubuntu/ saucy/universe node-glob all 3.2.1-2 [13.6 kB] ==> default: Get:25 http://archive.ubuntu.com/ubuntu/ saucy/universe nodejs-dev amd64 0.10.15~dfsg1-4 [196 kB] ==> default: Get:26 http://archive.ubuntu.com/ubuntu/ saucy/universe node-nopt all 2.1.2-1 [11.8 kB] ==> default: Get:27 http://archive.ubuntu.com/ubuntu/ saucy/universe node-npmlog all 0.0.2-1 [5620 B] ==> default: Get:28 http://archive.ubuntu.com/ubuntu/ saucy/universe node-osenv all 0.0.3-1 [3810 B] ==> default: Get:29 http://archive.ubuntu.com/ubuntu/ saucy/universe node-request all 2.9.153-1 [19.9 kB] ==> default: Get:30 http://archive.ubuntu.com/ubuntu/ saucy/universe node-semver all 2.1.0-2 [16.2 kB] ==> default: Get:31 http://archive.ubuntu.com/ubuntu/ saucy/universe node-tar all 0.1.18-1 [18.3 kB] ==> default: Get:32 http://archive.ubuntu.com/ubuntu/ saucy/universe node-which all 1.0.5-2 [3678 B] ==> default: Get:33 http://archive.ubuntu.com/ubuntu/ saucy/universe node-gyp all 0.10.9-1 [22.2 kB] ==> default: Get:34 http://archive.ubuntu.com/ubuntu/ saucy/universe node-ini all 1.1.0-1 [4770 B] ==> default: Get:35 http://archive.ubuntu.com/ubuntu/ saucy/universe node-lockfile all 0.3.1-1 [5028 B] ==> default: Get:36 http://archive.ubuntu.com/ubuntu/ saucy/universe node-mute-stream all 0.0.3-1 [3738 B] ==> default: Get:37 http://archive.ubuntu.com/ubuntu/ saucy/universe node-once all 1.1.1-1 [2608 B] ==> default: Get:38 http://archive.ubuntu.com/ubuntu/ saucy/universe node-read all 1.0.4-1 [4282 B] ==> default: Get:39 http://archive.ubuntu.com/ubuntu/ saucy/universe node-slide all 1.1.4-1 [6118 B] ==> default: Get:40 http://archive.ubuntu.com/ubuntu/ saucy/universe node-read-package-json all 0.3.1-3 [9628 B] ==> default: Get:41 http://archive.ubuntu.com/ubuntu/ saucy/universe node-retry all 0.6.0-1 [6172 B] ==> default: Get:42 http://archive.ubuntu.com/ubuntu/ saucy/universe npm all 1.2.18~dfsg-3 [423 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 7666 kB in 36s (209 kB/s) ==> default: (Reading database ... ==> default: 65357 files and directories currently installed.) ==> default: Preparing to replace libssl1.0.0:amd64 1.0.1e-3ubuntu1.2 (using .../libssl1.0.0_1.0.1e-3ubuntu1.4_amd64.deb) ... ==> default: Unpacking replacement libssl1.0.0:amd64 ... ==> default: Selecting previously unselected package libc-ares2:amd64. ==> default: Unpacking libc-ares2:amd64 (from .../libc-ares2_1.10.0-2_amd64.deb) ... ==> default: Selecting previously unselected package gyp. ==> default: Unpacking gyp (from .../gyp_0.1~svn1654-1_all.deb) ... ==> default: Selecting previously unselected package zlib1g-dev:amd64. ==> default: Unpacking zlib1g-dev:amd64 (from .../zlib1g-dev_1%3a1.2.8.dfsg-1ubuntu1_amd64.deb) ... ==> default: Selecting previously unselected package libssl-dev:amd64. ==> default: Unpacking libssl-dev:amd64 (from .../libssl-dev_1.0.1e-3ubuntu1.4_amd64.deb) ... ==> default: Selecting previously unselected package libssl-doc. ==> default: Unpacking libssl-doc (from .../libssl-doc_1.0.1e-3ubuntu1.4_all.deb) ... ==> default: Selecting previously unselected package libv8-3.14.5. ==> default: Unpacking libv8-3.14.5 (from .../libv8-3.14.5_3.14.5.8-4_amd64.deb) ... ==> default: Selecting previously unselected package libv8-3.14-dev. ==> default: Unpacking libv8-3.14-dev (from .../libv8-3.14-dev_3.14.5.8-4_amd64.deb) ... ==> default: Selecting previously unselected package libc-ares-dev:amd64. ==> default: Unpacking libc-ares-dev:amd64 (from .../libc-ares-dev_1.10.0-2_amd64.deb) ... ==> default: Selecting previously unselected package nodejs. ==> default: Unpacking nodejs (from .../nodejs_0.10.15~dfsg1-4_amd64.deb) ... ==> default: Selecting previously unselected package node-abbrev. ==> default: Unpacking node-abbrev (from .../node-abbrev_1.0.4-2_all.deb) ... ==> default: Selecting previously unselected package node-ansi. ==> default: Unpacking node-ansi (from .../node-ansi_0.1.2~dfsg1-1_all.deb) ... ==> default: Selecting previously unselected package node-archy. ==> default: Unpacking node-archy (from .../node-archy_0.0.2-1_all.deb) ... ==> default: Selecting previously