Work-In-Progress
The Alveo U25 combines a SFC9250 X2 GbE Controller with an XCU25==XCZU19EG-FFVC1760 FPGA. It has an x16 PCIe interface that is bifurcated to two x8 interfaces, one for the X2 Ethernet Controller and the other for the FPGA.
Alveo U25 FPGA Setup and Usage Notes
These notes were moved from github.com/mwrnd/notes/Alveo_U25.
Currently focused on trying to debug an Alveo U25 board that came without any X2 firmware. I have been unable to find a complete copy of the U25's X2 firmware.
I use a PCIe x16-to-x8 Debifurcator to allow the board to work in systems that do not support PCIe Bifurcation.
Add Jumper to Mode1 Pin to Allow JTAG Booting
TODO - Is this necessary? Why can't the Zynq be reset into JTAG Boot using JTAG commands?
mwr 0xff5e0200 0x0100
rst -systemThe Mode1 Pin (AC28) is connected via a 0-ohm resistor to 1.8V to set QSPI as the Boot Mode.
Prepare a 4-Pin 2-mm header by bending two pins on one end to right-angles. Also, prepare a single conductor of 0.050" 7-strand ribbon cable by exposing the strands and trimming all but one. The idea is to have a very delicate connection to the Mode1 pad so that if it gets pulled out it will not damage the PCB traces.
This is a very delicate modification but I managed to replace the 0201-size 0-ohm resistor with a 0402-size 10k-ohm resistor and then solder the single conductor of 0.050" 7-strand ribbon cable wire to the Mode1 side of the resistor.
I used the J15 (NO_FLASH) jumper footprint to mount the 4-pin 2mm header. One of the J15 pads has a 10k-ohm resistor to GND. I soldered one of the header legs to the GND pad of the resistor. The other leg I soldered the Mode1 wire.
I can now short the Mode1 pin to GND using a 2mm jumper to boot the U25 in JTAG Mode which allows programming the QSPI Flash memory.
Without the jumper, QSPI boot is active.
Set Up CentOS System
Install all software packages you will need. This is from a listing of all installed packages on the system I am using for testing.
yum install abattis-cantarell-fonts abrt abrt-addon-ccpp \
abrt-addon-kerneloops abrt-addon-pstoreoops abrt-addon-python \
abrt-addon-vmcore abrt-addon-xorg abrt-cli abrt-console-notification \
abrt-dbus abrt-desktop abrt-gui abrt-gui-libs abrt-libs abrt-python \
abrt-retrace-client abrt-tui accountsservice accountsservice-libs acl \
adcli adobe-mappings-cmap adobe-mappings-cmap-deprecated \
adobe-mappings-pdf adwaita-cursor-theme adwaita-gtk2-theme \
adwaita-icon-theme aic94xx-firmware alsa-firmware alsa-lib \
alsa-plugins-pulseaudio alsa-tools-firmware alsa-utils anaconda \
anaconda-core anaconda-gui anaconda-tui anaconda-widgets appstream-data \
apr apr-util armadillo-devel at atk atkmm at-spi2-atk at-spi2-core attica \
attr audit audit-libs audit-libs-python augeas-libs authconfig autoconf \
autocorr-en autofs autogen-libopts automake avahi avahi-glib avahi-gobject \
avahi-libs avahi-ui-gtk3 avr-gcc-c++ avr-libc baobab basesystem bash \
bash-completion bc bind-export-libs bind-libs bind-libs-lite bind-license \
bind-utils binutils biosdevname bison bison-devel bison-runtime bleachbit \
blktrace bluez bluez-libs bolt boost boost169-atomic boost169-build \
boost169-chrono boost169-container boost169-context boost169-contract \
boost169-coroutine boost169-date-time boost169-devel boost169-doc \
boost169-doctools boost169-examples boost169-fiber boost169-filesystem \
boost169-graph boost169-graph-mpich boost169-graph-openmpi \
boost169-iostreams boost169-jam boost169-locale boost169-log boost169-math \
boost169-mpich boost169-mpich-devel boost169-mpich-python2 \
boost169-mpich-python2-devel boost169-mpich-python3 \
boost169-mpich-python3-devel boost169-numpy2 boost169-numpy3 \
boost169-openmpi boost169-openmpi-devel boost169-openmpi-python2 \
boost169-openmpi-python2-devel boost169-openmpi-python3 \
boost169-openmpi-python3-devel boost169-program-options boost169-python2 \
boost169-python2-devel boost169-python3 boost169-python3-devel \
boost169-random boost169-regex boost169-serialization boost169-stacktrace \
boost169-static boost169-system boost169-test boost169-thread \
boost169-timer boost169-type_erasure boost169-wave boost-date-time \
boost-devel boost-filesystem boost-iostreams boost-program-options \
boost-python boost-python36-devel boost-python36-static boost-random \
boost-signals boost-system boost-thread brasero brasero-libs \
brasero-nautilus bridge-utils brlapi brltty btrfs-progs byacc bzip2 \
bzip2-devel bzip2-libs ca-certificates cairo cairo-devel cairo-gobject \
cairomm c-ares cdbs cdparanoia cdparanoia-libs cdrdao celt051 \
centos-indexhtml centos-logos centos-release certmonger cgdcbxd checkpolicy \
cheese cheese-libs chkconfig chrony chrpath cifs-utils cjkuni-uming-fonts \
clang clang-devel clinfo clucene-contribs-lib clucene-core clutter \
clutter-gst2 clutter-gst3 clutter-gtk cmake cogl colord colord-gtk \
colordiff colord-libs color-filesystem compat-cheese314 compat-db47 \
compat-db-headers compat-exiv2-026 compat-glibc compat-glibc-headers \
compat-gnome-desktop314 compat-libcap1 compat-libcogl12 \
compat-libcogl-pango12 compat-libcolord1 compat-libf2c-34 \
compat-libgfortran-41 compat-libtiff3 compat-openldap conda control-center \
control-center-filesystem copy-jdk-configs coreutils cpio cpp cppcheck \
cppcheck-gui cppcheck-htmlreport cracklib cracklib-dicts crash crda \
createrepo cronie cronie-anacron crontabs cross-gcc-common cryptopp \
cryptopp-devel cryptopp-progs crypto-utils cryptsetup cryptsetup-libs \
