search

networkupstools / nut-ddl

Network UPS Tools Devices Dumps Library
http://networkupstools.org/ddl/index.html#_supported_devices
4 stars 16 forks source link

APC #24

Closed jimklimov closed 1 year ago

jimklimov commented 2 years ago

From mailing list:

[Nut-upsdev] No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.27'! Please report it to NUT developers, with an 'upsc' output for your device.


ambient.1.humidity.alarm.high: 60.00
ambient.1.humidity.alarm.low: 30.00
ambient.1.temperature.alarm.high: 40.00
ambient.1.temperature.alarm.low: 10.00
battery.charge: 100.00
battery.date: 08/08/2015
battery.runtime: 6900.00
battery.runtime.low: 120
battery.voltage: 54.50
device.mfr: APC
device.model: Smart-UPS 3000
device.serial: AS1532232414
device.type: ups
driver.name: snmp-ups
driver.parameter.pollinterval: 2
driver.parameter.port: ups1.lw
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.data: apcc MIB 1.2
driver.version.internal: 0.97
input.frequency: 50.00
input.sensitivity: high
input.transfer.high: 253
input.transfer.low: 207
input.transfer.reason: noTransfer
input.voltage: 228.80
input.voltage.maximum: 228.80
input.voltage.minimum: 226.00
output.current: 0.60
output.frequency: 50.00
output.voltage: 228.80
output.voltage.nominal: 230
ups.delay.shutdown: 120
ups.delay.start: 10
ups.firmware: UPS 09.3 (ID18)
ups.id: APCUPS-1
ups.load: 5.00
ups.mfr: APC
ups.mfr.date: 08/08/2015
ups.model: Smart-UPS 3000

device.serial: AS1532232414 device.type: ups driver.name: snmp-ups driver.parameter.pollinterval: 2 driver.parameter.port: ups1.lw driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: apcc MIB 1.2 driver.version.internal: 0.97 input.frequency: 50.00 input.sensitivity: high input.transfer.high: 253 input.transfer.low: 207 input.transfer.reason: noTransfer input.voltage: 228.80 input.voltage.maximum: 228.80 input.voltage.minimum: 226.00 output.current: 0.60 output.frequency: 50.00 output.voltage: 228.80 output.voltage.nominal: 230 ups.delay.shutdown: 120 ups.delay.start: 10 ups.firmware: UPS 09.3 (ID18) ups.id: APCUPS-1 ups.load: 5.00 ups.mfr: APC ups.mfr.date: 08/08/2015 ups.model: Smart-UPS 3000 ups.serial: AS1532232414 ups.status: OL ups.temperature: 23.30 ups.test.date: 03/24/2022 ups.test.result: InvalidTest



Note: this is from 2.7.4; not sure if 2.8.0+ would suggest the report if some OID does respond.