Testing lasted master build. I’ve noticed on both rigs that during benchmarking, it would at times not switch to next algorithm upon switch interval (900 for me), and will once again continue to benchmark the same algorithm. Sometimes this does it once, but have seen it go on for up to 1 hour (when it was supposed to switch after 15 min, as you can see with lbry below). Thanks.
Edit: Xevan also benched for 1 hour before switching.
Edit 2: After looking through the switch, it actually takes 2 turns for each algorithm instead of 1, and even though it said on top it's been active for 1 hour, in reality, it is actually 30 min (as I have it set at 900 interval), so the reported active time shown is double of its actual value.
Edit 3: Confirmed this also happens during regular mining session after benchmarking is complete. So in order to get the right interval I want, I need to cut seconds by half.
Thank you as always!
Below is log of current benchmarking taking place:
Idle: 1
Speed Exited Active Cnt Command
----- ------ ------ --- -------
2.36 GH/s 00:00:00 00:01:00 Once Bin\NVIDIA-TPruvot\ccminer.exe -a lbry -o
stratum+tcp://lbry.mine.ahashpool.com:3334 -u
(address deleted for public post) -p
ID=Miner,c=BTC -d 0,1,2,3,4,5,6,7,8,9
--api-remote
Speed Started Active Cnt Command
----- ------- ------ --- -------
0.00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-Alexis78cuda9\ccminer_x86.exe -a xevan
-o stratum+tcp://xevan.mine.ahashpool.com:3739 -u
(deleted for public post) -p
ID=Miner,c=BTC -d 0,1,2,3,4,5,6,7,8,9
--api-remote
Last Refresh: 01/15/2018 05:38:22
Sleep 900 sec
Running:
Speed Started Active Cnt Command
----- ------- ------ --- -------
0.00 PH/s 00:00:15 00:00:15 Once Bin\NVIDIA-Alexis78cuda9\ccminer_x86.exe -a xevan
-o stratum+tcp://xevan.mine.ahashpool.com:3739 -u
(deleted for public post) -p
ID=Miner,c=BTC -d 0,1,2,3,4,5,6,7,8,9
--api-remote
Hello,
Testing lasted master build. I’ve noticed on both rigs that during benchmarking, it would at times not switch to next algorithm upon switch interval (900 for me), and will once again continue to benchmark the same algorithm. Sometimes this does it once, but have seen it go on for up to 1 hour (when it was supposed to switch after 15 min, as you can see with lbry below). Thanks.
Edit: Xevan also benched for 1 hour before switching.
Edit 2: After looking through the switch, it actually takes 2 turns for each algorithm instead of 1, and even though it said on top it's been active for 1 hour, in reality, it is actually 30 min (as I have it set at 900 interval), so the reported active time shown is double of its actual value.
Edit 3: Confirmed this also happens during regular mining session after benchmarking is complete. So in order to get the right interval I want, I need to cut seconds by half.
Thank you as always!
Below is log of current benchmarking taking place:
Idle: 1
2.36 GH/s 00:00:00 00:01:00 Once Bin\NVIDIA-TPruvot\ccminer.exe -a lbry -o stratum+tcp://lbry.mine.ahashpool.com:3334 -u (address deleted for public post) -p ID=Miner,c=BTC -d 0,1,2,3,4,5,6,7,8,9 --api-remote
1BTC = 13597.38 USD
Type: NVIDIA
Miner Algorithm Speed mBTC/Day BTC/Day Bias USD/Day
ccminerAlexis78 Nist5 386.61 MH/s 5.656 0.00566 5.656 76.908 CcminerTpruvot Lbry 2.36 GH/s 2.102 0.00210 2.102 28.580 CcminerAlexis78cuda9 Xevan Benchmarking Benchmarking Benchmarking ...rking CcminerTpruvotcuda9 Phi Benchmarking Benchmarking Benchmarking ...rking Palgin NeoScrypt Benchmarking Benchmarking Benchmarking ...rking ccminerAlexis78 Hsr Benchmarking Benchmarking Benchmarking ...rking ccminerAlexis78 C11 Benchmarking Benchmarking Benchmarking ...rking ccminerAlexis78 X17 Benchmarking Benchmarking Benchmarking ...rking ccminerAlexis78 Lyra2RE2 Benchmarking Benchmarking Benchmarking ...rking
Running:
0.00 PH/s 00:00:00 00:00:00 Once Bin\NVIDIA-Alexis78cuda9\ccminer_x86.exe -a xevan -o stratum+tcp://xevan.mine.ahashpool.com:3739 -u (deleted for public post) -p ID=Miner,c=BTC -d 0,1,2,3,4,5,6,7,8,9 --api-remote
Last Refresh: 01/15/2018 05:38:22 Sleep 900 sec
Running:
0.00 PH/s 00:00:15 00:00:15 Once Bin\NVIDIA-Alexis78cuda9\ccminer_x86.exe -a xevan -o stratum+tcp://xevan.mine.ahashpool.com:3739 -u (deleted for public post) -p ID=Miner,c=BTC -d 0,1,2,3,4,5,6,7,8,9 --api-remote
Last Refresh: 01/15/2018 05:53:22 Sleep 900 sec