System info

Entry	Details
OS	Ubuntu 16.04 LTS
Kernel version	4.4.0-21-generic
New install	yes
DKMS	yes
Compiler	gcc-5.4.1

Device info

Device ID: run lsusb |grep -i mediatek

General info:

03:00.0 Network controller: MEDIATEK Corp. MT7630e 802.11bgn Wireless Network Adapter
    Subsystem: Foxconn International, Inc. MT7630e 802.11bgn Wireless Network Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at 9b100000 (32-bit, non-prefetchable) [size=1M]
    Capabilities: <access denied>
    Kernel driver in use: mt7630e
    Kernel modules: mt7630e

04:00.0 3D controller: NVIDIA Corporation GK208M [GeForce 920M] (rev a1)
    Subsystem: ASUSTeK Computer Inc. GK208M [GeForce 920M]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 49
    Region 0: Memory at 9a000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at c0000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at 3000 [size=128]

Bluetooth stats:

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
1: asus-wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
2: asus-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no

What didn't work?

Wi-Fi works well, but bluetooth didn't show in the menu and can't work.

What did you try?

I have tried :

sudo ./install https://github.com/neurobin/MT7630E/wiki/Get-bluetooth-working-in-Linux-kernel--with-mt7630e
sudo make dkms KERNEL=4.4.0-21-generic https://github.com/neurobin/MT7630E/wiki/Get-bluetooth-working-in-Linux-kernel--with-mt7630e After applying the wiki's steps, nothing change.

Error code:

when doing this command make M=drivers/bluetooth/ modules there is a warning show up: WARNING: "kstrtobool" [drivers/bluetooth//btmrvl.ko] undefined!

Additional info

lsusb output

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 0e8d:763f MediaTek Inc. 
Bus 001 Device 003: ID 04f2:b483 Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lspci -vv outputs


00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
Subsystem: ASUSTeK Computer Inc. Broadwell-U Host Bridge -OPI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: bdw_uncore

00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Broadwell-U Integrated Graphics Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Region 0: Memory at 99000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5000 [size=64] Expansion ROM at [disabled] Capabilities: Kernel driver in use: i915 Kernel modules: i915

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) Subsystem: ASUSTeK Computer Inc. Broadwell-U Audio Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 53 Region 0: Memory at 9b31c000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel

00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09) Subsystem: ASUSTeK Computer Inc. Broadwell-U Processor Thermal Subsystem Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 9b310000 (64-bit, non-prefetchable) [size=32K] Capabilities: Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device

00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP USB xHCI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at 9b300000 (64-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP MEI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 51 Region 0: Memory at 9b324000 (64-bit, non-prefetchable) [size=32] Capabilities: Kernel driver in use: mei_me Kernel modules: mei_me

00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP High Definition Audio Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 52 Region 0: Memory at 9b318000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 43 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 9b200000-9b2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 44 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: 9b100000-9b1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 9a000000-9b0fffff Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP LPC Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Capabilities: Kernel driver in use: lpc_ich Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP SATA Controller [AHCI Mode] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 47 Region 0: I/O ports at 50b0 [size=8] Region 1: I/O ports at 50a0 [size=4] Region 2: I/O ports at 5090 [size=8] Region 3: I/O ports at 5080 [size=4] Region 4: I/O ports at 5060 [size=32] Region 5: Memory at 9b322000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP SMBus Controller Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 255 Region 0: Memory at 9b321000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 5040 [size=32] Kernel modules: i2c_i801

00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Wildcat Point-LP Thermal Management Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at 9b320000 (64-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10) Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at 9b204000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at 9b200000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 Kernel modules: r8169

03:00.0 Network controller: MEDIATEK Corp. MT7630e 802.11bgn Wireless Network Adapter Subsystem: Foxconn International, Inc. MT7630e 802.11bgn Wireless Network Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at 9b100000 (32-bit, non-prefetchable) [size=1M] Capabilities: Kernel driver in use: mt7630e Kernel modules: mt7630e

04:00.0 3D controller: NVIDIA Corporation GK208M [GeForce 920M] (rev a1) Subsystem: ASUSTeK Computer Inc. GK208M [GeForce 920M] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at 9a000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at c0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 3000 [size=128] Expansion ROM at 9b000000 [disabled] [size=512K] Capabilities: Kernel driver in use: nouveau Kernel modules: nvidiafb, nouveau

neurobin / MT7630E