unselected package node-inherits. ==> default: Unpacking node-inherits (from .../node-inherits_2.0.0-1_all.deb) ... ==> default: Selecting previously unselected package node-block-stream. ==> default: Unpacking node-block-stream (from .../node-block-stream_0.0.6-1_all.deb) ... ==> default: Selecting previously unselected package node-rimraf. ==> default: Unpacking node-rimraf (from .../node-rimraf_2.0.1-1_all.deb) ... ==> default: Selecting previously unselected package node-mkdirp. ==> default: Unpacking node-mkdirp (from .../node-mkdirp_0.3.3-1_all.deb) ... ==> default: Selecting previously unselected package node-graceful-fs. ==> default: Unpacking node-graceful-fs (from .../node-graceful-fs_2.0.0-2_all.deb) ... ==> default: Selecting previously unselected package node-fstream. ==> default: Unpacking node-fstream (from .../node-fstream_0.1.22-1_all.deb) ... ==> default: Selecting previously unselected package node-lru-cache. ==> default: Unpacking node-lru-cache (from .../node-lru-cache_2.3.0-1_all.deb) ... ==> default: Selecting previously unselected package node-sigmund. ==> default: Unpacking node-sigmund (from .../node-sigmund_1.0.0-1_all.deb) ... ==> default: Selecting previously unselected package node-minimatch. ==> default: Unpacking node-minimatch (from .../node-minimatch_0.2.11-1_all.deb) ... ==> default: Selecting previously unselected package node-fstream-ignore. ==> default: Unpacking node-fstream-ignore (from .../node-fstream-ignore_0.0.6-2_all.deb) ... ==> default: Selecting previously unselected package node-glob. ==> default: Unpacking node-glob (from .../node-glob_3.2.1-2_all.deb) ... ==> default: Selecting previously unselected package nodejs-dev. ==> default: Unpacking nodejs-dev (from .../nodejs-dev_0.10.15~dfsg1-4_amd64.deb) ... ==> default: Selecting previously unselected package node-nopt. ==> default: Unpacking node-nopt (from .../node-nopt_2.1.2-1_all.deb) ... ==> default: Selecting previously unselected package node-npmlog. ==> default: Unpacking node-npmlog (from .../node-npmlog_0.0.2-1_all.deb) ... ==> default: Selecting previously unselected package node-osenv. ==> default: Unpacking node-osenv (from .../node-osenv_0.0.3-1_all.deb) ... ==> default: Selecting previously unselected package node-request. ==> default: Unpacking node-request (from .../node-request_2.9.153-1_all.deb) ... ==> default: Selecting previously unselected package node-semver. ==> default: Unpacking node-semver (from .../node-semver_2.1.0-2_all.deb) ... ==> default: Selecting previously unselected package node-tar. ==> default: Unpacking node-tar (from .../node-tar_0.1.18-1_all.deb) ... ==> default: Selecting previously unselected package node-which. ==> default: Unpacking node-which (from .../node-which_1.0.5-2_all.deb) ... ==> default: Selecting previously unselected package node-gyp. ==> default: Unpacking node-gyp (from .../node-gyp_0.10.9-1_all.deb) ... ==> default: Selecting previously unselected package node-ini. ==> default: Unpacking node-ini (from .../node-ini_1.1.0-1_all.deb) ... ==> default: Selecting previously unselected package node-lockfile. ==> default: Unpacking node-lockfile (from .../node-lockfile_0.3.1-1_all.deb) ... ==> default: Selecting previously unselected package node-mute-stream. ==> default: Unpacking node-mute-stream (from .../node-mute-stream_0.0.3-1_all.deb) ... ==> default: Selecting previously unselected package node-once. ==> default: Unpacking node-once (from .../node-once_1.1.1-1_all.deb) ... ==> default: Selecting previously unselected package node-read. ==> default: Unpacking node-read (from .../node-read_1.0.4-1_all.deb) ... ==> default: Selecting previously unselected package node-slide. ==> default: Unpacking node-slide (from .../node-slide_1.1.4-1_all.deb) ... ==> default: Selecting previously unselected package node-read-package-json. ==> default: Unpacking node-read-package-json (from .../node-read-package-json_0.3.1-3_all.deb) ... ==> default: Selecting previously unselected package node-retry. ==> default: Unpacking node-retry (from .../node-retry_0.6.0-1_all.deb) ... ==> default: Selecting