search

open-traffic-generator / snappi-ixnetwork

The Keysight IxNetwork implementation of the open-traffic-generator models.
MIT License
17 stars 11 forks source link

get_capture returns only data capture #497

Open dgalan-xxia opened 2 years ago

dgalan-xxia commented 2 years ago

Version information snappi-ixnetwork 0.7.5

Describe the bug Enable capture now enables both data and control capture but get_capturereturns only data capture

                    request = api.capture_request()
                    request.port_name = "SR Port 1"
                    pcap_bytes = api.get_capture(request)
ANISH-GOTTAPU commented 2 years ago

@dgalan-xxia : Both captures worked for me, tested on 9.10 with Novus-100G. Control Capture tested with only Control packets without Data Traffic

Since you didn't have any packets in the request, I am suspecting a timing issue. If the below tests work with your hardware, try adding some sleep.

Control Capture Test:

import snappi
import dpkt
import time

def test_control_capture(api):
    """
    The test is to check if capture has control packets included.

    Validation: packet captures should have bgp packets
    """
    api = snappi.api(location="https://127.0.0.1", ext="ixnetwork")
    config = api.config()

    tx, rx = config.ports.port(
        name="tx", location="otg-novus100g.lbj.is.keysight.com;1;5"
    ).port(name="rx", location="otg-novus100g.lbj.is.keysight.com;1;6")

    config.options.port_options.location_preemption = True
    ly = config.layer1.layer1()[-1]
    ly.name = "ly"
    ly.port_names = [tx.name, rx.name]
    ly.ieee_media_defaults = False
    ly.auto_negotiate = False
    ly.speed = "speed_100_gbps"
    ly.media = "fiber"

    cap = config.captures.capture(name="c1")[-1]
    cap.port_names = [rx.name]
    cap.format = cap.PCAP

    tx_device, rx_device = config.devices.device(name="d1").device(name="d2")

    # tx_device config
    tx_eth = tx_device.ethernets.add()
    tx_eth.port_name = tx.name
    tx_eth.name = "tx_eth"
    tx_eth.mac = "00:00:00:00:00:aa"
    tx_ipv4 = tx_eth.ipv4_addresses.add()
    tx_ipv4.name = "tx_ipv4"
    tx_ipv4.address = "21.1.1.2"
    tx_ipv4.prefix = 24
    tx_ipv4.gateway = "21.1.1.1"
    tx_bgpv4 = tx_device.bgp
    tx_bgpv4.router_id = "192.0.0.1"
    tx_bgpv4_int = tx_bgpv4.ipv4_interfaces.add()
    tx_bgpv4_int.ipv4_name = tx_ipv4.name
    tx_bgpv4_peer = tx_bgpv4_int.peers.add()
    tx_bgpv4_peer.name = "tx_bgpv4"
    tx_bgpv4_peer.as_type = "ebgp"
    tx_bgpv4_peer.peer_address = "21.1.1.1"
    tx_bgpv4_peer.as_number = 65201

    # rx_device config
    rx_eth = rx_device.ethernets.add()
    rx_eth.port_name = rx.name
    rx_eth.name = "rx_eth"
    rx_eth.mac = "00:00:00:00:00:bb"
    rx_ipv4 = rx_eth.ipv4_addresses.add()
    rx_ipv4.name = "rx_ipv4"
    rx_ipv4.address = "21.1.1.1"
    rx_ipv4.prefix = 24
    rx_ipv4.gateway = "21.1.1.2"
    rx_bgpv4 = rx_device.bgp
    rx_bgpv4.router_id = "192.0.0.2"
    rx_bgpv4_int = rx_bgpv4.ipv4_interfaces.add()
    rx_bgpv4_int.ipv4_name = rx_ipv4.name
    rx_bgpv4_peer = rx_bgpv4_int.peers.add()
    rx_bgpv4_peer.name = "rx_bgpv4"
    rx_bgpv4_peer.as_type = "ebgp"
    rx_bgpv4_peer.peer_address = "21.1.1.2"
    rx_bgpv4_peer.as_number = 65200

    api.set_config(config)
    time.sleep(10)

    cs = api.capture_state()
    cs.state = cs.START
    api.set_capture_state(cs)

    print("Starting all protocols ...")
    ps = api.protocol_state()
    ps.state = ps.START
    api.set_protocol_state(ps)
    time.sleep(5)

    request = api.capture_request()
    request.port_name = "rx"
    pcap_bytes = api.get_capture(request)

    bgp_pkts = []
    for _, pkt in dpkt.pcap.Reader(pcap_bytes):
        eth = dpkt.ethernet.Ethernet(pkt)
        if getattr(eth.data, "tcp", None) is not None:
            if eth.data.tcp.sport == 179:
                bgp_pkts.append(eth.data)

    print(len(bgp_pkts))
    assert len(bgp_pkts) > 0

    print("Stop all protocols ...")
    ps = api.protocol_state()
    ps.state = ps.STOP
    api.set_protocol_state(ps)

Data Capture Test:


import snappi
import dpkt
import time

def test_data_capture(api):
    """
    The test is to check if capture has data packets included.

