Open ForrestErickson opened 1 month ago
Note the exact text on the schematic for the switches has a "-" which is not a character that can be used in a variable name. Example: S1-morseCodeDanger1 So change to S1_morseCodeDanger1
In future use only upper case letters and numbers and underscore for net names which will be referenced in firmware.
During the process of transferring the PMD into a Krake, the switches and the LED were renamed.
PMD inherrited MUTE_BUTTON_PIN = 36; // GPIO 36 for the mute button from Krake
Is your feature request related to a problem? Please describe. A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] The name of GPIO pins on the schematic and PCB should match the naming in firmware. Names should reflect function.
However for example S1 is called "S1-morseCodeDanger1" on the schematic and PCB and connected to GPIO36
But in the firmware is const int MUTE_BUTTON_PIN = 36; // GPIO 36 for the mute button
These names are inconsistent. In all firmware other pins and pin names should be reviewed and corrected where errors are found.
Describe the solution you'd like A clear and concise description of what you want to happen.
Change in all firmware to reflect the actual name on the schematic and PCB (and / or possibly Krake)