search

paynterf / MagCalTool

Magnetometer calibration GUI. Uses Octave to run MATLAB script on magnetometer point cloud
12 stars 1 forks source link

Unable to compile the Project #1

Closed NemesisXB closed 7 years ago

NemesisXB commented 7 years ago

I am trying to compile the project but the packages.config is missing and I can thus not automatically get VS to install the required packages. Tried to do it manually but I could not get it to compile. Can you perhaps commit the packages.config file.

paynterf commented 7 years ago

package.config added. Let me know if that helps

paynterf commented 7 years ago

package.config added just now. Please let me know if that helps

Frank

On Tue, Oct 24, 2017 at 7:58 AM, heroandroid notifications@github.com wrote:

I am trying to compile the project but the packages.config is missing and I can thus not automatically get VS to install the required packages. Tried to do it manually but I could not get it to compile. Can you perhaps commit the packages.config file.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/paynterf/MagCalTool/issues/1, or mute the thread https://github.com/notifications/unsubscribe-auth/AD0960hwtzp4XD24RhhQ6OvKqZ_a-4Z7ks5svdDXgaJpZM4QETML .

-- G.Frank Paynter, PhD OSU ESL Research Scientist (ret) EM Workbench LLC 614 594-2078 (home office)

NemesisXB commented 7 years ago

Hi Frank,

It works!

Thanks for sharing, brilliant piece of software.

Regards

paynterf commented 7 years ago

Great news!

And thanks for the compliment. Even though I ultimately decided not to use a magnetometer on my indoor robot application (too many interfering magnetic sources), I had fun building the calibration tool ;-)

Good luck

Frank

On Wed, Oct 25, 2017 at 4:47 AM, heroandroid notifications@github.com wrote:

Hi Frank,

It works!

Thanks for sharing, brilliant piece of software.

Regards

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/paynterf/MagCalTool/issues/1#issuecomment-339259922, or mute the thread https://github.com/notifications/unsubscribe-auth/AD09631T9XnHGT-l2GQz9lyFnHZWoRycks5svvWxgaJpZM4QETML .

-- G.Frank Paynter, PhD OSU ESL Research Scientist (ret) EM Workbench LLC 614 594-2078 (home office)