search

night-ghost / ardupilot

ArduPlane, ArduCopter, ArduRover source
http://ardupilot.org/
GNU General Public License v3.0
25 stars 5 forks source link

Baro / Altidude doesn't show up as active in MP (board Omnibus F4 V3) (Copter-mode) #19

Open diadem56 opened 6 years ago

diadem56 commented 6 years ago

Issue details

If I load the latest dfu-file from the latest zip folder from the copter folder (f4light_AirbotV2_bl.dfu : 930 KB) in MP baro/altitude isnt't active (it appears just a fixed number (e.g. 21.07), also when I raise the board).

If I load the latest dfu-file from the latest zip folder from the plane folder (f4light_AirbotV2_bl.dfu : 940 KB - 10 KB more) in MP baro/altitude works well without issues (shows correct chanings in altitude) .

borard

Omnibus F4 V3

Platform

[ ] Copter (issue) [ ] Plane (works)

Thanks for any solution

night-ghost commented 6 years ago

what shows absolute pressure (Status tab)?

diadem56 commented 6 years ago

the board loaded with the copter firmware: press_abs: 927.091 (stays static also when I rise the board)

the board loaded with the plane firmware: perss_abs: 231.81 (moves when I rise the bord)

night-ghost commented 6 years ago

I don't have such board but there is no any problems on Matek F405-CTR with the same baro

baro