Unable to Update

[P-C-R]

Hello,

i can not update my SL1. Tried updating via WiFi and USB. with 1.4.0 and 1.4.2 everytime it reboots and fails.

Here is my log:

https://pastebin.com/raw/WV6JFMwn

Oct 16 14:42:58 prusa64-sl1 kernel: Booting Linux on physical CPU 0x0000000000 [0x410fd034] Oct 16 14:42:58 prusa64-sl1 kernel: Linux version 4.19.81 (oe-user@oe-host) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Wed Mar 4 15:12:55 UTC 2020 Oct 16 14:42:58 prusa64-sl1 kernel: Machine model: PrusA64-SL1 Oct 16 14:42:58 prusa64-sl1 kernel: cma: Reserved 32 MiB at 0x000000007e000000 Oct 16 14:42:58 prusa64-sl1 kernel: On node 0 totalpages: 262144 Oct 16 14:42:58 prusa64-sl1 kernel: DMA32 zone: 4096 pages used for memmap Oct 16 14:42:58 prusa64-sl1 kernel: DMA32 zone: 0 pages reserved Oct 16 14:42:58 prusa64-sl1 kernel: DMA32 zone: 262144 pages, LIFO batch:63 Oct 16 14:42:58 prusa64-sl1 kernel: psci: probing for conduit method from DT. Oct 16 14:42:58 prusa64-sl1 kernel: psci: PSCIv1.1 detected in firmware. Oct 16 14:42:58 prusa64-sl1 kernel: psci: Using standard PSCI v0.2 function IDs Oct 16 14:42:58 prusa64-sl1 kernel: psci: MIGRATE_INFO_TYPE not supported. Oct 16 14:42:58 prusa64-sl1 kernel: psci: SMC Calling Convention v1.1 Oct 16 14:42:58 prusa64-sl1 kernel: random: get_random_bytes called from start_kernel+0x94/0x3f0 with crng_init=0 Oct 16 14:42:58 prusa64-sl1 kernel: percpu: Embedded 21 pages/cpu s47576 r8192 d30248 u86016 Oct 16 14:42:58 prusa64-sl1 kernel: pcpu-alloc: s47576 r8192 d30248 u86016 alloc=21*4096 Oct 16 14:42:58 prusa64-sl1 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Oct 16 14:42:58 prusa64-sl1 kernel: Detected VIPT I-cache on CPU0 Oct 16 14:42:58 prusa64-sl1 kernel: CPU features: enabling workaround for ARM erratum 843419 Oct 16 14:42:58 prusa64-sl1 kernel: CPU features: enabling workaround for ARM erratum 845719 Oct 16 14:42:58 prusa64-sl1 kernel: Speculative Store Bypass Disable mitigation not required Oct 16 14:42:58 prusa64-sl1 kernel: Built 1 zonelists, mobility grouping on. Total pages: 258048 Oct 16 14:42:58 prusa64-sl1 kernel: Kernel command line: rootwait panic=10 video=HDMI-A-1:D drm.edid_firmware=HDMI-A-1:edid/ls055r1sx04_148.5mhz.bin logo.nologo vt.global_cursor_default=0 console=ttyS0,115200 board_revision=0 stmmac.quirks=1 rauc.slot=B root=LABEL=rootfs.1 Oct 16 14:42:58 prusa64-sl1 kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: Memory: 980740K/1048576K available (7294K kernel code, 804K rwdata, 2360K rodata, 5504K init, 333K bss, 35068K reserved, 32768K cma-reserved) Oct 16 14:42:58 prusa64-sl1 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Oct 16 14:42:58 prusa64-sl1 kernel: rcu: Preemptible hierarchical RCU implementation. Oct 16 14:42:58 prusa64-sl1 kernel: Tasks RCU enabled. Oct 16 14:42:58 prusa64-sl1 kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 Oct 16 14:42:58 prusa64-sl1 kernel: GIC: Using split EOI/Deactivate mode Oct 16 14:42:58 prusa64-sl1 kernel: arch_timer: Enabling global workaround for Freescale erratum a005858 Oct 16 14:42:58 prusa64-sl1 kernel: arch_timer: CPU0: Trapping CNTVCT access Oct 16 14:42:58 prusa64-sl1 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys). Oct 16 14:42:58 prusa64-sl1 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Oct 16 14:42:58 prusa64-sl1 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Oct 16 14:42:58 prusa64-sl1 kernel: Console: colour dummy device 80x25 Oct 16 14:42:58 prusa64-sl1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) Oct 16 14:42:58 prusa64-sl1 kernel: pid_max: default: 32768 minimum: 301 Oct 16 14:42:58 prusa64-sl1 kernel: Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: ASID allocator initialised with 32768 entries Oct 16 14:42:58 prusa64-sl1 kernel: rcu: Hierarchical SRCU implementation. Oct 16 14:42:58 prusa64-sl1 kernel: smp: Bringing up secondary CPUs ... Oct 16 14:42:58 prusa64-sl1 kernel: Detected VIPT I-cache on CPU1 Oct 16 14:42:58 prusa64-sl1 kernel: arch_timer: CPU1: Trapping CNTVCT access Oct 16 14:42:58 prusa64-sl1 kernel: CPU1: Booted secondary processor 0x0000000001 [0x410fd034] Oct 16 14:42:58 prusa64-sl1 kernel: Detected VIPT I-cache on CPU2 Oct 16 14:42:58 prusa64-sl1 kernel: arch_timer: CPU2: Trapping CNTVCT access Oct 16 14:42:58 prusa64-sl1 kernel: CPU2: Booted secondary processor 0x0000000002 [0x410fd034] Oct 16 14:42:58 prusa64-sl1 kernel: Detected VIPT I-cache on CPU3 Oct 16 14:42:58 prusa64-sl1 kernel: arch_timer: CPU3: Trapping CNTVCT access Oct 16 14:42:58 prusa64-sl1 kernel: CPU3: Booted secondary processor 0x0000000003 [0x410fd034] Oct 16 14:42:58 prusa64-sl1 kernel: smp: Brought up 1 node, 4 CPUs Oct 16 14:42:58 prusa64-sl1 kernel: SMP: Total of 4 processors activated. Oct 16 14:42:58 prusa64-sl1 kernel: CPU features: detected: 32-bit EL0 Support Oct 16 14:42:58 prusa64-sl1 kernel: CPU: All CPU(s) started