search

openFyde / overlay-rock5b-openfyde

openFyde supported hardware RADXA Rock5 Model B build artefacts and pre-built image releases.
BSD 3-Clause "New" or "Revised" License
33 stars 3 forks source link

R114: No display output on HDMI #24

Open jessicah opened 11 months ago

jessicah commented 11 months ago

Tried both HDMI ports, no luck. I had tried FydeOS previously, and that worked fine, but needs a newer Android, so tried this, but no good :-/

Serial debug output:

LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
Manufacturer ID:0x6
CH0 RX Vref:28.7%, TX Vref:24.8%,24.8%
CH1 RX Vref:28.7%, TX Vref:23.8%,24.8%
CH2 RX Vref:29.7%, TX Vref:23.8%,24.8%
CH3 RX Vref:29.7%, TX Vref:24.8%,24.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-499-ge63a16361:derrick.huang
NOTICE:  BL31: Built : 10:58:38, Jan 10 2023
INFO:    spec: 0x1
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

U-Boot 2017.09-g6a2c0dfaf5ee-230203 #damenly (Apr 23 2023 - 15:51:48 +0800)

Model: Radxa ROCK 5B
PreSerial: 2, raw, 0xfeb50000
DRAM:  15.7 GiB
Sysmem: init
Relocation Offset: eda44000
Relocation fdt: eb9f9b18 - eb9fecc0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
No misc partition
boot mode: None
FIT: No boot partition
No resource partition
No resource partition
Failed to load DTB, ret=-19
No find valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
Model: Radxa ROCK 5B
rockchip_set_serialno: could not find efuse/otp device
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 24000 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 24000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x1
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x1
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x1
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe Linking... LTSSM is 0x0
pcie@fe150000: PCIe-0 Link Fail

