search

ottelo9 / tasmota-sml-script

Tasmota Script with SML and Google Charts for Energy/Grid meter
1 stars 0 forks source link

"Tasmota SML Script + Chart + PV.txt" reboot mit Exception:27 nach "kurzer Zeit" mit Tasmota 14.3.0 #1

Open mi-hol opened 1 day ago

mi-hol commented 1 day ago

Nach ca 2h habe ich immer wieder reboots des ESP32-C3 auf Tasmota 14.3.0

log:

00:00:00.250 CMD: Fall back to serial port, no SOF packet detected on USB port
00:00:00.250 HDW: ESP32-C3 v0.4 
00:00:00.261 UFS: FlashFS mounted with 288 kB free
00:00:00.269 CFG: Loaded from File, Count 83
00:00:00.276 QPC: Count 1
00:00:00.277 CFG: CR 401/699, Busy 0
00:00:00.278 SCR: ufilesystem found
00:00:00.305 SCR: nv=25, tv=3, vns=158, vmem=4099, smem=16384, gmem=588, tmem=21229 
00:00:00.307 TYA: Active=0
00:00:00.309 ROT: Mode 1
00:00:00.316 BRY: GC from 3898 to 3698 bytes, objects freed 4/17 (in 0 ms) - slots from 33/61 to 25/61
00:00:00.330 CFG: No '*.autoconf' file found
00:00:00.335 BRY: GC from 5826 to 4260 bytes, objects freed 8/35 (in 1 ms) - slots from 55/76 to 35/76
00:00:00.336 BRY: Berry initialized, RAM used 4260 bytes
00:00:00.341 BRY: No 'preinit.be'
00:00:00.343 SRC: Restart
00:00:00.346 Project tasmota - Tasmota Version 14.3.0(ottelo.jimdo.de)-3_1_0(2024-10-26T15:32:03)
00:00:00.350 SCR: performs "otaurl !!NEVER UPGRADE VIA WEB SERVER!!"
00:00:00.350 SRC: Rule
00:00:00.351 CMD: Grp 0, Cmd 'OTAURL', Idx 1, Len 32, Pld -99, Data '!!NEVER UPGRADE VIA WEB SERVER!!'
00:00:00.351 CFG: CR 401/699, Busy 0
00:00:00.352 RSL: RESULT = {"OtaUrl":"!!NEVER UPGRADE VIA WEB SERVER!!"}
00:00:00.364 SCR: performs "sensor53 r"
00:00:00.364 SRC: Rule
00:00:00.365 CMD: Grp 0, Cmd 'SENSOR', Idx 53, Len 1, Pld -99, Data 'r'
00:00:00.367 SML: uart used: 1
00:00:00.369 meters: 1 , decode lines: 3, memory used: 1816 bytes
00:00:00.370 RSL: RESULT = {"Time":"1970-01-01T00:00:00","SML":{"CMD":"restart"}}
00:00:00.390 ETH: No ETH MDC and ETH MDIO GPIO defined
00:00:00.392 SML: uart used: 1
00:00:00.393 meters: 1 , decode lines: 3, memory used: 1816 bytes
00:00:00.409 BRY: No 'autoexec.be'
00:00:00.421 NTP not ready
00:00:00.499 WIF: Checking connection...
00:00:00.499 WIF: Attempting connection...
00:00:01.002 WIF: Connecting to AP1 UPC2CB42C7 Channel 8 BSSId 90:5C:44:DA:9F:04 in mode HT40 as tasmota-1C972C-5932...
00:00:01.012 NTP not ready
00:00:02.150 WIF: IPv4 192.168.0.178, mask 255.255.255.0, gateway 192.168.0.1
00:00:02.736 NTP not ready
00:00:03.336 WIF: Checking connection...
00:00:03.337 WIF: Connected
00:00:03.423 WIF: IPv6 Local fe80::da3b:daff:fe1c:972c%st1
00:00:03.594 HTP: Web server active on tasmota-1C972C-5932 with IP address 192.168.0.178
00:00:03.736 NTP: Sync time...
00:00:03.771 WIF: DNS resolved '2.pool.ntp.org' (212.18.3.19) in 34 ms
00:00:03.814 RTC: UTC 2024-11-22T13:28:13Z, DST 2024-03-31T02:00:00, STD 2024-10-27T03:00:00
14:28:13.000 RTC: Synced by NTP
14:28:13.586 RSL: INFO1 = {"Info1":{"Module":"ESP32C3","Version":"14.3.0(ottelo.jimdo.de)","FallbackTopic":"cmnd/DVES_1C972C_fb/","GroupTopic":"cmnd/tasmotas/"}}
14:28:13.599 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-1C972C-5932","IPAddress":"192.168.0.178","IP6Global":"","IP6Local":"fe80::da3b:daff:fe1c:972c%st1"}}
14:28:13.614 RSL: INFO3 = {"Info3":{"RestartReason":{"Exception":27,"Reason":"Unknown","EPC":"4203017c","EXCVADDR":"00004a96","CallChain":["420c0b42","420c0b42","4214c0e8","42152f10","420a033c","420a0300","4209b692","4214e090","40389d86","420308ae","42036c7c","42025dca","4214e090","40389d86","40389be2","40389d2c","420a8e86","420adf78","420ae07e","40389be2","40389d2c","42011ab6","42011ada","4207a0a2","4207a14e","4200d20a","42016710","40389c54","420adf78","40387b48","40387b48","4215cade","420d98f8","42086cf0","4207fe6c"]},"BootCount":40}}
14:28:13.659 TFS: File 'autoexec.bat' not found
14:28:16.423 WIF: IPv6 Global 2a02:8070:8883:1140:da3b:daff:fe1c:972c
14:28:16.725 QPC: Reset
14:28:17.728 BRY: GC from 5981 to 4607 bytes, objects freed 16/46 (in 1 ms) - slots from 72/91 to 50/91
14:28:17.730 RSL: STATE = {"Time":"2024-11-22T14:28:17","Uptime":"0T00:00:08","UptimeSec":8,"Heap":161,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":4,"Objects":46},"Wifi":{"AP":1,"SSId":"UPC2CB42C7","BSSId":"90:5C:44:DA:9F:04","Channel":8,"Mode":"HT40","RSSI":66,"Signal":-67,"LinkCount":1,"Downtime":"0T00:00:03"}}
14:28:17.756 RSL: SENSOR = {"Time":"2024-11-22T14:28:17","EasyM":{"Power_curr":205,"Total_in":89.74,"Total_out":3.69}}
14:28:18.734 APP: Boot Count 40
14:28:19.221 CFG: Saved, Count 84, Bytes 4096
14:28:22.737 RSL: config = {"ip":"192.168.0.178","dn":"Tasmota","fn":["Tasmota",null,null,null,null,null,null,null],"hn":"tasmota-1C972C-5932","mac":"D83BDA1C972C","md":"ESP32C3","ty":0,"if":0,"ofln":"Offline","onln":"Online","state":["OFF","ON","TOGGLE","HOLD"],"sw":"14.3.0","t":"tasmota_1C972C","ft":"%prefix%/%topic%/","tp":["cmnd","stat","tele"],"rl":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"swc":[-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1],"swn":[null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null,null],"btn":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"so":{"4":0,"11":0,"13":0,"17":0,"20":0,"30":0,"68":0,"73":0,"82":0,"114":0,"117":0},"lk":0,"lt_st":0,"bat":0,"dslp":0,"sho":[],"sht":[],"ver":1}
14:28:22.742 RSL: sensors = {"sn":{"Time":"2024-11-22T14:28:22","EasyM":{"Power_curr":208,"Total_in":89.74,"Total_out":3.69}},"ver":1}
14:28:32.292 WIF: Checking connection...
14:28:52.339 WIF: Checking connection...
ottelo9 commented 1 day ago

