Open GoogleCodeExporter opened 9 years ago
Same issue for me
Kindly please resolve the issue
Original comment by shanmahe...@gmail.com
on 30 Jun 2013 at 7:52
Activate the 2nd gamepad too and check passthrough on device options
Original comment by barisham...@gmail.com
on 12 Jul 2013 at 2:19
Hi, i have the same problem. I wanted to play serious sam 3:bfe with my pc
gamepad which is not natively supported by the game, configured it and it
worked fine, but my original xbox 360 contoller which is connected also is now
not recognized by the game anymore. And when i load x360ce with my xbox
controller and not the pc gamepad connected, it loads the profile for the
controller, but there are like 3 controller tasks above the mappings, one with
a green dot, one with a yellow dot and one with a red dot. If you can solve my
problem or know how to solve it, feel free to contact me to
eliascecetka8@gmail.com. For the developers, please add a feature to let both
controllers work as two different xbox controllers without disabling the normal
connected xbox controller. Thanks for the good work though.
Original comment by EliasCec...@gmail.com
on 6 Jan 2015 at 8:25
Hello guys, i finally got it to work now, my problem was that my original xbox
controller was not recognized by the game anymore, when i run the game. But you
have to plug in both controllers, your "not-xbox-controller" and the xbox
controller, download the mappings for both controllers in the pop up window at
the first start of the application, after that you may have three tasks above
the mappings, (i had so i don't know if it will be same for you) there was one
green, one yellow and one red dot, the green button was my
"not-xbox-controller", and the yellow one was my original xbox controller,
which didn't work. so i went into the advanced settings and changed the device
type to "GamePad". Now both controllers are recognized as two different
gamepads in the game. I hope it worked for you.
Original comment by EliasCec...@gmail.com
on 7 Jan 2015 at 2:29
:-( now i have the problem that the y and the x axises switched places. Up on
my gamepad is now looking left in the game. Plz help me
Original comment by EliasCec...@gmail.com
on 7 Jan 2015 at 2:32
Look up in https://code.google.com/p/x360ce/wiki/Manuals for guides.
For you problem you need modify x360ce.ini manually, so read:
https://drive.google.com/folderview?id=0Bwwbd67F2GPBWUtuLTVpRkcwaHM&usp=sharing&
tid=0Bwwbd67F2GPBb05HRDlPUDJJRWc
Original comment by tapcio
on 7 Jan 2015 at 2:38
ok, solved it, switched the iaxis and stuff, but now the left shoulder button
is pressed as soon as i enter the negative y section of the right stick on the
gamepad.
Original comment by EliasCec...@gmail.com
on 7 Jan 2015 at 2:42
You use r848 libraries ? If not, read manual how to use it.
Original comment by tapcio
on 7 Jan 2015 at 2:45
Original issue reported on code.google.com by
furyma...@gmail.com
on 2 Jun 2013 at 10:31