Device 0: unknown device
MMC: no card present
mmc_init: -123, time 1
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:c...
Found U-Boot script /boot/boot.scr.uimg
reading /boot/boot.scr.uimg
3426 bytes read in 1 ms (3.3 MiB/s)
## Executing script at 00500000
Boot script loaded from mmc 0:3
distro_bootpart: c
prefix: /boot/
27570688 bytes read in 157 ms (167.5 MiB/s)
251739 bytes read in 14 ms (17.1 MiB/s)
** File not found /boot//rockchip/overlay/fixup.scr **
Fdt Ramdisk skip relocation
No misc partition
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
   reserving fdt memory region: addr=8300000 size=a3000
  'reserved-memory' cma: addr=10000000 size=10000000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 00000000083a5fff
can't get otp device, ret=-19
Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
Adding bank: 0x100000000 - 0x3fc000000 (size: 0x2fc000000)
Adding bank: 0x3fc500000 - 0x3fff00000 (size: 0x03a00000)
Total: 1183.297 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.110-fyde (openfyde@fydexplorer) (Chromium OS 16.0_pre484197_p20230405-r7 clang version 16.0.0 (/var/tmp/portage/sys-devel/llvm-16.0_pre484197_p20230405-r7/work/llvm-16.0_pre484197_p20230405/clang 2916b99182752b1aece8cc4479d8d6a20b5e02da), LLD 16.0.0) #1 SMP PREEMPT Wed Jul 12 19:55:45 UTC 2023
[    0.000000] Machine model: Radxa ROCK 5B
[    0.000000] efi: UEFI not found.
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] Reserved memory: bypass cma node, using cmdline CMA params instead
[    0.000000] OF: reserved mem: node cma compatible matching fail
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003ffefffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003fbffffff]
[    0.000000]   node   0: [mem 0x00000003fc500000-0x00000003ffefffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000003ffefffff]
[    0.000000] On node 0, zone Normal: 256 pages in unavailable ranges
[    0.000000] cma: Reserved 64 MiB at 0x00000000ec000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 32 pages/cpu s93544 r8192 d29336 u131072
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: patching kernel code
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4062220
[    0.000000] Kernel command line: rootwait ro cros_debug cros_secure cros_legacy console=ttyS2,1500000n8 root=PARTUUID=64c614cd-afb8-f54a-92e1-af2f52710820 cma=64M usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000e8000000-0x00000000ec000000] (64MB)
[    0.000000] Memory: 16030472K/16506880K available (15360K kernel code, 2732K rwdata, 6928K rodata, 1792K init, 596K bss, 410872K reserved, 65536K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x450 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 53414 entries in 209 pages
[    0.000000] ftrace: allocated 209 pages with 4 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    0.000000] ITS [mem 0xfe640000-0xfe65ffff]
[    0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @100190000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001a0000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS [mem 0xfe660000-0xfe67ffff]
[    0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @1001c0000 (indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @1001d0000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000001001e0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000001001f0000
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001166] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.001181] pid_max: default: 32768 minimum: 301
[    0.001291] LSM: Security Framework initializing
[    0.001335] Yama: becoming mindful.
[    0.001353] LoadPin: ready to pin (currently not enforcing)
[    0.001374] Chromium OS LSM: enabled
[    0.001377] SELinux:  Initializing.
[    0.001503] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.001537] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.003182] rcu: Hierarchical SRCU implementation.
[    0.003504] Platform MSI: msi-controller@fe640000 domain created
[    0.003522] Platform MSI: msi-controller@fe660000 domain created
[    0.003859] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    0.003878] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    0.004091] EFI services will not be available.
[    0.004473] smp: Bringing up secondary CPUs ...
[    0.004972] Detected VIPT I-cache on CPU1
[    0.004996] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    0.005011] GICv3: CPU1: using allocated LPI pending table @0x0000000100200000
[    0.005051] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.005590] Detected VIPT I-cache on CPU2
[    0.005610] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    0.005623] GICv3: CPU2: using allocated LPI pending table @0x0000000100210000
[    0.005660] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.006179] Detected VIPT I-cache on CPU3
[    0.006197] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    0.006209] GICv3: CPU3: using allocated LPI pending table @0x0000000100220000
[    0.006243] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.006795] CPU features: detected: Spectre-v4
[    0.006797] CPU features: detected: Spectre-BHB
[    0.006799] Detected PIPT I-cache on CPU4