    Validation: packet captures should have packets with dst route range
                200.1.1.1
    """
    api = snappi.api(location="https://127.0.0.1", ext="ixnetwork")
    config = api.config()

    tx, rx = config.ports.port(
        name="tx", location="otg-novus100g.lbj.is.keysight.com;1;5"
    ).port(name="rx", location="otg-novus100g.lbj.is.keysight.com;1;6")

    config.options.port_options.location_preemption = True
    ly = config.layer1.layer1()[-1]
    ly.name = "ly"
    ly.port_names = [tx.name, rx.name]
    ly.ieee_media_defaults = False
    ly.auto_negotiate = False
    ly.speed = "speed_100_gbps"
    ly.media = "fiber"

    cap = config.captures.capture(name="c1")[-1]
    cap.port_names = [rx.name]
    cap.format = cap.PCAP

    tx_device, rx_device = config.devices.device(name="d1").device(name="d2")

    # tx_device config
    tx_eth = tx_device.ethernets.add()
    tx_eth.port_name = tx.name
    tx_eth.name = "tx_eth"
    tx_eth.mac = "00:00:00:00:00:aa"
    tx_ipv4 = tx_eth.ipv4_addresses.add()
    tx_ipv4.name = "tx_ipv4"
    tx_ipv4.address = "21.1.1.2"
    tx_ipv4.prefix = 24
    tx_ipv4.gateway = "21.1.1.1"
    tx_bgpv4 = tx_device.bgp
    tx_bgpv4.router_id = "192.0.0.1"
    tx_bgpv4_int = tx_bgpv4.ipv4_interfaces.add()
    tx_bgpv4_int.ipv4_name = tx_ipv4.name
    tx_bgpv4_peer = tx_bgpv4_int.peers.add()
    tx_bgpv4_peer.name = "tx_bgpv4"
    tx_bgpv4_peer.as_type = "ebgp"
    tx_bgpv4_peer.peer_address = "21.1.1.1"
    tx_bgpv4_peer.as_number = 65201
    tx_rr = tx_bgpv4_peer.v4_routes.add(name="tx_rr")
    tx_rr.addresses.add(address="100.1.1.1", prefix=32, count=1)

    # rx_device config
    rx_eth = rx_device.ethernets.add()
    rx_eth.port_name = rx.name
    rx_eth.name = "rx_eth"
    rx_eth.mac = "00:00:00:00:00:bb"
    rx_ipv4 = rx_eth.ipv4_addresses.add()
    rx_ipv4.name = "rx_ipv4"
    rx_ipv4.address = "21.1.1.1"
    rx_ipv4.prefix = 24
    rx_ipv4.gateway = "21.1.1.2"
    rx_bgpv4 = rx_device.bgp
    rx_bgpv4.router_id = "192.0.0.2"
    rx_bgpv4_int = rx_bgpv4.ipv4_interfaces.add()
    rx_bgpv4_int.ipv4_name = rx_ipv4.name
    rx_bgpv4_peer = rx_bgpv4_int.peers.add()
    rx_bgpv4_peer.name = "rx_bgpv4"
    rx_bgpv4_peer.as_type = "ebgp"
    rx_bgpv4_peer.peer_address = "21.1.1.2"
    rx_bgpv4_peer.as_number = 65200
    rx_rr = rx_bgpv4_peer.v4_routes.add(name="rx_rr")
    rx_rr.addresses.add(address="200.1.1.1", prefix=32, count=1)

    # flow config
    flow = config.flows.flow(name="flow1")[-1]

    flow.tx_rx.device.tx_names = [tx_rr.name]
    flow.tx_rx.device.rx_names = [rx_rr.name]

    flow.size.fixed = 1024
    flow.rate.percentage = 10
    flow.duration.fixed_packets.packets = 10
    flow.metrics.enable = True

    api.set_config(config)
    time.sleep(10)

    cs = api.capture_state()
    cs.state = cs.START
    api.set_capture_state(cs)

    print("Starting all protocols ...")
    ps = api.protocol_state()
    ps.state = ps.START
    api.set_protocol_state(ps)
    time.sleep(5)

    print("Starting transmit on all flows ...")
    ts = api.transmit_state()
    ts.state = ts.START
    api.set_transmit_state(ts)
    time.sleep(5)

    request = api.capture_request()
    request.port_name = "rx"
    pcap_bytes = api.get_capture(request)

    data_pkts = []
    for _, pkt in dpkt.pcap.Reader(pcap_bytes):
        eth = dpkt.ethernet.Ethernet(pkt)
        if isinstance(eth.data, dpkt.ip.IP):
            # b'\xc8\x01\x01\x01' is 200.1.1.1
            if eth.ip.dst == b"\xc8\x01\x01\x01":
                data_pkts.append(eth.data)

    print(len(data_pkts))
    assert len(data_pkts) == 10

    print("Stop all protocols ...")
    ps = api.protocol_state()
    ps.state = ps.STOP
    api.set_protocol_state(ps)```
dgalan-xxia commented 2 years ago

Running with Novus 9.20. I will raise the issue with IxNetwork team as it seems that when the data capture is empty, the merged one is also empty (I manually downloaded all 3 captures).

ANISH-GOTTAPU commented 2 years ago

Same issue as #487

ANISH-GOTTAPU commented 2 years ago

@ASHNA-AGGARWAL-KEYSIGHT : can you please check with 9.20 and see if both cap and pcap works