search

natwarrior / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
0 stars 0 forks source link

bus speed dynamic change #287

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What is the expected output? What do you see instead?

if the bus speed changes the program doenst detect this and i have te open the 
program to reset it to get correct cpu readings.

What version of the product are you using? On what operating system?

0.3.2 on windows 7 home premium

Please provide any additional information below.

i suggest making a quickfix by adding a reset button to the gadget or to make a 
timed reset possible?

Please attach a Report created with "File / Save Report...".

Original issue reported on code.google.com by Stevenva...@gmail.com on 9 Nov 2011 at 11:25

Attachments:

GoogleCodeExporter commented 9 years ago 
There is already a Reset command on the main GUI (File / Reset).

Why does the bus speed change? Are you using a software to change it manually?

Original comment by moel.mich on 15 Jan 2012 at 5:55

GoogleCodeExporter commented 9 years ago 
the bus speed changes because my pc has an overclock button , then the bus 
speed changes,

also the bus speed changes outside of that for optimal usage of power, i think 
its the msi app thats dynamicly changes the bus speed , this makes the reading 
almost always wrong , a function to reset every 5 minutes or so would be nice

Original comment by Stevenva...@gmail.com on 15 Jan 2012 at 6:37

GoogleCodeExporter commented 9 years ago 
Can you save a few reports at different bus speeds with version 0.4.0 Beta?

What are you using as reference to compare to? CPU-Z?

Original comment by moel.mich on 15 Jan 2012 at 6:45

GoogleCodeExporter commented 9 years ago 
I have a similar problem on OHM 0.4.0. I am using an i5-2500K on an Asus 
P8Z68-V PRO. The motherboard is dynamically changing the multiplier but keeping 
the bus speed at my chosen set point of 105 MHz. When I first used OHM, I did 
have the bus speed set at 104 MHz. I then changed it to 105 MHz using the Asus 
Utility TurboV EVO to squeeze out just a bit more performance, but the bus 
speed reading in OHM stayed at the old set point of 104 MHz. I have tried to do 
File --> Reset a few times but the value stays at 104 MHz in OHM. I have 
attached some reports and screen shots. As a result, the CPU Core speeds 
incorrectly report compared to the Asus Utility tool and CPU-ID.

Original comment by jllanig...@gmail.com on 24 Feb 2012 at 12:51

Attachments:

GoogleCodeExporter commented 9 years ago 
I have this issue also, on a AMD Piledriver core cpu 8350. OpenHardwareMonitor 
shows bus speed as 510mhz which is much higher than it should be, causing the 
core speed to be wrong. Bus speed should read 200mhz.

Original comment by plywoo...@gmail.com on 18 Nov 2012 at 2:26