Laut dem Script Entwickler gemu2015: Im aktuellen Core scheint es ein Problem zu geben, wenn die Webseite länger braucht um zu laden.

Ich melde mich falls ich mehr weiß.

mi-hol commented 21 hours ago

script läuft bisher 6h stabil auf "Tasmota 14.1.0 (ottelo.jimdo.de) by Theo Arends"

ottelo9 commented 14 hours ago

Bei mir läuft „SML Script + Chart + PV„ mit Tasmota 14.3.0 seit 11 Tagen auf einem ESP32-C3 mini. Oft rufe ich die Webseite aber nicht auf, da alles über Home Assistant läuft.

@mi-hol Kannst du bei dir mal testweise Stück für Stück die Diagramme auskommentieren bis keine Reboots mehr kommen? Mit Tasmota 14.3.0

Also zuerst das 4 und 24h Diagramm. Kommen die Reboots immernoch dann die Balkendiagramme. Einfach ein Semikolon davor schreiben ganz unten in der >W Sektion. Bei den 4/24h Diagrammen musst du einige Zeilen auskommentieren bei den Balkendiagrammen nur jeweils immer eine Zeile mit dem sub.

Ich bekomme ja zurzeit keine Reboots mehr hin kann es also irgendwie nicht mehr testen.

mi-hol commented 13 hours ago

Ich brauche leider für ein Projekt dringend die Daten und habe im Moment nur einen Lesekopf, es wird deshalb ein bischen dauern bevor ich den Wunsch erfüllen kann.

mWn die schnellste Methode einen reboot zu provozieren, war bei mir die Zeile $<script> setTimeout("location.reload(true);",1000); </script> zu aktivieren

mi-hol commented 13 hours ago

script läuft bisher 14h30m stabil auf "Tasmota 14.1.0 (ottelo.jimdo.de) by Theo Arends"