cryptsetup-python cscope csmock-plugin-cppcheck ctags CUnit cups \
cups-client cups-filesystem cups-filters cups-filters-libs cups-libs \
cups-pk-helper curl cyrus-sasl cyrus-sasl-gssapi cyrus-sasl-lib \
cyrus-sasl-md5 cyrus-sasl-plain cyrus-sasl-scram daxctl-libs dbus \
dbus-glib dbus-libs dbusmenu-qt dbus-python dbus-x11 dconf debconf \
debhelper debootstrap dejavu-fonts-common dejavu-sans-fonts \
dejavu-sans-mono-fonts dejavu-serif-fonts deltarpm desktop-file-utils \
device-mapper device-mapper-event device-mapper-event-libs \
device-mapper-libs device-mapper-multipath device-mapper-multipath-libs \
device-mapper-persistent-data devmem2 dh-autoreconf dhclient dhcp-common \
dhcp-libs diffstat diffutils dkms dleyna-connector-dbus dleyna-core \
dleyna-server dmidecode dmraid dmraid-events dnsmasq docbook-dtds \
docbook-style-xsl dos2unix dosfstools dotconf doxygen dpdk dpdk-devel \
dpkg dpkg-dev dpkg-perl dracut dracut-config-rescue dracut-network dtc \
dvd+rw-tools dwz dyninst e2fsprogs e2fsprogs-libs ebtables ed efibootmgr \
efivar-libs ekiga elfutils elfutils-default-yama-scope elfutils-devel \
elfutils-libelf elfutils-libelf-devel elfutils-libelf-devel-static \
elfutils-libs emacs-filesystem empathy enchant enscript eog epel-release \
espeak ethtool evince evince-libs evince-nautilus evolution \
evolution-data-server evolution-data-server-langpacks evolution-ews \
evolution-ews-langpacks evolution-help evolution-langpacks evolution-mapi \
evolution-mapi-langpacks exempi exiv2 exiv2-libs expat expat-devel \
expat-static farstream farstream02 fastestmirror, fcoe-utils festival \
festival-freebsoft-utils festival-lib festival-speechtools-libs \
festvox-slt-arctic-hts fftw-libs-double file file-libs file-roller \
file-roller-nautilus filesystem findutils fio fipscheck fipscheck-lib \
firefox firewall-config firewalld firewalld-filesystem firstboot \
flac-libs flashrom flatpak flatpak-libs flex flex-devel flite folks \
fontconfig fontconfig-devel fontpackages-filesystem fprintd fprintd-pam \
freeglut freerdp-libs freetype freetype-devel frei0r-plugins fribidi \
fribidi-devel fros fuse fuse-encfs fuse-libs fwupd fwupdate-efi \
fwupdate-libs fxload gamin gavl gawk gcc gcc-c++ gcc-c++-arm-linux-gnu \
gcc-c++-microblaze-linux-gnu gcc-gfortran gcc-microblaze-linux-gnu \
gcc-objc gcc-objc++ gcc-x86_64-linux-gnu GConf2 gcr gd gdb gdbm gdbm-devel \
gdisk gdk-pixbuf2 gdm gedit genisoimage geoclue2 geoclue2-libs \
geocode-glib GeoIP geoipupdate gettext gettext-common-devel gettext-devel \
gettext-libs gflags gflags-devel ghc-aeson ghc-array ghc-attoparsec \
ghc-base ghc-base64-bytestring ghc-base-unicode-symbols ghc-binary \
ghc-blaze-builder ghc-blaze-html ghc-blaze-markup ghc-bytestring \
ghc-conduit ghc-containers ghc-data-default ghc-deepseq ghc-digest \
ghc-directory ghc-dlist ghc-extensible-exceptions ghc-filepath \
ghc-hashable ghc-highlighting-kate ghc-hslua ghc-HTTP ghc-lifted-base \
ghc-monad-control ghc-mtl ghc-network ghc-old-locale ghc-old-time \
ghc-pandoc ghc-pandoc-types ghc-parsec ghc-pcre-light ghc-pretty \
ghc-primitive ghc-process ghc-random ghc-resourcet ghc-semigroups ghc-syb \
ghc-tagsoup ghc-template-haskell ghc-temporary ghc-texmath ghc-text \
ghc-time ghc-transformers ghc-transformers-base ghc-unix \
ghc-unordered-containers ghc-utf8-string ghc-vector ghc-void ghc-xml \
ghc-yaml ghc-zip-archive ghc-zlib ghostscript ghostscript-cups \
ghostscript-fonts giflib giflib-devel giflib-utils git gjs glade-libs \
glib glib2 glibc glibc-common glibc-devel glibc-headers glibmm24 \
glib-networking glog glusterfs glusterfs-api glusterfs-cli \
glusterfs-client-xlators glusterfs-fuse glusterfs-libs glx-utils gmock gmp \
gmp-devel gnome-abrt gnome-bluetooth gnome-bluetooth-libs gnome-boxes \
gnome-calculator gnome-classic-session gnome-clocks gnome-color-manager \
gnome-contacts gnome-desktop3 gnome-dictionary gnome-disk-utility \
gnome-documents gnome-documents-libs gnome-font-viewer \
gnome-getting-started-docs gnome-icon-theme gnome-icon-theme-extras \
gnome-icon-theme-symbolic gnome-initial-setup gnome-keyring \
gnome-keyring-pam gnome-menus gnome-online-accounts gnome-online-miners \
gnome-packagekit gnome-packagekit-common gnome-packagekit-installer \
gnome-packagekit-updater gnome-screenshot gnome-session \
gnome-session-xsession gnome-settings-daemon gnome-shell \
gnome-shell-extension-alternate-tab gnome-shell-extension-apps-menu \
gnome-shell-extension-common gnome-shell-extension-horizontal-workspaces \
gnome-shell-extension-launch-new-instance \
gnome-shell-extension-places-menu gnome-shell-extension-top-icons \
gnome-shell-extension-user-theme gnome-shell-extension-window-list \
gnome-software gnome-system-log gnome-system-monitor gnome-terminal \
gnome-terminal-nautilus gnome-themes-standard gnome-tweak-tool \
gnome-user-docs gnome-video-effects gnome-weather gnu-free-fonts-common \
gnu-free-mono-fonts gnu-free-sans-fonts gnu-free-serif-fonts gnupg2 gnutls \
gnutls-c++ gnutls-utils gobject-introspection gom \
google-crosextra-caladea-fonts google-crosextra-carlito-fonts google-gson \
google-noto-emoji-color-fonts gperftools-libs gpgme gpm-libs graphite2 \
graphite2-devel graphviz graphviz-devel graphviz-gd grep grilo \
grilo-plugins groff-base grub2 grub2-common grub2-efi-x64 grub2-pc \
grub2-pc-modules grub2-tools grub2-tools-extra grub2-tools-minimal grubby \
gsettings-desktop-schemas gsm gsound gspell gssdp gssproxy gstreamer \
gstreamer1 gstreamer1-plugins-bad-free gstreamer1-plugins-bad-free-gtk \