previously unselected package npm. ==> default: Unpacking npm (from .../npm_1.2.18~dfsg-3_all.deb) ... ==> default: Processing triggers for man-db ... ==> default: Setting up libssl1.0.0:amd64 (1.0.1e-3ubuntu1.4) ... ==> default: Setting up libc-ares2:amd64 (1.10.0-2) ... ==> default: Setting up gyp (0.1~svn1654-1) ... ==> default: Setting up zlib1g-dev:amd64 (1:1.2.8.dfsg-1ubuntu1) ... ==> default: Setting up libssl-dev:amd64 (1.0.1e-3ubuntu1.4) ... ==> default: Setting up libssl-doc (1.0.1e-3ubuntu1.4) ... ==> default: Setting up libv8-3.14.5 (3.14.5.8-4) ... ==> default: Setting up libv8-3.14-dev (3.14.5.8-4) ... ==> default: Setting up libc-ares-dev:amd64 (1.10.0-2) ... ==> default: Setting up nodejs (0.10.15~dfsg1-4) ... ==> default: update-alternatives: ==> default: using /usr/bin/nodejs to provide /usr/bin/js (js) in auto mode ==> default: Setting up node-abbrev (1.0.4-2) ... ==> default: Setting up node-ansi (0.1.2~dfsg1-1) ... ==> default: Setting up node-archy (0.0.2-1) ... ==> default: Setting up node-inherits (2.0.0-1) ... ==> default: Setting up node-block-stream (0.0.6-1) ... ==> default: Setting up node-rimraf (2.0.1-1) ... ==> default: Setting up node-mkdirp (0.3.3-1) ... ==> default: Setting up node-graceful-fs (2.0.0-2) ... ==> default: Setting up node-fstream (0.1.22-1) ... ==> default: Setting up node-lru-cache (2.3.0-1) ... ==> default: Setting up node-sigmund (1.0.0-1) ... ==> default: Setting up node-minimatch (0.2.11-1) ... ==> default: Setting up node-fstream-ignore (0.0.6-2) ... ==> default: Setting up node-glob (3.2.1-2) ... ==> default: Setting up nodejs-dev (0.10.15~dfsg1-4) ... ==> default: Setting up node-nopt (2.1.2-1) ... ==> default: Setting up node-npmlog (0.0.2-1) ... ==> default: Setting up node-osenv (0.0.3-1) ... ==> default: Setting up node-request (2.9.153-1) ... ==> default: Setting up node-semver (2.1.0-2) ... ==> default: Setting up node-tar (0.1.18-1) ... ==> default: Setting up node-which (1.0.5-2) ... ==> default: Setting up node-gyp (0.10.9-1) ... ==> default: Setting up node-ini (1.1.0-1) ... ==> default: Setting up node-lockfile (0.3.1-1) ... ==> default: Setting up node-mute-stream (0.0.3-1) ... ==> default: Setting up node-once (1.1.1-1) ... ==> default: Setting up node-read (1.0.4-1) ... ==> default: Setting up node-slide (1.1.4-1) ... ==> default: Setting up node-read-package-json (0.3.1-3) ... ==> default: Setting up node-retry (0.6.0-1) ... ==> default: Setting up npm (1.2.18~dfsg-3) ... ==> default: Processing triggers for libc-bin ... ==> default: + ==> default: ln ==> default: -sf ==> default: /usr/bin/nodejs ==> default: /usr/local/bin/node ==> default: + ==> default: apt-get ==> default: install ==> default: -y ==> default: sphinx-common ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: docutils-common docutils-doc libjbig0 libjpeg-turbo8 libjpeg8 ==> default: libjs-sphinxdoc libjs-underscore liblcms1 libpaper-utils libpaper1 libtiff5 ==> default: python-docutils python-imaging python-imaging-compat python-jinja2 ==> default: python-markupsafe python-pygments python-roman python-sphinx sphinx-doc ==> default: Suggested packages: ==> default: javascript-common liblcms-utils texlive-latex-recommended texlive-latex-base ==> default: texlive-lang-french fonts-linuxlibertine ttf-linux-libertine ==> default: python-imaging-doc python-imaging-dbg python-jinja2-doc ttf-bitstream-vera ==> default: jsmath libjs-mathjax dvipng texlive-latex-extra texlive-fonts-recommended ==> default: The following NEW packages will be installed: ==> default: docutils-common docutils-doc libjbig0 libjpeg-turbo8 libjpeg8 ==> default: libjs-sphinxdoc libjs-underscore liblcms1 libpaper-utils libpaper1 libtiff5 ==> default: python-docutils python-imaging python-imaging-compat python-jinja2 ==> default: python-markupsafe python-pygments python-roman python-sphinx sphinx-common ==> default: sphinx-doc ==> default: 0 upgraded, 21 newly installed, 0 to remove and 21 not upgraded. ==> default: Need to get 5126 kB of archives. ==> default: After this operation, 18.7 MB of additional disk space will be used. ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libjpeg-turbo8 amd64 1.3.0-0ubuntu1.1 [124 kB] ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ saucy/main liblcms1 amd64 1.19.dfsg-1.2ubuntu3 [107 kB] ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ saucy/main libpaper1 amd64 1.1.24+nmu2ubuntu2 [14.6 kB] ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libjbig0 amd64 2.0-2ubuntu1.13.10.1 [29.0 kB] ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ saucy/main libjpeg8 amd64 8c-2ubuntu8 [2194 B] ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libtiff5 amd64 4.0.2-4ubuntu3.1 [168 kB] ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ saucy/main docutils-common all 0.11-2 [166 kB] ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ saucy/main docutils-doc all 0.11-2 [1326 kB] ==> default: Get:9 http://archive.ubuntu.com/ubuntu/ saucy/main libjs-underscore all 1.4.4-2ubuntu1 [45.6 kB] ==> default: Get:10 http://archive.ubuntu.com/ubuntu/ saucy/main libjs-sphinxdoc all 1.1.3+dfsg-7ubuntu2 [45.9 kB] ==> default: Get:11 http://archive.ubuntu.com/ubuntu/ saucy/main libpaper-utils amd64 1.1.24+nmu2ubuntu2 [9164 B] ==> default: Get:12 http://archive.ubuntu.com/ubuntu/ saucy/main python-roman all 1.4.0-2ubuntu1 [7590 B] ==> default: Get:13 http://archive.ubuntu.com/ubuntu/ saucy/main python-docutils all 0.11-2 [425 kB] ==> default: Get:14 http://archive.ubuntu.com/ubuntu/ saucy-updates/main python-imaging-compat all 1.1.7+2.0.0-1ubuntu1.1 [5410 B] ==> default: Get:15 http://archive.ubuntu.com/ubuntu/ saucy-updates/main python-imaging amd64 1.1.7+2.0.0-1ubuntu1.1 [347 kB] ==> default: Get:16 http://archive.ubuntu.com/ubuntu/ saucy/main python-markupsafe amd64 0.15-1build3 [13.8 kB] ==> default: Get:17 http://archive.ubuntu.com/ubuntu/ saucy/main python-jinja2 all 2.7-3 [162 kB] ==> default: Get:18 http://archive.ubuntu.com/ubuntu/ saucy/main python-pygments all 1.6+dfsg-1 [529 kB] ==> default: Get:19 http://archive.ubuntu.com/ubuntu/ saucy/main sphinx-common all 1.1.3+dfsg-7ubuntu2 [420 kB] ==> default: Get:20 http://archive.ubuntu.com/ubuntu/ saucy/main python-sphinx all 1.1.3+dfsg-7ubuntu2 [317 kB] ==> default: Get:21 http://archive.ubuntu.com/ubuntu/ saucy/main sphinx-doc all 1.1.3+dfsg-7ubuntu2 [861 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 5126 kB in 18s (276 kB/s) ==> default: Selecting previously unselected package libjpeg-turbo8:amd64. ==> default: (Reading database ... ==> default: 68036 files and directories currently installed.) ==> default: Unpacking libjpeg-turbo8:amd64 (from .../libjpeg-turbo8_1.3.0-0ubuntu1.1_amd64.deb) ... ==> default: Selecting previously unselected package liblcms1:amd64. ==> default: Unpacking liblcms1:amd64 (from .../liblcms1_1.19.dfsg-1.2ubuntu3_amd64.deb) ... ==> default: Selecting previously unselected package libpaper1:amd64. ==> default: Unpacking libpaper1:amd64 (from .../libpaper1_1.1.24+nmu2ubuntu2_amd64.deb) ... ==> default: Selecting previously unselected package libjbig0:amd64. ==> default: Unpacking libjbig0:amd64 (from .../libjbig0_2.0-2ubuntu1.13.10.1_amd64.deb) ... ==> default: Selecting previously unselected package libjpeg8:amd64. ==> default: Unpacking libjpeg8:amd64 (from .../libjpeg8_8c-2ubuntu8_amd64.deb) ... ==> default: Selecting previously unselected package libtiff5:amd64. ==> default: Unpacking libtiff5:amd64 (from .../libtiff5_4.0.2-4ubuntu3.1_amd64.deb) ... ==> default: Selecting previously unselected package docutils-common. ==> default: Unpacking docutils-common (from .../docutils-common_0.11-2_all.deb) ... ==> default: Selecting previously unselected package docutils-doc. ==> default: Unpacking docutils-doc (from .../docutils-doc_0.11-2_all.deb) ... ==> default: Selecting previously unselected package libjs-underscore. ==> default: Unpacking libjs-underscore (from .../libjs-underscore_1.4.4-2ubuntu1_all.deb) ... ==> default: Selecting previously unselected package libjs-sphinxdoc. ==> default: Unpacking libjs-sphinxdoc (from .../libjs-sphinxdoc_1.1.3+dfsg-7ubuntu2_all.deb) ... ==> default: Selecting previously unselected package