at EL2 Oct 16 14:42:58 prusa64-sl1 kernel: alternatives: patching kernel code Oct 16 14:42:58 prusa64-sl1 kernel: devtmpfs: initialized Oct 16 14:42:58 prusa64-sl1 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns Oct 16 14:42:58 prusa64-sl1 kernel: futex hash table entries: 1024 (order: 4, 65536 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: pinctrl core: initialized pinctrl subsystem Oct 16 14:42:58 prusa64-sl1 kernel: NET: Registered protocol family 16 Oct 16 14:42:58 prusa64-sl1 kernel: cpuidle: using governor menu Oct 16 14:42:58 prusa64-sl1 kernel: vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) Oct 16 14:42:58 prusa64-sl1 kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. Oct 16 14:42:58 prusa64-sl1 kernel: DMA: preallocated 256 KiB pool for atomic allocations Oct 16 14:42:58 prusa64-sl1 kernel: cryptd: max_cpu_qlen set to 1000 Oct 16 14:42:58 prusa64-sl1 kernel: SCSI subsystem initialized Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver usbfs Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver hub Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new device driver usb Oct 16 14:42:58 prusa64-sl1 kernel: Advanced Linux Sound Architecture Driver Initialized. Oct 16 14:42:58 prusa64-sl1 kernel: clocksource: Switched to clocksource arch_sys_counter Oct 16 14:42:58 prusa64-sl1 kernel: NET: Registered protocol family 2 Oct 16 14:42:58 prusa64-sl1 kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: TCP bind hash table entries: 8192 (order: 5, 131072 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: TCP: Hash tables configured (established 8192 bind 8192) Oct 16 14:42:58 prusa64-sl1 kernel: UDP hash table entries: 512 (order: 2, 16384 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: NET: Registered protocol family 1 Oct 16 14:42:58 prusa64-sl1 kernel: hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available Oct 16 14:42:58 prusa64-sl1 kernel: Initialise system trusted keyrings Oct 16 14:42:58 prusa64-sl1 kernel: workingset: timestamp_bits=46 max_order=18 bucket_order=0 Oct 16 14:42:58 prusa64-sl1 kernel: zbud: loaded Oct 16 14:42:58 prusa64-sl1 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Oct 16 14:42:58 prusa64-sl1 kernel: Key type asymmetric registered Oct 16 14:42:58 prusa64-sl1 kernel: Asymmetric key parser 'x509' registered Oct 16 14:42:58 prusa64-sl1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) Oct 16 14:42:58 prusa64-sl1 kernel: io scheduler noop registered (default) Oct 16 14:42:58 prusa64-sl1 kernel: io scheduler bfq registered Oct 16 14:42:58 prusa64-sl1 kernel: sun50i-de2-bus 1000000.de2: Error couldn't map SRAM to device Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO Oct 16 14:42:58 prusa64-sl1 kernel: sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver Oct 16 14:42:58 prusa64-sl1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Oct 16 14:42:58 prusa64-sl1 kernel: ili9806e-dsi 1ca0000.dsi.0: Couldn't get MIPI power regulator. Error: -517 Oct 16 14:42:58 prusa64-sl1 kernel: loop: module loaded Oct 16 14:42:58 prusa64-sl1 kernel: libphy: Fixed MDIO Bus: probed Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver asix Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver ax88179_178a Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver cdc_ether Oct 16 14:42:58 prusa64-sl1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform: EHCI generic platform driver Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1a000.usb: EHCI Host Controller Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1a000.usb: irq 25, io mem 0x01c1a000 Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb1: Product: EHCI Host Controller Oct 16 14:42:58 prusa64-sl1 kernel: usb usb1: Manufacturer: Linux 4.19.81 ehci_hcd Oct 16 14:42:58 prusa64-sl1 kernel: usb usb1: SerialNumber: 1c1a000.usb Oct 16 14:42:58 prusa64-sl1 kernel: hub 1-0:1.0: USB hub found Oct 16 14:42:58 prusa64-sl1 kernel: hub 1-0:1.0: 1 port detected Oct 16 14:42:58 prusa64-sl1 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform: OHCI generic platform driver Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform 1c1a400.usb: Generic Platform OHCI controller Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform 1c1a400.usb: irq 26, io mem 0x01c1a400 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb2: Product: Generic Platform OHCI controller Oct 16 14:42:58 prusa64-sl1 kernel: usb usb2: Manufacturer: Linux 4.19.81 ohci_hcd Oct 16 14:42:58 prusa64-sl1 kernel: usb usb2: SerialNumber: 1c1a400.usb Oct 16 14:42:58 prusa64-sl1 kernel: hub 2-0:1.0: USB hub found Oct 16 14:42:58 prusa64-sl1 kernel: hub 2-0:1.0: 1 port detected Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver cdc_acm Oct 16 14:42:58 prusa64-sl1 kernel: cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver usb-storage Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver ch341 Oct 16 14:42:58 prusa64-sl1 kernel: usbserial: USB Serial support registered for ch341-uart Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver cp210x Oct 16 14:42:58 prusa64-sl1 kernel: usbserial: USB Serial support registered for cp210x Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver ftdi_sio Oct 16 14:42:58 prusa64-sl1 kernel: usbserial: USB Serial support registered for FTDI USB Serial Device Oct 16 14:42:58 prusa64-sl1 kernel: i2c /dev entries driver Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) Oct 16 14:42:58 prusa64-sl1 kernel: ledtrig-cpu: registered to indicate activity on CPUs Oct 16 14:42:58 prusa64-sl1 kernel: usbcore: registered new interface driver usbhid Oct 16 14:42:58 prusa64-sl1 kernel: usbhid: USB HID core driver Oct 16 14:42:58 prusa64-sl1 kernel: NET: Registered protocol family 10 Oct 16 14:42:58 prusa64-sl1 kernel: Segment Routing with IPv6 Oct 16 14:42:58 prusa64-sl1 kernel: NET: Registered protocol family 17 Oct 16 14:42:58 prusa64-sl1 kernel: registered taskstats version 1 Oct 16 14:42:58 prusa64-sl1 kernel: Loading compiled-in X.509 certificates Oct 16 14:42:58 prusa64-sl1 kernel: zswap: loaded using pool lzo/zbud Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff000008821988) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff000008821988) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-tcon 1c0c000.lcd-controller: Missing LVDS properties, Please upgrade your DT Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-tcon 1c0c000.lcd-controller: LVDS output disabled Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: No panel or bridge found... RGB output disabled Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff00000881e300) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff00000881e300) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: failed to bind 1ca0000.dsi (ops 0xffff000008820eb0): -517 Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: Couldn't bind all pipelines components Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: master bind failed: -517 Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz Oct 16 14:42:58 prusa64-sl1 kernel: axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found Oct 16 14:42:58 prusa64-sl1 kernel: input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 Oct 16 14:42:58 prusa64-sl1 kernel: dcdc1: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dcdc2: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dcdc4: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dcdc5: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dcdc6: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dc1sw: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: aldo1: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: aldo2: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: aldo3: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dldo1: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dldo2: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dldo3: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: dldo4: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: eldo1: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: eldo2: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: eldo3: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: fldo1: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: fldo2: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: rtc-ldo: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: ldo-io0: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: ldo-io1: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: drivevbus: supplied by regulator-dummy Oct 16 14:42:58 prusa64-sl1 kernel: axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO Oct 16 14:42:58 prusa64-sl1 kernel: sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver Oct 16 14:42:58 prusa64-sl1 kernel: pwm-backlight backlight: Linked as a consumer to regulator.12 Oct 16 14:42:58 prusa64-sl1 kernel: console [ttyS0] disabled Oct 16 14:42:58 prusa64-sl1 kernel: 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 36, base_baud = 1500000) is a U6_16550A Oct 16 14:42:58 prusa64-sl1 kernel: console [ttyS0] enabled Oct 16 14:42:58 prusa64-sl1 kernel: 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 37, base_baud = 1500000) is a U6_16550A Oct 16 14:42:58 prusa64-sl1 kernel: 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 38, base_baud = 1500000) is a U6_16550A Oct 16 14:42:58 prusa64-sl1 kernel: ili9806e-dsi 1ca0000.dsi.0: Linked as a consumer to regulator.12 Oct 16 14:42:58 prusa64-sl1 kernel: ili9806e-dsi 1ca0000.dsi.0: Couldn't get our bkl GPIO. Error: -2 Oct 16 14:42:58 prusa64-sl1 kernel: sun6i-mipi-dsi 1ca0000.dsi: Attached device tl040wv27ct3 Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: PTP uses main