gstreamer1-plugins-base gstreamer1-plugins-good \
gstreamer1-plugins-ugly-free gstreamer-devel gstreamer-plugins-bad-free \
gstreamer-plugins-base gstreamer-plugins-base-devel \
gstreamer-plugins-base-tools gstreamer-plugins-good gstreamer-python \
gstreamer-python-devel gstreamer-tools gtk2 gtk2-devel gtk2-immodule-xim \
gtk3 gtk3-immodule-xim gtkmm24 gtkmm30 gtksourceview3 gtkspell3 \
gtk-update-icon-cache gtk-vnc2 gtkwave gucharmap gucharmap-libs gupnp \
gupnp-av gupnp-dlna gupnp-igd gutenprint gutenprint-cups gvfs gvfs-afc \
gvfs-afp gvfs-archive gvfs-client gvfs-fuse gvfs-goa gvfs-gphoto2 gvfs-mtp \
gvfs-smb gvnc gzip h5py hardlink harfbuzz harfbuzz-devel harfbuzz-icu hdf5 \
hdf5-devel hesiod hicolor-icon-theme highlight hostname hpijs hplip-common \
hplip-libs htop http-parser hunspell hunspell-en hunspell-en-GB \
hunspell-en-US hwdata hyperv-daemons hyperv-daemons-license hypervfcopyd \
hypervkvpd hypervvssd hyphen hyphen-en ibacm ibus ibus-chewing ibus-gtk2 \
ibus-gtk3 ibus-hangul ibus-kkc ibus-libpinyin ibus-libs ibus-m17n \
ibus-rawcode ibus-sayura ibus-setup ibus-table ibus-table-chinese icat \
icedax icedtea-web icu ilmbase imsettings imsettings-gsettings \
imsettings-libs indent infiniband-diags infiniband-diags-devel info \
initial-setup initial-setup-gui initscripts Installed intel-cmt-cat \
intel-cmt-cat-devel intltool ipa-client ipa-client-common ipa-common \
iproute iprutils ipset ipset-libs iptables iputils ipxe-roms-qemu \
irqbalance iscsi-initiator-utils iscsi-initiator-utils-iscsiuio iso-codes \
isomd5sum ivtv-firmware iw iwl1000-firmware iwl100-firmware iwl105-firmware \
iwl135-firmware iwl2000-firmware iwl2030-firmware iwl3160-firmware \
iwl3945-firmware iwl4965-firmware iwl5000-firmware iwl5150-firmware \
iwl6000-firmware iwl6000g2a-firmware iwl6000g2b-firmware iwl6050-firmware \
iwl7260-firmware jansson jasper jasper-libs java-1 java-11-openjdk \
java-11-openjdk-devel java-11-openjdk-headless java-11-openjdk-jmods \
javapackages-tools jbigkit-libs jimtcl jline jomolhari-fonts jpeginfo \
jpegoptim json-c json-c-devel jsoncpp jsoncpp-devel json-glib Judy \
kate-part kbd kbd-legacy kbd-misc kde-filesystem kdelibs kdelibs-common \
kdelibs-ktexteditor kdesdk-common kdesdk-kcachegrind kde-settings kernel \
kernel-devel kernel-headers kernel-module-sfc-RHEL7-3 kernel-tools \
kernel-tools-libs kernel-tools-libs-devel kexec-tools keybinder3 keyutils \
keyutils-libs keyutils-libs-devel khmeros-base-fonts khmeros-fonts-common \
kmod kmod-libs konsole kpartx kpatch krb5-devel krb5-libs krb5-workstation \
lame langpacks langtable langtable-data langtable-python lapack64 \
lapack64-devel lapack64-static lapack-devel lapack-static lcms2 ldns ledmon \
less leveldb leveldb-devel libabw libacl libaio libaio-devel libao \
libappstream-glib libarchive libassuan libasyncns libatasmart libattr \
libavc1394 libbasicobjects libblkid libblkid-devel libblockdev \
libblockdev-crypto libblockdev-fs libblockdev-loop libblockdev-mdraid \
libblockdev-nvdimm libblockdev-part libblockdev-swap libblockdev-utils \
libbluray libburn libbytesize libcacard libcanberra libcanberra-gtk2 \
libcanberra-gtk3 libcap libcap-devel libcap-ng libcdio libcdio-paranoia \
libcdr libcgroup libcgroup-tools libchamplain libchamplain-gtk libchewing \
libcmis libcollection libcom_err libcom_err-devel libconfig libconfuse \
libcroco libcryptui libcurl libcurl-devel libdaemon libdb libdb-devel \
libdb-utils libdhash libdmapsharing libdmx libdnet libdrm libdrm-devel \
libdv libdvdnav libdvdread libdwarf libedit libedit-devel libepoxy \
liberation-fonts-common liberation-mono-fonts liberation-sans-fonts \
liberation-serif-fonts libestr libetonyek libevdev libevent libexif \
libexttextcat libfastjson libfdt libfdt-devel libffi libffi-devel \
libfontenc libfprint libfreehand libftdi libftdi-devel libfullock libgcab1 \
libgcc libgcrypt libgdata libgdither libgee libgee06 libgepub libgexiv2 \
libgfortran libgfortran4 libgfortran5 libgfortran-static libglade2 libGLEW \
libglvnd libglvnd-egl libglvnd-gles libglvnd-glx libgnomekbd \
libgnome-keyring libgomp libgovirt libgpg-error libgphoto2 libgpod libgs \
libgsf libgtop2 libgudev1 libgusb libgweather libgxps libhangul libibumad \
libibverbs libical libICE libicu libidn libiec61883 libieee1284 \
libimobiledevice libini_config libinput libiodbc libipa_hbac libiptcdata \
libiscsi libisofs libjpeg-turbo libjpeg-turbo-devel libkadm5 libkkc \
libkkc-common libkkc-data liblangtag libldb liblouis liblouis-python \
libmarkdown libmbim libmbim-utils libmediaart libmediainfo libmfx \
libmfx-devel libmng libmnl libmnl-devel libmodman libmount libmount-devel \
libmpc libmpcdec libmpc-devel libmspack libmspub libmtp libmusicbrainz5 \
libmwaw libmx libndp libnetfilter_conntrack libnfnetlink libnfsidmap \
libnice libnl libnl3 libnl3-cli libnma libnm-gtk libnotify liboauth \
libodfgen libofa libogg liborcus libosinfo libpagemaker libpaper \
libpath_utils libpcap libpcap-devel libpciaccess libpeas libpeas-gtk \
libpeas-loader-python libpinyin libpinyin-data libpipeline libplist \
libpmem libpmemblk libpng libpng12 libpng12-devel libpng-devel libproxy \
libproxy-mozjs libpurple libpwquality libqmi libqmi-utils libquadmath \
libquadmath-devel librados2 LibRaw libraw1394 librbd1 librdmacm \
libref_array libreoffice-calc libreoffice-core libreoffice-data \
libreoffice-draw libreoffice-emailmerge libreoffice-graphicfilter \
libreoffice-gtk2 libreoffice-gtk3 libreoffice-impress libreofficekit \