libpaper-utils. ==> default: Unpacking libpaper-utils (from .../libpaper-utils_1.1.24+nmu2ubuntu2_amd64.deb) ... ==> default: Selecting previously unselected package python-roman. ==> default: Unpacking python-roman (from .../python-roman_1.4.0-2ubuntu1_all.deb) ... ==> default: Selecting previously unselected package python-docutils. ==> default: Unpacking python-docutils (from .../python-docutils_0.11-2_all.deb) ... ==> default: Selecting previously unselected package python-imaging-compat. ==> default: Unpacking python-imaging-compat (from .../python-imaging-compat_1.1.7+2.0.0-1ubuntu1.1_all.deb) ... ==> default: Selecting previously unselected package python-imaging. ==> default: Unpacking python-imaging (from .../python-imaging_1.1.7+2.0.0-1ubuntu1.1_amd64.deb) ... ==> default: Selecting previously unselected package python-markupsafe. ==> default: Unpacking python-markupsafe (from .../python-markupsafe_0.15-1build3_amd64.deb) ... ==> default: Selecting previously unselected package python-jinja2. ==> default: Unpacking python-jinja2 (from .../python-jinja2_2.7-3_all.deb) ... ==> default: Selecting previously unselected package python-pygments. ==> default: Unpacking python-pygments (from .../python-pygments_1.6+dfsg-1_all.deb) ... ==> default: Selecting previously unselected package sphinx-common. ==> default: Unpacking sphinx-common (from .../sphinx-common_1.1.3+dfsg-7ubuntu2_all.deb) ... ==> default: Selecting previously unselected package python-sphinx. ==> default: Unpacking python-sphinx (from .../python-sphinx_1.1.3+dfsg-7ubuntu2_all.deb) ... ==> default: Selecting previously unselected package sphinx-doc. ==> default: Unpacking sphinx-doc (from .../sphinx-doc_1.1.3+dfsg-7ubuntu2_all.deb) ... ==> default: Processing triggers for man-db ... ==> default: Processing triggers for sgml-base ... ==> default: Processing triggers for shared-mime-info ... ==> default: Setting up libjpeg-turbo8:amd64 (1.3.0-0ubuntu1.1) ... ==> default: Setting up liblcms1:amd64 (1.19.dfsg-1.2ubuntu3) ... ==> default: Setting up libpaper1:amd64 (1.1.24+nmu2ubuntu2) ... ==> default: Creating config file /etc/papersize with new version ==> default: Setting up libjbig0:amd64 (2.0-2ubuntu1.13.10.1) ... ==> default: Setting up libjpeg8:amd64 (8c-2ubuntu8) ... ==> default: Setting up libtiff5:amd64 (4.0.2-4ubuntu3.1) ... ==> default: Setting up docutils-common (0.11-2) ... ==> default: Setting up docutils-doc (0.11-2) ... ==> default: Setting up libjs-underscore (1.4.4-2ubuntu1) ... ==> default: Setting up libjs-sphinxdoc (1.1.3+dfsg-7ubuntu2) ... ==> default: Setting up libpaper-utils (1.1.24+nmu2ubuntu2) ... ==> default: Setting up python-roman (1.4.0-2ubuntu1) ... ==> default: Setting up python-markupsafe (0.15-1build3) ... ==> default: Setting up python-jinja2 (2.7-3) ... ==> default: Setting up python-pygments (1.6+dfsg-1) ... ==> default: Setting up sphinx-common (1.1.3+dfsg-7ubuntu2) ... ==> default: Setting up sphinx-doc (1.1.3+dfsg-7ubuntu2) ... ==> default: Processing triggers for sgml-base ... ==> default: Setting up python-docutils (0.11-2) ... ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode ==> default: update-alternatives: ==> default: using /usr/share/docutils/scripts/python2/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode ==> default: Setting up python-sphinx (1.1.3+dfsg-7ubuntu2) ... ==> default: Setting up python-imaging-compat (1.1.7+2.0.0-1ubuntu1.1) ... ==> default: Setting up python-imaging (1.1.7+2.0.0-1ubuntu1.1) ... ==> default: Processing triggers for libc-bin ... ==> default: + ==> default: apt-get ==> default: install ==> default: -y ==> default: libapache2-mod-wsgi ==> default: python-pip ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: apache2-bin libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap ==> default: python-setuptools ==> default: Suggested packages: ==> default: apache2-doc apache2-suexec-pristine apache2-suexec-custom ==> default: Recommended packages: ==> default: python-dev-all ==> default: The following NEW packages will be installed: ==> default: apache2-bin libapache2-mod-wsgi libapr1 