clock Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: Linked as a consumer to regulator.2 Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: COE Type 2 Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: Normal descriptors Oct 16 14:42:58 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet: Chain mode enabled Oct 16 14:42:58 prusa64-sl1 kernel: libphy: stmmac: probed Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: probing for TC358870XBG i2c Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.18 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.4 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.16 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: regulator_bulk_get failed Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Dropping the link to regulator.16 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Dropping the link to regulator.4 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Dropping the link to regulator.18 Oct 16 14:42:58 prusa64-sl1 kernel: input: generic ft5x06 (11) as /devices/platform/soc/1c2b000.i2c/i2c-1/1-0038/input/input1 Oct 16 14:42:58 prusa64-sl1 kernel: rtc-pcf8563 2-0051: rtc core: registered rtc-pcf8563 as rtc0 Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2 Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c0f000.mmc: Got CD GPIO Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.9 Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.14 Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c11000.mmc: Linked as a consumer to regulator.1 Oct 16 14:42:58 prusa64-sl1 kernel: random: fast init done Oct 16 14:42:58 prusa64-sl1 kernel: mmc1: queuing unknown CIS tuple 0x80 (2 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB Oct 16 14:42:58 prusa64-sl1 kernel: mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: sun50i-codec-analog 1f015c0.codec-analog: Linked as a consumer to regulator.15 Oct 16 14:42:58 prusa64-sl1 kernel: mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: asoc-simple-card sound: sun8i <-> 1c22c00.dai mapping ok Oct 16 14:42:58 prusa64-sl1 kernel: asoc-simple-card sound: ASoC: no sink widget found for Speaker Oct 16 14:42:58 prusa64-sl1 kernel: asoc-simple-card sound: ASoC: Failed to add route LINEOUT -> direct -> Speaker Oct 16 14:42:58 prusa64-sl1 kernel: mmc1: queuing unknown CIS tuple 0x80 (7 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: mmc1: queuing unknown CIS tuple 0x81 (9 bytes) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff000008821988) Oct 16 14:42:58 prusa64-sl1 kernel: mmc1: new high speed SDIO card at address 0001 Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff000008821988) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-tcon 1c0c000.lcd-controller: Missing LVDS properties, Please upgrade your DT Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-tcon 1c0c000.lcd-controller: LVDS output disabled Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: No panel or bridge found... RGB output disabled Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff00000881e300) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff00000881e300) Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffff000008820eb0) Oct 16 14:42:58 prusa64-sl1 kernel: sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer to regulator.11 Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c11000.mmc: data error, sending stop command Oct 16 14:42:58 prusa64-sl1 kernel: sunxi-mmc 1c11000.mmc: send stop command failed Oct 16 14:42:58 prusa64-sl1 kernel: mmc2: switch to bus width 8 failed Oct 16 14:42:58 prusa64-sl1 kernel: sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy) Oct 16 14:42:58 prusa64-sl1 kernel: mmc2: new high speed MMC card at address 0001 Oct 16 14:42:58 prusa64-sl1 kernel: mmcblk2: mmc2:0001 P1XXXX 3.60 GiB Oct 16 14:42:58 prusa64-sl1 kernel: mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB Oct 16 14:42:58 prusa64-sl1 kernel: sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver Oct 16 14:42:58 prusa64-sl1 kernel: [drm] forcing HDMI-A-1 connector on Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffff000008821310) Oct 16 14:42:58 prusa64-sl1 kernel: mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB Oct 16 14:42:58 prusa64-sl1 kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Oct 16 14:42:58 prusa64-sl1 kernel: [drm] No driver support for vblank timestamp query. Oct 16 14:42:58 prusa64-sl1 kernel: [drm] Got built-in EDID base block and 0 extensions from "edid/ls055r1sx04_148.5mhz.bin" for connector "HDMI-A-1" Oct 16 14:42:58 prusa64-sl1 kernel: mmcblk2: p1 p2 p3 p4 p5 p6 p7 Oct 16 14:42:58 prusa64-sl1 kernel: Console: switching to colour frame buffer device 60x50 Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-drm display-engine: fb0: DRM emulated frame buffer device Oct 16 14:42:58 prusa64-sl1 kernel: [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.23 Oct 16 14:42:58 prusa64-sl1 kernel: sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.25 Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1b000.usb: EHCI Host Controller Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000 Oct 16 14:42:58 prusa64-sl1 kernel: ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb3: Product: EHCI Host Controller Oct 16 14:42:58 prusa64-sl1 kernel: usb usb3: Manufacturer: Linux 4.19.81 ehci_hcd Oct 16 14:42:58 prusa64-sl1 kernel: usb usb3: SerialNumber: 1c1b000.usb Oct 16 14:42:58 prusa64-sl1 kernel: hub 3-0:1.0: USB hub found Oct 16 14:42:58 prusa64-sl1 kernel: hub 3-0:1.0: 1 port detected Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform 1c1b400.usb: Generic Platform OHCI controller Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4 Oct 16 14:42:58 prusa64-sl1 kernel: ohci-platform 1c1b400.usb: irq 28, io mem 0x01c1b400 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb4: Product: Generic Platform OHCI controller Oct 16 14:42:58 prusa64-sl1 kernel: usb usb4: Manufacturer: Linux 4.19.81 ohci_hcd Oct 16 14:42:58 prusa64-sl1 kernel: usb usb4: SerialNumber: 1c1b400.usb Oct 16 14:42:58 prusa64-sl1 kernel: hub 4-0:1.0: USB hub found Oct 16 14:42:58 prusa64-sl1 kernel: hub 4-0:1.0: 1 port detected Oct 16 14:42:58 prusa64-sl1 kernel: usb_phy_generic usb_phy_generic.2.auto: usb_phy_generic.2.auto supply vcc not found, using dummy regulator Oct 16 14:42:58 prusa64-sl1 kernel: usb_phy_generic usb_phy_generic.2.auto: Linked as a consumer to regulator.0 Oct 16 14:42:58 prusa64-sl1 kernel: musb-hdrc musb-hdrc.3.auto: MUSB HDRC host driver Oct 16 14:42:58 prusa64-sl1 kernel: musb-hdrc musb-hdrc.3.auto: new USB bus registered, assigned bus number 5 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 16 14:42:58 prusa64-sl1 kernel: usb usb5: Product: MUSB HDRC host driver Oct 16 14:42:58 prusa64-sl1 kernel: usb usb5: Manufacturer: Linux 4.19.81 musb-hcd Oct 16 14:42:58 prusa64-sl1 kernel: usb usb5: SerialNumber: musb-hdrc.3.auto Oct 16 14:42:58 prusa64-sl1 kernel: hub 5-0:1.0: USB hub found Oct 16 14:42:58 prusa64-sl1 kernel: hub 5-0:1.0: 1 port detected Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: probing for TC358870XBG i2c Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.18 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.4 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.24 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Linked as a consumer to regulator.16 Oct 16 14:42:58 prusa64-sl1 kernel: [drm] Got built-in EDID base block and 0 extensions from "edid/ls055r1sx04_148.5mhz.bin" for connector "HDMI-A-1" Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: Regulator vdd12_mipi-supply and vdd11_hdmi-supply succesfully enabled Oct 16 14:42:58 prusa64-sl1 kernel: sun4i_tcon0_mode_set_common, rate: 27000 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x00 Oct 16 14:42:58 prusa64-sl1 kernel: usb 3-1: new high-speed USB device number 2 using ehci-platform Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x01 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: REG_CHIP_ID: 0x0047 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x00 Oct 16 14:42:58 prusa64-sl1 kernel: usb 3-1: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00 Oct 16 14:42:58 prusa64-sl1 kernel: usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 16 14:42:58 prusa64-sl1 kernel: usb 3-1: Product: Ultra USB 3.0 Oct 16 14:42:58 prusa64-sl1 kernel: usb 3-1: Manufacturer: SanDisk Oct 16 14:42:58 prusa64-sl1 kernel: usb 3-1: SerialNumber: 01016fbb84bb945f0165333435f7aabe07a1884cb0c2a33b5525898fba29551108da00000000000000000000a82f377c009d430095558107a726ed51 Oct 16 14:42:58 prusa64-sl1 kernel: usb-storage 3-1:1.0: USB Mass Storage device detected Oct 16 14:42:58 prusa64-sl1 kernel: scsi host0: usb-storage 3-1:1.0 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x01 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x01 Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x0f Oct 16 14:42:58 prusa64-sl1 kernel: tc358870 0-000f: tc358870 REG_SYS_STATUS: 0x8f Oct 16 14:42:58 prusa64-sl1 kernel: [drm] Got built-in EDID base block and 0 extensions from "edid/ls055r1sx04_148.5mhz.bin" for connector "HDMI-A-1" Oct 16 14:42:58 prusa64-sl1 kernel: rtc-pcf8563 2-0051: setting system clock to 2020-10-16 12:42:56 UTC (1602852176) Oct 16 14:42:58 prusa64-sl1 kernel: ALSA device list: Oct 16 14:42:58 prusa64-sl1 kernel: #0: sun50i-a64-audio Oct 16 14:42:58 prusa64-sl1 kernel: Freeing unused kernel memory: 5504K Oct 16 14:42:58 prusa64-sl1 kernel: Run /init as init process Oct 16 14:42:58 prusa64-sl1 kernel: EXT4-fs (mmcblk2p3): mounted filesystem with ordered data mode. Opts: (null) Oct 16 14:42:58 prusa64-sl1 kernel: scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 Oct 16 14:42:58 prusa64-sl1 kernel: sd 