libreoffice-langpack-en libreoffice-math libreoffice-opensymbol-fonts \
libreoffice-pdfimport libreoffice-pyuno libreoffice-ure \
libreoffice-ure-common libreoffice-writer libreoffice-x11 libreport \
libreport-anaconda libreport-centos libreport-cli libreport-filesystem \
libreport-gtk libreport-plugin-bugzilla libreport-plugin-mailx \
libreport-plugin-mantisbt libreport-plugin-reportuploader \
libreport-plugin-rhtsupport libreport-plugin-ureport libreport-python \
libreport-rhel-anaconda-bugzilla libreport-web libreswan librevenge \
librsvg2 libsamplerate libsane-hpaio libseccomp libsecret libselinux \
libselinux-devel libselinux-python libselinux-utils libsemanage \
libsemanage-python libsepol libsepol-devel libshout libsigc++20 libSM \
libsmartcols libsmbclient libsmbios libsndfile libsodium libsodium13 \
libsodium-devel libsoup libspectre libsrtp libss libssh libssh2 \
libssh2-devel libssh-devel libsss_autofs libsss_certmap libsss_idmap \
libsss_nss_idmap libsss_sudo libstaroffice libstdc++ libstdc++-devel \
libstoragemgmt libstoragemgmt-python libstoragemgmt-python-clibs \
libsysfs libtalloc libtar libtasn1 libtdb libteam libtevent libtheora \
libtiff libtiff-devel libtimezonemap libtirpc libtool libtool-ltdl \
libudisks2 libunistring libunwind libunwind-devel libusal libusb \
libusb-devel libusbmuxd libusbx libusbx-devel libuser libuser-python \
libutempter libuuid libuuid-devel libv4l libva libverto libverto-devel \
libverto-tevent libvirt-daemon libvirt-daemon-config-network \
libvirt-daemon-driver-interface libvirt-daemon-driver-network \
libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter \
libvirt-daemon-driver-qemu libvirt-daemon-driver-secret \
libvirt-daemon-driver-storage libvirt-daemon-driver-storage-core \
libvirt-daemon-driver-storage-disk libvirt-daemon-driver-storage-gluster \
libvirt-daemon-driver-storage-iscsi libvirt-daemon-driver-storage-logical \
libvirt-daemon-driver-storage-mpath libvirt-daemon-driver-storage-rbd \
libvirt-daemon-driver-storage-scsi libvirt-daemon-kvm libvirt-gconfig \
libvirt-glib libvirt-gobject libvirt-libs libvisio libvisual libvma \
libvma-devel libvorbis libvpx libwacom libwacom-data libwayland-client \
libwayland-cursor libwayland-egl libwayland-server libwbclient libwebp \
libwebp-devel libwebp-tools libwinpr libwnck3 libwpd libwpg libwps \
libwvstreams libX11 libX11-common libX11-devel libXau libXau-devel libXaw \
libxcb libxcb-devel libXcomposite libXcursor libXdamage libXdmcp libXext \
libXfixes libXfont libXfont2 libXft libXft-devel libXi libXinerama \
libxkbcommon libxkbcommon-x11 libxkbfile libxklavier libxml++ libxml2 \
libxml2-python libXmu libXp libXpm libXpm-devel libXrandr libXrender \
libXrender-devel libXres libXScrnSaver libxshmfence libxslt libXt libXtst \
libXv libXvMC libXxf86dga libXxf86misc libXxf86vm libyaml libzapojit libzip \
libzmf libzstd linux-firmware lklug-fonts lksctp-tools lldpad llvm \
llvm-devel llvm-libs llvm-private lmdb lm_sensors-libs Loaded lockdev \
logrotate lohit-assamese-fonts lohit-bengali-fonts lohit-devanagari-fonts \
lohit-gujarati-fonts lohit-kannada-fonts lohit-malayalam-fonts \
lohit-marathi-fonts lohit-nepali-fonts lohit-oriya-fonts \
lohit-punjabi-fonts lohit-tamil-fonts lohit-telugu-fonts lpsolve lrzsz \
lsof lsscsi lua lvm2 lvm2-libs lz4 lzo lzop m17n-contrib m17n-db m17n-lib \
m4 madan-fonts mailcap mailx make makeself man-db man-pages \
man-pages-overrides mariadb-libs marisa mdadm meanwhile media-player-info \
meld mesa-dri-drivers mesa-filesystem mesa-libEGL mesa-libgbm mesa-libGL \
mesa-libglapi mesa-libGLES mesa-libGLU mesa-libxatracker mesa-private-llvm \
meson metacity microcode_ctl minicom mlocate mobile-broadband-provider-info \
mock ModemManager ModemManager-glib mokutil motif mousetweaks \
mozilla-filesystem mozjs17 mozjs24 mozjs52 mpfr mpg123-libs mtdev mtools \
mtr mutter mythes mythes-en nano nasm nautilus nautilus-extensions \
nautilus-sendto ncompress ncurses ncurses-base ncurses-devel ncurses-libs \
ndctl ndctl-libs neon netcf-libs net-snmp-libs nettle nettle-devel \
net-tools NetworkManager NetworkManager-adsl NetworkManager-bluetooth \
NetworkManager-glib NetworkManager-libnm NetworkManager-libreswan \
NetworkManager-libreswan-gnome NetworkManager-ppp NetworkManager-team \
NetworkManager-tui NetworkManager-wifi NetworkManager-wwan newt newt-python \
nfs4-acl-tools nfs-utils nhn-nanum-fonts-common nhn-nanum-gothic-fonts \
ninja-build nmap nmap-ncat nm-connection-editor nspr nss nss-pem \
nss-softokn nss-softokn-freebl nss-sysinit nss-tools nss-util ntp \
ntpdate ntsysv numactl-libs numad numpy numpy-f2py nvme-cli ocl-icd \
ocl-icd-devel oddjob oddjob-mkhomedir okular okular-devel okular-libs opal \
openblas openblas-devel opencc openchange opencl-headers opencv opencv-core \
opencv-devel opencv-python OpenEXR-libs OpenImageIO-devel openjpeg2 \
openjpeg-devel openjpeg-libs openldap openocd open-sans-fonts openscap \
openscap-scanner opensm opensm-devel opensm-libs openssh openssh-clients \
openssh-server openssl openssl098e openssl-devel openssl-libs open-vm-tools \
open-vm-tools-desktop opus opus-devel opusfile opus-tools orc orca \
osinfo-db osinfo-db-tools os-prober overpass-fonts p11-kit p11-kit-trust \
p7zip PackageKit PackageKit-command-not-found PackageKit-glib \
PackageKit-gstreamer-plugin PackageKit-gtk3-module PackageKit-yum Packages \
pakchois paktype-naskh-basic-fonts pam pandoc pango pango-devel pangomm \
