search

openfedem / fedem-gui

Graphical user interface for FEDEM
https://openfedem.org
Apache License 2.0
0 stars 1 forks source link

Fedem-8.0.4.3 Windpower Output issue #19

Closed afolario closed 4 weeks ago

afolario commented 4 weeks ago

I run output error_1JPG output error_2JPG

I have been able to run my previous turbine model on the new version of FEDEM-8.0.4.3, and I plan to validate it against my earlier results. However, I noticed that the output does not display any results for the turbine components—only the input hub height wind speed is visible.

Even though the simulation graphics show the turbine rotating, it does not record the rotational speed of the hub. I also generated the generic 5MW turbine that comes with the installation and encountered a similar issue. I have attached some screenshots for reference.

afolario commented 4 weeks ago

I initially failed to turn on the solver options

kmokstad commented 4 weeks ago

Yes, you'll need to specify -allSecondaryVars as additional solver option for the Dynamics Solver, to ensure that these and other secondary variable quantities are saved and available for plotting in R8.0 and later. Alternatively, activate the corresponding toggles in the Results tab of the indicated Triads and Joints, to enable output of only those result quantities needed for plotting.