libaprutil1 libaprutil1-dbd-sqlite3 ==> default: libaprutil1-ldap python-pip python-setuptools ==> default: 0 upgraded, 8 newly installed, 0 to remove and 21 not upgraded. ==> default: Need to get 1898 kB of archives. ==> default: After this operation, 6909 kB of additional disk space will be used. ==> default: Get:1 http://archive.ubuntu.com/ubuntu/ saucy/main libapr1 amd64 1.4.8-1ubuntu1 [94.1 kB] ==> default: Get:2 http://archive.ubuntu.com/ubuntu/ saucy/main libaprutil1 amd64 1.5.2-1 [92.0 kB] ==> default: Get:3 http://archive.ubuntu.com/ubuntu/ saucy/main libaprutil1-dbd-sqlite3 amd64 1.5.2-1 [12.0 kB] ==> default: Get:4 http://archive.ubuntu.com/ubuntu/ saucy/main libaprutil1-ldap amd64 1.5.2-1 [9556 B] ==> default: Get:5 http://archive.ubuntu.com/ubuntu/ saucy-updates/main apache2-bin amd64 2.4.6-2ubuntu2.2 [842 kB] ==> default: Get:6 http://archive.ubuntu.com/ubuntu/ saucy-updates/main libapache2-mod-wsgi amd64 3.4-4ubuntu2.1.13.10.1 [80.4 kB] ==> default: Get:7 http://archive.ubuntu.com/ubuntu/ saucy/main python-setuptools all 0.6.37-1ubuntu1 [455 kB] ==> default: Get:8 http://archive.ubuntu.com/ubuntu/ saucy/universe python-pip all 1.4.1-2 [313 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 1898 kB in 14s (132 kB/s) ==> default: Selecting previously unselected package libapr1. ==> default: (Reading database ... ==> default: 69933 files and directories currently installed.) ==> default: Unpacking libapr1 (from .../libapr1_1.4.8-1ubuntu1_amd64.deb) ... ==> default: Selecting previously unselected package libaprutil1. ==> default: Unpacking libaprutil1 (from .../libaprutil1_1.5.2-1_amd64.deb) ... ==> default: Selecting previously unselected package libaprutil1-dbd-sqlite3. ==> default: Unpacking libaprutil1-dbd-sqlite3 (from .../libaprutil1-dbd-sqlite3_1.5.2-1_amd64.deb) ... ==> default: Selecting previously unselected package libaprutil1-ldap. ==> default: Unpacking libaprutil1-ldap (from .../libaprutil1-ldap_1.5.2-1_amd64.deb) ... ==> default: Selecting previously unselected package apache2-bin. ==> default: Unpacking apache2-bin (from .../apache2-bin_2.4.6-2ubuntu2.2_amd64.deb) ... ==> default: Selecting previously unselected package libapache2-mod-wsgi. ==> default: Unpacking libapache2-mod-wsgi (from .../libapache2-mod-wsgi_3.4-4ubuntu2.1.13.10.1_amd64.deb) ... ==> default: Selecting previously unselected package python-setuptools. ==> default: Unpacking python-setuptools (from .../python-setuptools_0.6.37-1ubuntu1_all.deb) ... ==> default: Selecting previously unselected package python-pip. ==> default: Unpacking python-pip (from .../python-pip_1.4.1-2_all.deb) ... ==> default: Processing triggers for man-db ... ==> default: Setting up libapr1 (1.4.8-1ubuntu1) ... ==> default: Setting up libaprutil1 (1.5.2-1) ... ==> default: Setting up libaprutil1-dbd-sqlite3 (1.5.2-1) ... ==> default: Setting up libaprutil1-ldap (1.5.2-1) ... ==> default: Setting up apache2-bin (2.4.6-2ubuntu2.2) ... ==> default: Setting up libapache2-mod-wsgi (3.4-4ubuntu2.1.13.10.1) ... ==> default: Setting up python-setuptools (0.6.37-1ubuntu1) ... ==> default: Setting up python-pip (1.4.1-2) ... ==> default: Processing triggers for libc-bin ... ==> default: + ==> default: pip ==> default: install ==> default: virtualenv ==> default: virtualenvwrapper ==> default: python-hglib ==> default: nose ==> default: Downloading/unpacking virtualenv ==> default: Running setup.py egginfo for package virtualenv ==> default: ==> default: warning: no previously-included files matching '' found under directory 'docs/templates' ==> default: warning: no previously-included files matching '' found under directory 'docs/_build' ==> default: Downloading/unpacking virtualenvwrapper ==> default: Running setup.py egg_info for package virtualenvwrapper ==> default: ==> default: Installed /tmp/pip_buildroot/virtualenvwrapper/pbr-0.8.2-py2.7.egg ==> default: [pbr] Processing SOURCES.txt ==> default: warning: LocalManifestMaker: standard file '-c' not found ==> default: ==> default: warning: no previously-included files found matching '.gitignore' ==> default: warning: no previously-included files found matching '.gitreview' ==> default: warning: no previously-included files matching '.pyc' found anywhere in distribution ==> default: warning: no files found matching '.html' under directory 'docs' ==> default: warning: no files found matching '.css' under directory 'docs' ==> default: warning: no files found matching '.js' under directory 'docs' ==> default: warning: no files found matching '.png' under directory 'docs' ==> default: Downloading/unpacking python-hglib ==> default: Downloading python-hglib-1.2.tar.gz ==> default: Running setup.py egg_info for package python-hglib ==> default: ==> default: Downloading/unpacking nose ==> default: Running setup.py egg_info for package nose ==> default: ==> default: no previously-included directories found matching 'doc/.build' ==> default: Downloading/unpacking virtualenv-clone (from virtualenvwrapper) ==> default: Downloading virtualenv-clone-0.2.5.tar.gz ==> default: Running setup.py egg_info for package virtualenv-clone ==> default: ==> default: Downloading/unpacking stevedore (from virtualenvwrapper) ==> default: Running setup.py egg_info for package stevedore ==> default: ==> default: Installed /tmp/pip_buildroot/stevedore/pbr-0.8.2-py2.7.egg ==> default: [pbr] Excluding argparse: Python 2.6 only dependency ==> default: [pbr] Processing SOURCES.txt ==> default: warning: LocalManifestMaker: standard file '-c' not found ==> default: ==> default: warning: no previously-included files found matching '.gitignore' ==> default: warning: no previously-included files found matching '.gitreview' ==> default: warning: no previously-included files matching '.pyc' found anywhere in distribution ==> default: warning: no files found matching '.html' under directory 'docs' ==> default: warning: no files found matching '.css' under directory 'docs' ==> default: warning: no files found matching '.js' under directory 'docs' ==> default: warning: no files found matching '.png' under directory 'docs' ==> default: warning: no files found matching '.py' under directory 'tests' ==> default: Installing collected packages: virtualenv, virtualenvwrapper, python-hglib, nose, virtualenv-clone, stevedore ==> default: Running setup.py install for virtualenv ==> default: ==> default: warning: no previously-included files matching '' found under directory 'docs/templates' ==> default: warning: no previously-included files matching '' found under directory 'docs/_build' ==> default: Installing virtualenv script to /usr/local/bin ==> default: Installing virtualenv-2.7 script to /usr/local/bin ==> default: Running setup.py install for virtualenvwrapper ==> default: [pbr] Reusing existing SOURCES.txt ==> default: changing mode of build/scripts-2.7/virtualenvwrapper.sh from 644 to 755 ==> default: changing mode of build/scripts-2.7/virtualenvwrapper_lazy.sh from 644 to 755 ==> default: Skipping installation of /usr/local/lib/python2.7/dist-packages/virtualenvwrapper/init.py (namespace package) ==> default: Installing /usr/local/lib/python2.7/dist-packages/virtualenvwrapper-4.3-nspkg.pth ==> default: changing mode of /usr/local/bin/virtualenvwrapper.sh to 755 ==> default: changing mode of /usr/local/bin/virtualenvwrapper_lazy.sh to 755 ==> default: Running setup.py install for python-hglib ==> default: ==> default: Running setup.py install for nose ==> default: ==> default: no previously-included directories found matching 'doc/.build' ==> default: Installing nosetests script to /usr/local/bin ==> default: Installing nosetests-2.7 script to /usr/local/bin ==> default: Running setup.py install for virtualenv-clone ==> default: ==> default: Installing virtualenv-clone script to /usr/local/bin ==> default: Running setup.py install for stevedore ==> default: [pbr] Reusing existing SOURCES.txt ==> default: Successfully installed virtualenv virtualenvwrapper python-hglib nose virtualenv-clone stevedore ==> default: Cleaning up... ==> default: + ==> default: cd ==> default: /home/vagrant/dxr ==> default: + ==> default: ./peep.py ==> default: install ==> default: -r ==> default: requirements.txt

