search

openshwprojects / BK7231GUIFlashTool

Easy to use, GUI, BK7231T/BK7231N flash tool and GPIO config extractor for beginners. Dedicated for Windows platform, but works on Linux with Mono. This tool can automatically download latest firmware (on user request) and then do a full BK backup and then write new flash cycle. This tool replaces old bkWriter 1.60 and hid_download_py.
186 stars 20 forks source link

Flashing WB2-12F development boards #23

Open MacSass opened 6 months ago

MacSass commented 6 months ago

Hello, I ordered two WB2-12F development boards, hoping I would be able to flash them with OpenBeken. This is the board: https://de.aliexpress.com/item/1005004911487557.html

Unfortunately I did not yet manage to get them flashed through USB port. I see FlashTool opening the port and get the message to "Getting Buss ...(now, please do reboot by CEN or by power off(on)" but even when I connect the board EN pin to ground, or use the on board "burn" button ... nothing else happens.

So my question is: Can those boards be flashed with OpenBeken with the FlashTool and can it be done through the build in USB port?

Thanks - MacSass

openshwprojects commented 6 months ago

You have BL602, and this tool is for BK currently. You should rather follow: https://www.elektroda.com/rtvforum/topic3889041.html

MacSass commented 6 months ago

Thanks - I saw that post, but I was hoping it was possible to flash my board through the on-board USB/Serial converter ... but that does not seem to work? The board mentioned in the post linked above is very different and does not have an on-board USB converter. I will try connecting my own serial converter to the respective PINs on my board directly to see if I can flash it that way ...