paps paps-libs paratype-pt-sans-fonts parted passwd patch patchutils \
pciutils pciutils-devel pciutils-libs pcre pcre2 pcre-devel pcsc-lite-libs \
perftest perl perl-autodie perl-Business-ISBN perl-Business-ISBN-Data \
perl-Carp perl-CGI perl-Compress-Raw-Bzip2 perl-Compress-Raw-Zlib \
perl-constant perl-Convert-BinHex perl-Data-Dumper perl-Data-OptList \
perl-devel perl-Devel-GlobalDestruction perl-Digest perl-Digest-HMAC \
perl-Digest-MD5 perl-Digest-SHA perl-Digest-SHA1 perl-Digest-SHA3 \
perl-Email-Date-Format perl-Email-Simple perl-Encode perl-Encode-Locale \
perl-Error perl-Exporter perl-ExtUtils-Install perl-ExtUtils-MakeMaker \
perl-ExtUtils-Manifest perl-ExtUtils-ParseXS perl-FCGI perl-File-FcntlLock \
perl-File-Listing perl-File-Path perl-File-Remove perl-File-Temp \
perl-Filter perl-Font-AFM perl-Font-TTF perl-Getopt-Long perl-gettext \
perl-Git perl-HTML-Format perl-HTML-Parser perl-HTML-Tagset perl-HTML-Tree \
perl-HTTP-Cookies perl-HTTP-Daemon perl-HTTP-Date perl-HTTP-Message \
perl-HTTP-Negotiate perl-HTTP-Tiny perl-Image-ExifTool perl-IO-Compress \
perl-IO-HTML perl-IO-Socket-IP perl-IO-Socket-SSL perl-IO-String \
perl-IO-stringy perl-libs perl-libwww-perl perl-LWP-MediaTypes perl-macros \
perl-Mail-Box perl-Mail-IMAPClient perl-Mail-Sendmail perl-MailTools \
perl-Mail-Transport-Dbx perl-MIME-Lite perl-MIME-tools perl-MIME-Types \
perl-Mozilla-CA perl-Net-HTTP perl-Net-LibIDN perl-Net-SMTP-SSL \
perl-Net-SSLeay perl-Object-Realize-Later perl-Package-Generator \
perl-Params-Util perl-parent perl-Parse-RecDescent perl-PathTools \
perl-Pod-Escapes perl-podlators perl-Pod-Perldoc perl-Pod-Simple \
perl-Pod-Usage perl-Regexp-Assemble perl-Scalar-List-Utils perl-Socket \
perl-srpm-macros perl-Storable perl-Sub-Exporter \
perl-Sub-Exporter-Progressive perl-Sub-Install perl-TermReadKey \
perl-Test-Harness perl-TeX-Hyphen perl-Text-Autoformat perl-Text-CharWidth \
perl-Text-Iconv perl-Text-ParseWords perl-Text-Reform perl-Text-WrapI18N \
perl-Thread-Queue perl-threads perl-threads-shared perl-TimeDate \
perl-Time-HiRes perl-Time-Local perl-Time-Piece perl-URI perl-User-Identity \
perl-WWW-RobotRules perl-XML-Parser pexpect phonon phonon-backend-gstreamer \
php-cli php-common picosat picosat-devel pinentry pinentry-gtk pinfo pixman \
pixman-devel pkgconfig plugins: plymouth plymouth-core-libs \
plymouth-graphics-libs plymouth-plugin-label plymouth-plugin-two-step \
plymouth-scripts plymouth-system-theme plymouth-theme-charge pm-utils \
pnm2ppa po-debconf policycoreutils policycoreutils-python polkit \
polkit-pkla-compat polkit-qt poppler poppler-data poppler-glib \
poppler-utils popt postfix ppp procmail procps-ng procps-ng-devel \
protobuf protobuf-c protobuf-c-devel protobuf-python psacct psmisc pth \
ptlib pulseaudio pulseaudio-gdm-hooks pulseaudio-libs \
pulseaudio-libs-glib2 pulseaudio-module-bluetooth pulseaudio-module-x11 \
pulseaudio-utils putty pycairo pygobject2 pygpgme pygtk2 pygtk2-devel \
pygtk2-libglade pykickstart pyldb pyliblzma pyOpenSSL pyparsing pyparted \
PyQt4 PyQt4-devel pytalloc pytest python python2-absl-py python2-attrs \
python2-blockdev python2-crypto python2-cryptography python2-cytoolz \
python2-futures python2-gflags python2-graphitesend python2-ipaclient \
python2-ipalib python2-jsonpickle python2-jsonschema python2-jupyroot \
python2-jupyter-core python2-leveldb python2-llfuse python2-lmdb \
python2-matplotlib python2-nbformat python2-numpy python2-olefile \
python2-parso python2-pyasn1 python2-pyasn1-modules python2-pyatspi \
python2-pycosat python2-pydot python2-pygraphviz python2-pyrsistent \
python2-pysocks python2-pytest-runner python2-rpm-macros \
python2-scikit-image python2-subprocess32 python2-toolz python2-wcwidth \
python3 python36-absl-py python36-asn1crypto python36-attrs \
python36-backports_abc python36-brotli python36-cairo python36-cairo-devel \
python36-cffi python36-conda python36-crypto python36-cryptography \
python36-cytoolz python36-decorator python36-docutils python36-flask \
python36-idna python36-importlib-metadata python36-importlib-resources \
python36-jinja2 python36-jsonpickle python36-jsonschema python36-jupyroot \
python36-jupyter-core python36-leveldb python36-llfuse python36-lxml \
python36-m2crypto python36-markdown python36-markupsafe python36-nbformat \
python36-numpy python36-olefile python36-parso python36-pillow python36-ply \
python36-pyasn1 python36-pyasn1-modules python36-pycosat python36-pycparser \
python36-pydot python36-pygments python36-pygraphviz python36-pyqt4-sip \
python36-pyrsistent python36-pysocks python36-pytest-runner python36-scapy \
python36-six python36-sphinx python36-terminado python36-toolz \
python36-virtualenv python36-wcwidth python36-werkzeug python36-zipp \
python3-html2text python3-libs python3-pip python3-service-identity \
python3-setuptools python3-sphinx python3-sphinx-common python-augeas \
python-backports python-backports-ssl_match_hostname python-bleach \
python-blivet python-brlapi python-carbon python-cffi python-chardet \
python-configobj python-configshell python-coverage python-cups \
python-dateutil python-decorator python-deltarpm python-devel python-di \
python-dmidecode python-dns python-enum34 python-ethtool python-firewall \
python-gmpy2 python-gobject python-gobject-base python-gssapi python-idna \
python-iniparse python-inotify python-ipaddress python-IPy python-ipython \
python-javapackages python-jinja2 python-jupyter-core-doc python-jwcrypto \