[erikrose]

First, I find it interesting that your output is so broken up by line. If you look at some of our CI runs (search for "requirements.txt"), you'll see they aren't: https://ci.mozilla.org/job/dxr/340/console.

That aside, I'd bet a cheeseburger that it has something to do with VirtualBox shared folders. That's usually the culprit. The solution is generally to upgrade your Guest Additions; I see yours are a point release behind. There are (fairly) easy instructions in the comments of vagrant_provision.sh that don't require a bunch of mouse clicking.

We've also run into a few hundredths-place releases of VirtualBox that are just plain buggy. A bugzilla search might turn those up; I don't have them on me atm.

Let me know if things improve after revving the Additions!

[mathonsunday]

I got this message when I clicked on "Insert Guest Additions CD Image":

[erikrose]

Can you try the alternate, command-line instructions from vagrant_provision.sh, the ones starting with "Alternately"?

[erikrose]

Did you ever have any luck?

[Osmose]

I ran into the same issue, but when I tried inserting the guest additions CD image, I got a message that the machine doesn't have a CD drive at all. I tried the command-line instructions as suggested, and it seems to have worked, but based on the output I got from running the apt-get command I'm not convinced it wasn't just fixed by turning the machine off and on:

_____________________________________________________________________
WARNING! Your environment specifies an invalid locale.
 This can affect your user experience significantly, including the
 ability to manage packages. You may install the locales by running:

   sudo apt-get install language-pack-en
     or
   sudo locale-gen en_US.UTF-8

To see all available language packs, run:
   apt-cache search "^language-pack-[a-z][a-z]$"
To disable this message for all users, run:
   sudo touch /var/lib/cloud/instance/locale-check.skip
_____________________________________________________________________

Reading package lists...
Building dependency tree...
Reading state information...
Package 'virtualbox-guest-dkms' is not installed, so not removed
Package 'virtualbox-guest-utils' is not installed, so not removed
Package 'virtualbox-guest-x11' is not installed, so not removed
The following packages were automatically installed and are no longer required:
  libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libfontenc1 libgl1-mesa-dri libglapi-mesa libice6 libllvm3.3 libpciaccess0 libpixman-1-0 libsm6 libtxc-dxtn-s2tc0 libxaw7 libxcomposite1 libxdamage1 libxfixes3 libxfont1 libxkbfile1 libxmu6 libxpm4 libxrandr2 libxrender1 libxt6 x11-common x11-xkb-utils xfonts-base xfonts-encodings xfonts-utils xserver-common
  xserver-xorg-core
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded.
Connection to 127.0.0.1 closed.