[    0.006810] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    0.006817] GICv3: CPU4: using allocated LPI pending table @0x0000000100230000
[    0.006839] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    0.007322] Detected PIPT I-cache on CPU5
[    0.007333] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    0.007340] GICv3: CPU5: using allocated LPI pending table @0x0000000100240000
[    0.007363] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    0.007834] Detected PIPT I-cache on CPU6
[    0.007844] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    0.007851] GICv3: CPU6: using allocated LPI pending table @0x0000000100250000
[    0.007874] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    0.008350] Detected PIPT I-cache on CPU7
[    0.008361] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    0.008368]tered new interface driver cdc_acm
[    0.462229] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adaptert registered for Keyspan 1 port adapter
[    0.462575] usbserial: USB Serial support registered for Keyspan 2 port adapter
                                                                                  [    0.510598] rtc-hym8563 6-0051: registered as rtc0
[    0.511599] rtc-hym8563 6-0051: setting system clock to 2021-01-0dc: tsadc is probed successfully!
[    0.517260] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    0.517362] device-mapper: verity-chromeos: dm-verity-chromeos registered
[    0.517910] cpu cpu0: bin=0
[    0.518082] cpu cpu0: leakage=17
[    0.519488] cpu cpu0: pvtm=1521
[    0.519550] cpu cpu0: pvtm-volt-sel=5
[    0.521430] cpu cpu4: bin=0
[    0.521600] cpu cpu4: leakage=15
[    0.525393] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    0.528037] cpu cpu4: pvtm=1766
[    0.531939] cpu cpu4: pvtm-volt-sel=6
[    0.534568] cpu cpu6: bin=0
[    0.534738] cpu cpu6: leakage=15
[    0.535387] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    0.541193] cpu cpu6: pvtm=1770
[    0.545114] cpu cpu6: pvtm-volt-sel=6
[    0.546638] cpu cpu0: avs=0
[    0.547272] cpu cpu4: avs=0
[    0.547886] cpu cpu6: avs=0
[    0.548092] cpu cpu0: EM: created perf domain
[    0.548124] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    0.548766] cpu cpu4: EM: created perf domain
[    0.548790] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    0.552046] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    0.562044] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[    0.562928] cpu cpu6: EM: created perf domain
[    0.563131] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    0.575381] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    0.578546] sdhci: Secure Digital Host Controller Interface driver
[    0.578556] sdhci: Copyright(c) Pierre Ossman
[    0.578561] Synopsys Designware Multimedia Card Interface Driver
[    0.579164] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.579231] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.
[    0.579245] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.
[    0.579249] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a
[    0.579263] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 77,32 bit host data width,256 deep fifo
[    0.579411] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq
[    0.579415] mmc_host mmc2: card is non-removable.
[    0.579628] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    0.579651] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    0.579659] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    0.579687] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
[    0.580277] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    0.580329] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[    0.580687] hid: raw HID events driver (C) Jiri Kosina
[    0.580942] usbcore: registered new interface driver usbhid
[    0.580949] usbhid: USB HID core driver
[    0.581182] ashmem: initialized
[    0.584705] optee: probing for conduit method.
[    0.584715] optee: api uid mismatch
[    0.584724] optee: probe of firmware:optee failed with error -22
[    0.585245] usbcore: registered new interface driver snd-usb-audio
[    0.592050] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    0.592092] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    0.592553] input: rockchip-HDMI0 HDMI/DP as /devices/platform/hdmi0-sound/sound/card0/input2
[    0.593804] input: rockchip-HDMI1 HDMI/DP as /devices/platform/hdmi1-sound/sound/card1/input3
[    0.594147] debugfs: File 'Capture' in directory 'dapm' already present!
[    0.594716] input: TYPEC-HDMI HDMI/DP as /devices/platform/dp0-sound/sound/card2/input4
[    0.595532] input: headset-keys as /devices/platform/es8316-sound/input/input5
[    0.595717] rk-multicodecs es8316-sound: ASoC: Property 'rockchip,audio-routing' does not exist or its length is not even
[    0.595725] rk-mul:       IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[    0.761791] rk-pcie fe190000.pcie:      MEM 0x00f4200000..0x00f4ffarent 'vdd_npu_s0' already present!
[    0.773482] RKNPU fdab0000.npu: pvtm=927
[    0.777833] RKNPU fdab0000.npu: pvtm-vole system using the ext4 subsystem
[    0.791413] EXT4-fs (mmcblk0p3): mounted filesystem without journal. Opts: (null)
[