python-kitchen python-kmod python-ldap python-libipa_hbac python-libs \
python-linux-procfs python-lxml python-markupsafe python-marshmallow \
python-matplotlib python-matplotlib-qt4 python-matplotlib-tk python-meh \
python-meh-gui python-mistune python-netaddr python-netifaces \
python-networkx python-nss python-ntplib python-OpenImageIO python-pandas \
python-perf python-pillow python-ply python-progressbar python-pwquality \
python-pyblock python-pybloomfiltermmap python-pycparser python-pycurl \
python-pygments python-pyudev python-qrcode-core python-requests \
python-rpm-macros python-rtslib python-schedutils python-setuptools \
python-six python-slip python-slip-dbus python-smbc python-srpm-macros \
python-sssdconfig python-sss-murmur python-tdb python-urlgrabber \
python-urllib3 python-urwid python-virtualenv python-werkzeug python-yubico \
pytz pyusb pyxattr PyYAML qca2 qemu-common qemu-guest-agent qemu-img \
qemu-kvm qemu-kvm-common qemu-system-x86 qodem qpdf-libs qrencode-libs \
qscintilla-python qscintilla-python-devel qt qterminal qtermwidget \
qt-settings qt-x11 quilt quota quota-nls radvd raptor2 rarian rarian-compat \
rasqal rcs rdate rdma-core rdma-core-devel readline readline-devel realmd \
redhat-lsb-core redhat-lsb-submod-security redhat-menus redhat-rpm-config \
redland redland-virtuoso rest rfkill rhino rhythmbox rng-tools rootfiles \
rpcbind rpm rpm-build rpm-build-libs rpm-libs rpm-python rpm-sign rsync \
rsyslog rtkit sakura samba-client samba-client-libs samba-common \
samba-common-libs samba-libs sane-backends sane-backends-drivers-scanners \
sane-backends-libs satyr sbc scalapack-common scap-security-guide \
scikit-image-tools scipy scl-utils screen SDL sdparm seabios-bin seahorse \
seavgabios-bin sed selinux-policy selinux-policy-targeted setools-libs \
setroubleshoot setroubleshoot-plugins setroubleshoot-server setserial setup \
setuptool sfutils sg3_utils sg3_utils-devel sg3_utils-libs sgabios-bin \
sgml-common sgpio shadow-utils shared-desktop-ontologies shared-mime-info \
shim-x64 shotwell sil-abyssinica-fonts sil-nuosu-fonts sil-padauk-fonts \
sip skkdic slang smartmontools smc-fonts-common smc-meera-fonts snappy \
sockperf soprano sos sound-theme-freedesktop soundtouch sox spax \
speech-dispatcher speech-dispatcher-python speex spice-glib spice-gtk3 \
spice-server spice-vdagent sqlite sqlite2 squashfs-tools squashfuse \
squashfuse-devel squashfuse-libs sssd sssd-ad sssd-client sssd-common \
sssd-common-pac sssd-ipa sssd-krb5 sssd-krb5-common sssd-ldap sssd-proxy \
startup-notification stix-fonts strace strigi-libs strongswan subversion \
subversion-libs sudo sushi swig sysstat system-config-printer \
system-config-printer-libs system-config-printer-udev systemd systemd-devel \
systemd-libs systemd-python systemd-sysv systemtap systemtap-client \
systemtap-devel systemtap-runtime systemtap-sdt-devel sysvinit-tools \
taglib tagsoup tar targetcli tcl tcl-devel tcl-tclreadline-devel tcpdump \
tcp_wrappers tcp_wrappers-libs tcsh teamd telepathy-farstream \
telepathy-filesystem telepathy-gabble telepathy-glib telepathy-haze \
telepathy-logger telepathy-mission-control telepathy-salut tigervnc-license \
tigervnc-server-minimal time tio tk tk-devel tmux totem totem-nautilus \
totem-pl-parser traceroute tracker tree trousers ttmkfdir tuned tzdata \
tzdata-java uboot-images-armv7 uboot-images-armv8 uboot-tools \
ucs-miscfixed-fonts udisks2 unbound-libs unoconv unzip upower \
urw-base35-bookman-fonts urw-base35-c059-fonts urw-base35-d050000l-fonts \
urw-base35-fonts urw-base35-fonts-common urw-base35-gothic-fonts \
urw-base35-nimbus-mono-ps-fonts urw-base35-nimbus-roman-fonts \
urw-base35-nimbus-sans-fonts urw-base35-p052-fonts \
urw-base35-standard-symbols-ps-fonts urw-base35-z003-fonts usb_modeswitch \
usb_modeswitch-data usbmuxd usbredir usbutils usermode ustr util-linux \
uucp valgrind valgrind-devel vim vim-common vim-enhanced vim-filesystem \
vim-minimal vinagre vino virt-what vlgothic-fonts volume_key-libs \
vorbis-tools vte291 vte3 vte-profile vtun wavpack webkitgtk3 webkitgtk4 \
webkitgtk4-jsc webrtc-audio-processing wget which wodim words \
wpa_supplicant wqy-microhei-fonts wqy-zenhei-fonts wvdial wxGTK-devel \
xcb-util xdg-desktop-portal xdg-desktop-portal-gtk xdg-user-dirs \
xdg-user-dirs-gtk xdg-utils xfsdump xfsprogs xkeyboard-config xml-common \
xmlrpc-c xmlrpc-c-client xmlsec1 xmlsec1-openssl xorg-x11-apps \
xorg-x11-drivers xorg-x11-drv-ati xorg-x11-drv-dummy xorg-x11-drv-evdev \
xorg-x11-drv-fbdev xorg-x11-drv-intel xorg-x11-drv-nouveau xorg-x11-drv-qxl \
xorg-x11-drv-synaptics xorg-x11-drv-v4l xorg-x11-drv-vesa \
xorg-x11-drv-vmmouse xorg-x11-drv-vmware xorg-x11-drv-void \
xorg-x11-drv-wacom xorg-x11-fonts-100dpi xorg-x11-fonts-ISO8859-1-100dpi \
xorg-x11-fonts-misc xorg-x11-fonts-Type1 xorg-x11-font-utils \
xorg-x11-proto-devel xorg-x11-server-common xorg-x11-server-utils \
xorg-x11-server-Xorg xorg-x11-utils xorg-x11-xauth xorg-x11-xbitmaps \
xorg-x11-xinit xorg-x11-xkb-utils xrt xterm xvattr xz xz-devel xz-libs \
xz-lzma-compat yajl yaml-cpp yelp yelp-libs yelp-xsl yum yum-langpacks \
yum-metadata-parser yum-plugin-fastestmirror yum-utils zenity zeromq zip \
zlib zlib-devel zstd
Reboot then install all U25-related software and utilities:
cd ~
mkdir u25
cd u25
wget https://download.lenovo.com/servers/mig/2020/12/23/43128/xlnx-lnvgy_utl_nic_u25-2.8.372_linux_x86-64.tgz
tar -xzvf xlnx-lnvgy_utl_nic_u25-2.8.372_linux_x86-64.tgz
cp ./xlnx-lnvgy_utl_nic_u25-2.8.372_linux_x86-64/* .