  [    0.822303] Run /sbin/init as init process
[    0.901909] SELinux:  Permission nlmsg_getneigh in class netlink_route_socket not defined in policy.
[    0.902047] SELinux:  Permission perfmon in class capability2 not defined in policy.
[    0.902055] SELinux:  Permission bpf in class capability2 not defined in policy.
[    0.902061] SELinux:  Permission checkpoint_restore in class capability2 not defined in policy.
[    0.902087] SELinux:  Permission perfmon in class cap2_userns not defined in policy.
[    0.902093] SELinux:  Permission bpf in class cap2_userns not defined in policy.
[    0.902099] SELinux:  Permission checkpoint_restore in class cap2_userns not defined in policy.
[    0.902214] SELinux:  Class anon_inode not defined in policy.
[    0.902221] SELinux: the above unknown classes and permissions will be denied
[    0.908992] SELinux:  policy capability network_peer_controls=1
[    0.909019] SELinux:  policy capability open_perms=1
[    0.909026] SELinux:  policy capability extended_socket_class=1
[    0.909032] SELinux:  policy capability always_check_network=0
[    0.909038] SELinux:  policy capability cgroup_seclabel=0
[    0.909044] SELinux:  policy capability nnp_nosuid_transition=1
[    0.909050] SELinux:  policy capability genfs_seclabel_symlinks=0
[    0.909057] SELinux:  policy capability ioctl_skip_cloexec=0
[    0.932173] usb 4-1: new full-speed USB device number 2 using ohci-platform
[    0.995631] audit: type=1403 audit(1609502400.983:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[    1.022073] rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x130011
[    1.022303] rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40
[    1.022317] pci_bus 0004:40: root bus resource [bus 40-4f]
[    1.022326] pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
[    1.022335] pci_bus 0004:40: root bus resource [io  0x200000-0x2fffff] (bus address [0xf4100000-0xf41fffff])
[    1.022344] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
[    1.022353] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref]
[    1.022398] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
[    1.022420] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    1.022482] pci 0004:40:00.0: supports D1 D2
[    1.022490] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
[    1.030956] pci 0004:40:00.0: Primary bus is hard wired to 0
[    1.031002] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    1.031244] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000
[    1.031312] pci 0004:41:00.0: reg 0x10: [io  0x0000-0x00ff]
[    1.031393] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[    1.031437] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[    1.031826] pci 0004:41:00.0: supports D1 D2
[    1.031837] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.048564] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
[    1.048615] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
[    1.048629] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
[    1.048640] pci 0004:40:00.0: BAR 7: assigned [io  0x200000-0x200fff]
[    1.048653] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
[    1.048691] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
[    1.048835] pci 0004:41:00.0: BAR 0: assigned [io  0x200000-0x2000ff]
[    1.048854] pci 0004:40:00.0: PCI bridge to [bus 41]
[    1.048862] pci 0004:40:00.0:   bridge window [io  0x200000-0x200fff]
[    1.048892] pci 0004:40:00.0:   bridge window [mem 0xf4200000-0xf42fffff]
[    1.051477] pcieport 0004:40:00.0: PME: Signaling with IRQ 142
[    1.051993] pcieport 0004:40:00.0: AER: enabled with IRQ 143
[    1.114697] audit: type=1400 audit(1609502401.100:3): avc:  granted  { execute } for  pid=252 comm="sh" name="crash_reporter" dev="mmcblk0p3" ino=2768 scontext=u:r:cros_init_scripts:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
[    1.142791] usb 4-1: New USB device found, idVendor=27c6, idProduct=0818, bcdDevice= 1.33
[    1.142828] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.142837] usb 4-1: Product: TouchScreen
[    1.142845] usb 4-1: Manufacturer: WingCool Inc.
[    1.152938] input: WingCool Inc. TouchScreen as /devices/platform/fc8c0000.usb/usb4/4-1/4-1:1.0/0003:27C6:0818.0001/input/input7
[    1.209224] hid-multitouch 0003:27C6:0818.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [WingCool Inc. TouchScreen] on usb-fc8c0000.usb-1/input0
[    1.213419] hid-generic 0003:27C6:0818.0002: hidraw1: USB HID v1.10 Device [WingCool Inc. TouchScreen] on usb-fc8c0000.usb-1/input1
[    1.279686] LoadPin: mmcblk0p3 (179:3): writable
[    1.279717] LoadPin: enforcement can be disabled.
[    1.279730] LoadPin: kernel-module pinned obj="/lib/modules/5.10.110-fyde/kernel/lib/lz4/lz4_decompress.ko" pid=263 cmdline="/sbin/modprobe -q -- fs-squashfs"
[    1.284806] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.286537] Registered swp emulation handler
[    1.334083] udevd[270]: starting version 225
[    1.336779] EXT4-fs (mmcblk0p1): recovery complete
[    1.337304] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,discard
[    1.340324] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
[    1.367692] EXT4-fs (mmcblk0p1): re-mounted. Opts:
[    1.468534] EXT4-fs (loop1): warning: mounting unchecked fs, running e2fsck is recommended
[    1.471260] EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
[    1.478464] tpm tpm0: A TPM error (256) occurred attempting the self test
[    1.478474] tpm tpm0: starting up the TPM manually
[    1.703955] EXT4-fs (dm-0): 2 orphan inodes deleted
[    1.704000] EXT4-fs (dm-0): recovery complete
[    1.715468] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard,commit=600
[    1.809101] encrypted-reboo (pid 502) is setting deprecated v1 encryption policy; recommend upgrading to v2.
[    1.812471] audit: type=1400 audit(1671408000.536:4): avc:  granted  { execute } for  pid=503 comm="chromeos_startu" name="crash_reporter" dev="mmcblk0p3" ino=2768 scontext=u:r:chromeos_startup:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
[    1.978248] frecon[470]: Frecon using drm driver rockchip, version 3.0, date(20140818), desc(RockChip Soc DRM)
[    2.169721] EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,resgid=20119,commit=600
[    2.236156] low_mem: threshold[0] 817 MB
[    2.236178] low_mem: threshold[1] 6288 MB
[    2.240123] init: ureadahead main process (545) terminated with status 5
[    2.249222] zram: Added device: zram0
[    2.296593] zram0: detected capacity change from 0 to 32195600384
[    2.325403] Adding 31441012k swap on /dev/zram0.  Priority:-2 extents:1 across:31441012k SS
[    2.359616] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    2.359681] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1024x600p60, type: 11(if:1000) for vp1 dclk: 51210000
[    2.360267] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 0 dclk_core1 div: 2
[    2.360301] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx_ropll_cmn_config bus_width:7d064 rate:512100
[    2.360588] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy pll locked!
[    2.360598] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 51210000, get 51210000
[    2.360639] dwhdmi-rockchip fdea0000.hdmi: final tmdsclk = 51210000
[    2.360717] dwhdmi-rockchip fdea0000.hdmi: don't use dsc mode
[    2.360725] dwhdmi-rockchip fdea0000.hdmi: dw hdmi qp use tmds mode
[    2.360735] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: bus_width:0x7d064,bit_rate:512100
[    2.365923] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy lane can't ready!
[    2.365936] phy phy-fed70000.hdmiphy.8: phy poweron failed --> -22
[    2.422152] dwhdmi-rockchip fdea0000.hdmi: dw_hdmi_qp_setup hdmi set operation mode failed
[    2.422218] dwhdmi-rockchip fdea0000.hdmi: Rate 51210000 missing; compute N dynamically
[    2.666811] init: daisydog main process (825) terminated with status 251
[    2.666853] init: daisydog main process ended, respawning
[    2.672578] r8169 0004:41:00.0: enabling device (0000 -> 0003)
[    2.705334] init: daisydog main process (856) terminated with status 251
[    2.705402] init: daisydog main process ended, respawning
[    2.717796] r8169 0004:41:00.0 eth0: RTL8125B, 00:e0:4c:68:00:8c, XID 641, IRQ 144
[    2.717806] r8169 0004:41:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.736065] init: daisydog main process (901) terminated with status 251
[    2.736125] init: daisydog main process ended, respawning
[    2.743149] Bluetooth: Core ver 2.22
[    2.743222] NET: Registered protocol family 31
[    2.743226] Bluetooth: HCI device and connection manager initialized
[    2.743231] Bluetooth: HCI socket layer initialized
[    2.743236] Bluetooth: L2CAP socket layer initialized
[    2.743244] Bluetooth: SCO socket layer initialized
[    2.754499] init: daisydog main process (931) terminated with status 251
[    2.754516] init: daisydog main process ended, respawning
[    2.768561] init: daisydog main process (948) terminated with status 251
[    2.768579] init: daisydog main process ended, respawning
[    2.814579] init: daisydog main process (1005) terminated with status 251
[    2.814636] init: daisydog main process ended, respawning
[    2.816018] frecon[470]: Frecon using drm driver rockchip, version 3.0, date(20140818), desc(RockChip Soc DRM)
[    2.852692] init: daisydog main process (1079) terminated with status 251
[    2.852711] init: daisydog main process ended, respawning
[    2.879032] init: daisydog main process (1104) terminated with status 251
[    2.879049] init: daisydog main process ended, respawning
[    2.894300] init: daisydog main process (1117) terminated with status 251
[    2.894353] init: daisydog main process ended, respawning
[    2.912216] init: daisydog main process (1137) terminated with status 251
[    2.912271] init: daisydog main process ended, respawning
[    2.958710] RTL8226B_RTL8221B 2.5Gbps PHY r8169-4-4100:00: attached PHY driver [RTL8226B_RTL8221B 2.5Gbps PHY] (mii_bus:phy_addr=r8169-4-4100:00, irq=IGNORE)
[    3.142279] r8169 0004:41:00.0 eth0: Link is Down
[    3.146552] init: daisydog main process (1157) terminated with status 251
[    3.146595] init: daisydog respawning too fast, stopped
[    3.175454] rk-pcie fe170000.pcie: PCIe Link Fail
[    3.175482] rk-pcie fe170000.pcie: failed to initialize host
[    3.195489] rk-pcie fe150000.pcie: PCIe Link Fail
[    3.195500] rk-pcie fe150000.pcie: failed to initialize host