rm -R xlnx-lnvgy_utl_nic_u25-2.8.372_linux_x86-64
yum localinstall xrt_202020.2.8.372_7.4.1708-x86_64-xrt.rpm
yum localinstall xilinx-cmc-u25-2.1.2-2955241.noarch.rpm
yum localinstall xilinx-u25-gen3x8-xdma-validate-1-2954712.noarch.rpm
yum localinstall xilinx-u25-gen3x8-xdma-base-1-2953517.noarch.rpm
cd ~/u25/
wget https://download.lenovo.com/servers/mig/2020/12/23/43129/xlnx-lnvgy_dd_nic_u25-4.15.10.1003_linux_x86-64.tgz
tar -xzvf xlnx-lnvgy_dd_nic_u25-4.15.10.1003_linux_x86-64.tgz
cp ./xlnx-lnvgy_dd_nic_u25-4.15.10.1003_linux_x86-64/* .
rm -R xlnx-lnvgy_dd_nic_u25-4.15.10.1003_linux_x86-64/
rpmbuild --rebuild sfc-4.15.10.1003-1.src.rpm
rpm -ivh /root/rpmbuild/RPMS/x86_64/kernel-module-sfc-RHEL7-3.10.0-1160.88.1.el7.x86_64-4.15.10.1003-1.x86_64.rpm
modprobe sfc
lsmod | grep sfc
wget https://download.lenovo.com/servers/mig/2021/01/06/43174/xlnx-lnvgy_fw_nic_u25-8.1.3.1011-1_linux_x86-64.tgz
tar -xzvf xlnx-lnvgy_fw_nic_u25-8.1.3.1011-1_linux_x86-64.tgz
cp ./xlnx-lnvgy_fw_nic_u25-8.1.3.1011-1_linux_x86-64/* .
rm -R xlnx-lnvgy_fw_nic_u25-8.1.3.1011-1_linux_x86-64/
yum localinstall sfutils-8.1.3.1011-1.x86_64.rpmChoose the correct version of Java to be the default.
sudo alternatives --config javaProgram Configuration FLASH Memory
Load your Vivado or Vivado Lab settings64.sh and start xsdb. The after 6000 command waits 6 seconds for Xilinx-Compatible JTAG adapters based on the FX2 to update their firmware and needs to be run once after every time the adapter is powered.
source /tools/Xilinx/Vivado/2021.1/settings64.sh
xsdbThe following prepares the XCZU19EG for Flash programming:
connect
after 6000
targets
targets -set -nocase -filter {name =~ "*PSU*"}
mwr 0xff5e0200 0x0100
rst -system
after 1000
targets -set -nocase -filter {name =~ "*APU*"}
mwr 0xffff0000 0x14000000
mask_write 0xFD1A0104 0x501 0x0
targets -set -nocase -filter {name =~ "*A53*#0"}
stop
targets
disconnect
exit
Program the QSPI Flash:
program_flash -f BOOT.BIN -offset 0 -flash_type qspi-x4-single -fsbl fsbl.elf -cable type xilinx_tcf url TCP:127.0.0.1:3121
JTAG Using UrJTAG
UrJTAG is a low-level tool for communicating with JTAG devices. It supports Xilinx Platform Cable USB II adapters and clones. Main use is EXTEST pin toggling although it is theoretically possible to program the FPGA using an SVF file generated from the Vivado Tcl Console.
Compile and Install UrJTAG
cd ~
wget https://downloads.sourceforge.net/project/urjtag/urjtag/2021.03/urjtag-2021.03.tar.xz
sha256sum urjtag-2021.03.tar.xz
echo b0a2eaa245513af096dc4d770109832335c694c6c12aa5e92fefae8685416f1c should be the SHA256 Checksum
tar -xvf urjtag-2021.03.tar.xz
cd urjtag-2021.03/
./configure
make
sudo make install
sudo ldconfigCreate UrJTAG-Compatible JTAG Definition Files from BSDL Files
Xilinx's Zynq Ultrascale+ BSDL Files include STD_1149_6_2003.all definitions that UrJTAG's bsdl2jtag cannot process and must therefore be removed. The included xczu19eg_ffvc1760.jtag and zynqu_arm_dap.jtag files are processed and tested to work with UrJTAG.
Add XCZU19EG FFVC1760 JTAG Bit Definitions to UrJTAG
From the directory containing the .jtag files run the following commands which create PART and STEPPINGS files for the XCZU19EG. These commands assume UrJTAG installed support files to the default /usr/local/share/ directory. Values were found by running the UrJTAG detect command which reads the Device Id from the JTAG chain. First 4 bits (0001) are the STEPPING, next 16 bits (0100011101011000) are the PART, last 12 bits (01000111011) are the MANUFACTURER.
sudo su
echo "# Zynq Ultrascale+ (XCZUxxEG)" >>/usr/local/share/urjtag/xilinx/PARTS
echo -e "0100011101011000\txczu19eg_1760\txczu19eg_ffvc1760" >>/usr/local/share/urjtag/xilinx/PARTS
mkdir /usr/local/share/urjtag/xilinx/xczu19eg_1760
touch /usr/local/share/urjtag/xilinx/xczu19eg_1760/STEPPINGS
echo "0001 xczu19eg_1760 1" >>/usr/local/share/urjtag/xilinx/xczu19eg_1760/STEPPINGS
echo "0000 xczu19eg_1760 0" >>/usr/local/share/urjtag/xilinx/xczu19eg_1760/STEPPINGS
cp xczu19eg_ffvc1760.jtag /usr/local/share/urjtag/xilinx/xczu19eg_1760/xczu19eg_1760
echo -e "01000111011\tarm\t\tARM" >>/usr/local/share/urjtag/MANUFACTURERS
mkdir /usr/local/share/urjtag/arm
touch /usr/local/share/urjtag/arm/PARTS
echo -e "1011101000000000\tzynqu_arm_dap\tzynqu_arm_dap" >>/usr/local/share/urjtag/arm/PARTS
mkdir /usr/local/share/urjtag/arm/zynqu_arm_dap
touch /usr/local/share/urjtag/arm/zynqu_arm_dap/STEPPINGS
echo "0101 zynqu_arm_dap 5" >>/usr/local/share/urjtag/arm/zynqu_arm_dap/STEPPINGS
cp zynqu_arm_dap.jtag /usr/local/share/urjtag/arm/zynqu_arm_dap/zynqu_arm_dap
exit
Connect JTAG Adapter and Allow Vivado to Update Platform Cable USB II Firmware
Connect your JTAG Adapter to the Alveo U25 using the Alveo U25 JTAG Adapter. The Alveo needs to be powered over its PCIe connection.
If you are using a Platform Cable USB II compatible adapter it will show up under lsusb as 03fd:0013 Xilinx, Inc. In this state it CANNOT be used for JTAG.
Run Xilinx's xsdb which comes with Vivado:
source /tools/Xilinx/Vivado/2021.2/settings64.sh
xsdbIn xsdb run the following commands to bring the Zynq out of the L2 Cache Reset state and into the Power On Reset and External Debug Request state. The 10 second delay (after 10000) allows for Xilinx's hw_server to update the Platform Cable II Firmware in the background.
connect
after 10000
targets
targets -set -nocase -filter {name =~ "*APU*"}
mwr 0xffff0000 0x14000000
mask_write 0xFD1A0104 0x501 0x0
targets -set -nocase -filter {name =~ "*A53*#0"}
stop
targets
exit from xsdb. lsusb should now show 03fd:0008 Xilinx, Inc. Platform Cable USB II. The JTAG adapter is ready to be used by UrJTAG.
Begin a UrJTAG Session
sudo jtag to start UrJTAG with access to USB. You should see the jtag> command prompt. A JTAG Overview may be helpful before you begin. Note that shift ir and shift dr need to be run to change the debug target's state. Running instruction commands only changes UrJTAG's internal state.
Valid signal names can be found in the xczu19eg_ffvc1760.jtag file.
cable xpc_ext selects the Xilinx Platform Cable II, external JTAG chain
detect finds all devices in the JTAG chain
print chain prints all devices in the JTAG chain
part 1 selects the Zynq for JTAG communication. Good practise to always make this explicit.
instruction EXTEST select the External Test Function
shift ir shifts EXTEST into the JTAG Instruction Register to put the device into EXTEST mode
shift dr shifts the Data Register containing all pin states into UrJTAG memory
dr prints the full contents of the JTAG Data Register.
It is more useful to read individual signals:
get signal PS_MODE0 displays the value of pin PS_MODE0(AA27)
get signal PS_MODE1 displays the value of pin PS_MODE1(AC28)
get signal PS_MODE2 displays the value of pin PS_MODE2(AA28)
get signal PS_MODE3 displays the value of pin PS_MODE3(AB28)
The above MODE pins define Quad-SPI as the Boot Mode.
get signal PS_ERROR_OUT indicates a Power, Hardware, or PMU Exception when =1.
get signal PS_INIT_B indicates a CRC Error in the PL Bitstream when =1.
get signal PS_ERROR_STATUS indicates a lockdown state or PMU Status Error when =1.
get signal PS_DONE indicates PL Configuration completed when =1.
reset resets the JTAG chain and enters Bypass Mode
quit exits UrJTAG
The included UrJTAG scripts getallio and getallpsmio will return the states of all the Programmable Logic (PL) I/O pins and Processing System (PS) Multiplexed I/O pins, respectively.
include /DOWNLOAD_DIRECTORY/getallioA sequence of instructions like the following can be used to set IO pins. Be careful which signals you set. They should be wired appropriately on the board. Refer to xczu19eg_ffvc1760.jtag for signal names.
instruction SAMPLE/PRELOAD
shift ir
shift dr
get signal IO_??
instruction EXTEST
shift ir
set signal IO_?? out 0
shift dr
instruction SAMPLE/PRELOAD
shift ir
shift dr
get signal IO_??
instruction EXTEST
shift ir
set signal IO_?? in
shift dr
instruction SAMPLE/PRELOAD
shift ir
shift dr
get signal IO_??Reading Back the Zynq Configuration Memory
In the Vivado Tcl Console, run:
readback_hw_device [current_hw_device] -readback_file zu19eg_u25_r.rbd -bin_file zu19eg_u25_b.bin
Miscallaneous Notes
XCU25==XCZU19EG-FFVC1760 Banks from Zynq Ultrascale+ Device Packaging and Pinouts.
Useful Links
Zynq Ultrascale+ MPSoC Overview
Zynq Ultrascale+ MPSoC Design Hub
Zynq Ultrascale+ Technical Reference Manual
Zynq Ultrascale+ Device Packaging and Pinouts
Zynq Ultrascale+ MPSoC Datasheet
Zynq UltraScale+ Devices Register Reference(HTML) is Downloadable
ServeTheHome Forum post about the Alveo U25
Bare Metal Application Development
XRT Dual-Stage Platform - U25 shell stage is included in the U25 FPGA Utility (2.8.372) package. Base stage is not public.
Flashing Shell to U25 Support Forum Post
U25 Xilinx Lenovo Page has a Production Package and a Utilities Package
U25 X2 NIC Driver (4.15.10.1003)
U25 X2 NIC Firmware (8.1.3.1011-1)
Alveo U25N Product Brief is almost identical but lacks the FPGA to PCIe connections.
MT40A512M16LY-062E(D9WFJ FBGA Code) is the DDR4 memory IC used on the U25.
MT25QU01(RW188 FBGA Code) is the QSPI Configuration Memory flash IC used on the U25.