      fffffffffffff
    ff:::::::::::::ff                               ddddddd
   f::::::ffffff::ff                                d:::::d                                 OOOOOOOOO               SSSSSSSSSSSSS
  f::::::f      ff                                  d:::::d                             OO::::::::::::OO          SS:::::::::::::SSS
  f:::::f                                           d:::::d                           OO::::OOOOOOOOO::::OO      S:::::SSSSSSSS:::::SS
  f:::::f                                           d:::::d                         O:::::O           O:::::O   S:::::S        SSSSSSS
ff::::::ffffffff  yyyyyyy           yyyyyyy  dddddd d:::::d     eeeeeeeeee        O:::::O               O:::::O S::::S
f:::::::::::::::f  y:::::y         y:::::yddd::::::d::::::d  eee::eeeeeee::eee   O:::::O                 O:::::OS:::::S
ff:::::::fffffffff  yyyyyyy       y:::::yd:::::ddddd::::::d e::::e       e::::e O:::::O                   O:::::OS:::::SSSSS
  f:::::f                        y:::::yd::::d      d:::::de:::e          e:::eO:::::O                     O:::::OSSS:::::::SSSSS
  f:::::f             y:::::y   y:::::yd::::d       d:::::de::::eeeeeeeeee::::eO:::::O                     O:::::O   SSS:::::::::SS
  f:::::f              y:::::y y:::::yd::::d        d:::::de:::::::::::::::::e O:::::O                     O:::::O      SSSSSSS:::::S
  f:::::f               y:::::y:::::y d::::d        d:::::de::::eeeeeeeeeeeee   O:::::O                   O:::::O              S:::::S
  f:::::f                y:::::::::y  d:::::d       d:::::de:::e                 O:::::O                 O:::::O                S:::::S
  f:::::f                 y:::::::y    dd::::d      d:::::de::::e         eeeee   O:::::O               O:::::O SSSSSSS         S:::::S
  f:::::f                  y:::::y       d::::dddddd::::::d e::::e       e:::e      O:::::O           O:::::O   S::::::S       S::::::S
  f:::::f                 y:::::y         ddd::::::d::::::d  eee::eeeeeee:eee         OO::::OOOOOOOOO::::OO      S::::::SSSSSSS:::::SS
  fffffff                y:::::y             dddddd ddddddd     eeeeeeeeee              OO::::::::::::OO          SSS:::::::::::::SSS
                        y:::::y                                                             OOOOOOOOO                SSSSSSSSSSSSS
                       y:::::y
                      y:::::y
                       y:::y
                        yyy

V17 Nostalgic Reflections
_______________________________________________________________________________________________________________________________________

Welcome to the FydeOS console, we hope you know what you are doing!

> To get help, visit: https://fydeos.io/help

> To return to the browser, press:

 __________     _________     _____________
|\        /|   |\       /|   |\           /|
| +------+ |   | +-----+ |   | +---------+ |
| | Ctrl | | + | | Alt | | + | | <--(F1) | |
| +------+ |   | +-----+ |   | +---------+ |
|/________\|   |/_______\|   |/___________\|

localhost login: [    4.086962] mali fb000000.gpu: Loading Mali firmware 0x1010000
[    4.087796] mali fb000000.gpu: Mali firmware git_sha: e6cfd856a9b143e1ab6657328e8b5ffc44a623f9
[    5.638987] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    5.644943] dwhdmi-rockchip fdea0000.hdmi: use tmds mode
[    6.044363] r8169 0004:41:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.044436] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.106939] 8021q: 802.1Q VLAN Support v1.8
[    9.850176] EXT4-fs (mmcblk0p8): re-mounted. Opts:
[    9.864290] EXT4-fs (mmcblk0p8): re-mounted. Opts:
[    9.867764] init: failsafe-delay main process (741) killed by TERM signal
[    9.963669] fuse: init (API version 7.32)
[    9.993265] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[   10.276189] fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-ce"
[   11.580144] IPv6: ADDRCONF(NETDEV_CHANGE): arc_ns0: link becomes ready
[   11.580333] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   11.655734] init: update-engine post-start process (1493) terminated with status 1
[   11.715958] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   11.818040] init: never-suspend main process (2652) terminated with status 1
[   12.833885] dwhdmi-rockchip fdea0000.hdmi: Rate 51210000 missing; compute N dynamically
[   12.880389] new mount options do not match the existing superblock, will be ignored
[   12.880492] cgroup: Unknown subsys name 'memory'
[   12.880549] cgroup: Unknown subsys name 'schedtune'
[   13.057481] cgroup: Unknown subsys name 'schedtune'
[   13.094516] new mount options do not match the existing superblock, will be ignored
[   13.118092] [3259] lmkd: blocked syscall 434
[   13.167053] init: send-boot-elog-metrics main process (2753) terminated with status 1
[   13.665298] x_tables: ip_tables: owner match: used from hooks INPUT, but only valid from OUTPUT/POSTROUTING
[   13.667697] x_tables: ip6_tables: owner match: used from hooks INPUT, but only valid from OUTPUT/POSTROUTING
[   14.393004] [3294] main: blocked syscall 283
[   14.393542] [3295] main: blocked syscall 389
[   14.795889] [3398] Jit thread pool: blocked syscall 283
[   14.804969] [3398] Jit thread pool: blocked syscall 283
[   14.807738] [3398] Jit thread pool: blocked syscall 283
[   14.820913] [3398] Jit thread pool: blocked syscall 283
[   14.921090] [3398] Jit thread pool: blocked syscall 283
[   15.344101] [3398] Jit thread pool: blocked syscall 283
[   15.349812] [3398] Jit thread pool: blocked syscall 283
[   18.018242] init: bootlockboxd post-start process (1011) terminated with status 1
[  152.493424] init: ml-service (mojo_service) post-start process (4014) terminated with status 2
DarkevilPT commented 11 months ago

How did u flashed it ? I flashed my microsd and worked fine. Via rpi imager.

jessicah commented 11 months ago

@DarkevilPT I used balenaEtcher to eMMC.

jessicah commented 11 months ago

Hmm, it seems to be with the resolution, perhaps. My portable display only does 1024x600, although FydeOS seemed to run it at 1920x1080 weirdly. Using desktop monitor, it showed up fine... is there a way to change the resolution using the serial console?

DarkevilPT commented 11 months ago

Idk just wait for damenly to analyse this... he might know what to do.