0:0:0:0: [sda] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) Oct 16 14:42:58 prusa64-sl1 kernel: EXT4-fs (mmcblk2p5): mounted filesystem with ordered data mode. Opts: (null) Oct 16 14:42:58 prusa64-sl1 kernel: sd 0:0:0:0: [sda] Write Protect is off Oct 16 14:42:58 prusa64-sl1 kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 Oct 16 14:42:58 prusa64-sl1 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Oct 16 14:42:58 prusa64-sl1 kernel: EXT4-fs (mmcblk2p6): mounted filesystem with ordered data mode. Opts: (null) Oct 16 14:42:58 prusa64-sl1 kernel: sda: sda1 Oct 16 14:42:58 prusa64-sl1 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk Oct 16 14:42:58 prusa64-sl1 systemd[1]: systemd 242-19-gdb2e367+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) Oct 16 14:42:58 prusa64-sl1 systemd[1]: Detected architecture arm64. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Set hostname to <prusa64-sl1>. Oct 16 14:42:58 prusa64-sl1 systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) Oct 16 14:42:58 prusa64-sl1 systemd[1]: /usr/lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. Oct 16 14:42:58 prusa64-sl1 systemd[1]: /usr/lib/systemd/system/haveged.service:5: PIDFile= references a path below legacy directory /var/run/, updating /var/run/haveged.pid → /run/haveged.pid; please update the unit file accordingly. Oct 16 14:42:58 prusa64-sl1 systemd[1]: /usr/lib/systemd/system/rpcbind.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock → /run/rpcbind.sock; please update the unit file accordingly. Oct 16 14:42:58 prusa64-sl1 kernel: random: systemd: uninitialized urandom read (16 bytes read) Oct 16 14:42:58 prusa64-sl1 systemd[1]: Listening on Journal Socket. Oct 16 14:42:58 prusa64-sl1 kernel: random: systemd: uninitialized urandom read (16 bytes read) Oct 16 14:42:58 prusa64-sl1 systemd[1]: Starting Prusa SLA splash screen... Oct 16 14:42:58 prusa64-sl1 kernel: random: systemd: uninitialized urandom read (16 bytes read) Oct 16 14:42:58 prusa64-sl1 kernel: mali: loading out-of-tree module taints kernel. Oct 16 14:42:58 prusa64-sl1 kernel: Allwinner sunXi mali glue initialized Oct 16 14:42:58 prusa64-sl1 kernel: Mali: Oct 16 14:42:58 prusa64-sl1 kernel: Found Mali GPU Mali-400 MP r1p1 Oct 16 14:42:58 prusa64-sl1 kernel: Mali: Oct 16 14:42:58 prusa64-sl1 kernel: 2+0 PP cores initialized Oct 16 14:42:58 prusa64-sl1 kernel: Mali: Oct 16 14:42:58 prusa64-sl1 kernel: Mali device driver loaded Oct 16 14:42:58 prusa64-sl1 kernel: EXT4-fs (mmcblk2p3): re-mounted. Opts: (null) Oct 16 14:42:58 prusa64-sl1 systemd-journald[200]: Journal started Oct 16 14:42:58 prusa64-sl1 systemd-journald[200]: Runtime journal (/run/log/journal/c1a6ed97b3f94f9e814566b02fbb27b8) is 8.0M, max 64.0M, 56.0M free. Oct 16 14:42:58 prusa64-sl1 systemd-modules-load[196]: Inserted module 'mali' Oct 16 14:42:58 prusa64-sl1 systemd-sysctl[212]: Couldn't write 'fq_codel' to 'net/core/default_qdisc', ignoring: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd[1]: Started Load/Save Random Seed. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Started Create Static Device Nodes in /dev. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Started Apply Kernel Variables. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Mounted Kernel Configuration File System. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Starting udev Kernel Device Manager... Oct 16 14:42:58 prusa64-sl1 systemd[1]: Reached target Local File Systems (Pre). Oct 16 14:42:58 prusa64-sl1 systemd[1]: Mounting /var/volatile... Oct 16 14:42:58 prusa64-sl1 systemd[1]: Mounting Mount factory partition... Oct 16 14:42:58 prusa64-sl1 systemd[1]: Starting Flush Journal to Persistent Storage... Oct 16 14:42:58 prusa64-sl1 systemd[1]: Mounted /var/volatile. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Started udev Coldplug all Devices. Oct 16 14:42:58 prusa64-sl1 systemd-journald[200]: Time spent on flushing to /var is 1.362707s for 371 entries. Oct 16 14:42:58 prusa64-sl1 systemd-journald[200]: System journal (/var/log/journal/c1a6ed97b3f94f9e814566b02fbb27b8) is 232.0M, max 768.0M, 535.9M free. Oct 16 14:43:00 prusa64-sl1 kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database Oct 16 14:43:00 prusa64-sl1 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Oct 16 14:43:00 prusa64-sl1 kernel: random: crng init done Oct 16 14:43:00 prusa64-sl1 kernel: random: 7 urandom warning(s) missed due to ratelimiting Oct 16 14:43:00 prusa64-sl1 kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 Oct 16 14:43:00 prusa64-sl1 kernel: EXT4-fs (mmcblk2p7): mounted filesystem with ordered data mode. Opts: (null) Oct 16 14:43:00 prusa64-sl1 kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 Oct 16 14:43:00 prusa64-sl1 kernel: brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available Oct 16 14:43:00 prusa64-sl1 kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0 Oct 16 14:42:59 prusa64-sl1 root[257]: mount.sh/automount Auto-mount of [/run/media/root/sda1] successful Oct 16 14:42:58 prusa64-sl1 systemd[1]: Started udev Kernel Device Manager. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Created slice system-systemd\x2dbacklight.slice. Oct 16 14:42:58 prusa64-sl1 systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:backlight... Oct 16 14:42:58 prusa64-sl1 systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:backlight. Oct 16 14:42:58 prusa64-sl1 systemd-udevd[222]: mmcblk2p3: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p3/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[224]: mmcblk2p1: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p1/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[225]: mmcblk2p4: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p4/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[223]: mmcblk2p5: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p5/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[219]: mmcblk2p2: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p2/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[221]: mmcblk2p6: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p6/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[222]: mmcblk2p7: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p7/queue/scheduler} for writing: No such file or directory Oct 16 14:42:58 prusa64-sl1 systemd-udevd[220]: Using default interface naming scheme 'v240'. Oct 16 14:42:59 prusa64-sl1 systemd-udevd[220]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 16 14:42:59 prusa64-sl1 systemd-udevd[220]: link_config: could not get ethtool features for eth0 Oct 16 14:42:59 prusa64-sl1 systemd-udevd[220]: Could not set offload features of eth0: Device or resource busy Oct 16 14:42:59 prusa64-sl1 systemd-udevd[220]: Process '/usr/sbin/alsactl restore 0' failed with exit code 99. Oct 16 14:42:59 prusa64-sl1 systemd-udevd[222]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Condition check resulted in Huge Pages File System being skipped. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Condition check resulted in Create list of required static device nodes for the current kernel being skipped. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Condition check resulted in File System Check on Root Device being skipped. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Condition check resulted in FUSE Control File System being skipped. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. Oct 16 14:42:59 prusa64-sl1 systemd[1]: Condition check resulted in Create System Users being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Found device Ultra_USB_3.0 20191024-EO. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Mounted Mount factory partition. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Local File Systems. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Set up automount run-media-root-sda1.automount. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Load/Save RF Kill Switch Status... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Flush Journal to Persistent Storage. Oct 16 14:43:00 prusa64-sl1 systemd-udevd[224]: Using default interface naming scheme 'v240'. Oct 16 14:43:00 prusa64-sl1 systemd-udevd[224]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Create Volatile Files and Directories... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Load/Save RF Kill Switch Status. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Create Volatile Files and Directories. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Condition check resulted in Rebuild Journal Catalog being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Condition check resulted in Update is Completed being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Network Name Resolution... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Network Time Synchronization... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Update UTMP about System Boot/Shutdown... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Update UTMP about System Boot/Shutdown. Oct 16 14:43:00 prusa64-sl1 systemd-resolved[268]: Positive Trust Anchors: Oct 16 14:43:00 prusa64-sl1 systemd-resolved[268]: . IN DS 19036 8 2 49aac11d7b6f6446702e54a1607371607a1a41855200fd2ce1cdde32f24e8fb5 Oct 16 14:43:00 prusa64-sl1 systemd-resolved[268]: . IN DS 20326 8 2 e06d44b80b8f1d39a95c0b0d7c65d08458e880409bbc683457104237c7f8ec8d Oct 16 14:43:00 prusa64-sl1 systemd-resolved[268]: Negative trust anchors: 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-addr.arpa 24.172.in-addr.arpa 25.172.in-addr.arpa 26.172.in-addr.arpa 27.172.in-addr.arpa 28.172.in-addr.arpa 29.172.in-addr.arpa 30.172.in-addr.arpa 31.172.in-addr.arpa 168.192.in-addr.arpa d.f.ip6.arpa corp home internal intranet lan local private test Oct 16 14:43:00 prusa64-sl1 systemd-resolved[268]: Using system hostname 'prusa64-sl1'. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Network Name Resolution. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Network Time Synchronization. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target System Time Set. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target System Time Synchronized. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target System Initialization. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Listening on RPCbind Server Activation Socket. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Daily Cleanup of Temporary Directories. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Timers. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Listening on Journal Gateway Service Socket. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Listening on D-Bus System Message Bus Socket. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Sockets. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Start avahi-restart when hostname changes. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Paths. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Basic System. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Emergency update service. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Rauc Update Service... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started D-Bus System Message Bus. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Network Manager... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Condition check resulted in Manage Sound Card State (restore and store) being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Save/Restore Sound Card State... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Condition check resulted in Save/Restore Factory Sound Card State being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Power panic response service. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Login Service... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Condition check resulted in API key generator for octoprint upload service being skipped. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Starting Avahi mDNS/DNS-SD Stack... Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Host and Network Name Lookups. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Started Save/Restore Sound Card State. Oct 16 14:43:00 prusa64-sl1 systemd[1]: Reached target Sound Card. Oct 16 14:43:01 prusa64-sl1 systemd-logind[281]: Configuration file /usr/lib/systemd/logind.conf.d/no-auto-vt.conf is marked executable. Please remove executable permission bits. Proceeding anyway. Oct 16 14:43:01 prusa64-sl1 systemd-logind[281]: New seat seat0. Oct 16 14:43:01 prusa64-sl1 systemd-logind[281]: Watching system buttons on /dev/input/event0 (axp20x-pek) Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Login Service. Oct 16 14:43:01 prusa64-sl1 haveged[282]: haveged: listening socket at 3 Oct 16 14:43:01 prusa64-sl1 haveged[282]: haveged starting up Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Found user 'avahi' (UID 995) and group 'avahi' (GID 994). Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Successfully dropped root privileges. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: avahi-daemon 0.7 starting up. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Successfully called chroot(). Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Avahi mDNS/DNS-SD Stack. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Successfully dropped remaining capabilities. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Loading service file /services/octoprint.service. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Loading service file /services/sftp-ssh.service. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Loading service file /services/ssh.service. Oct 16 14:43:01 prusa64-sl1 panic[280]: Initializing panic GPIO Oct 16 14:43:01 prusa64-sl1 panic[280]: Waiting for panic Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Network interface enumeration completed. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Server startup complete. Host name is prusa64-sl1.local. Local service cookie is 1028314421. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Service "prusa64-sl1" (/services/ssh.service) successfully established. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Service "prusa64-sl1" (/services/sftp-ssh.service) successfully established. Oct 16 14:43:01 prusa64-sl1 avahi-daemon[283]: Service "Original Prusa SL1 "prusa64-sl1"" (/services/octoprint.service) successfully established. Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Rauc Update Service. Oct 16 14:43:01 prusa64-sl1 NetworkManager[278]: <info> [1602852181.6577] NetworkManager (version 1.18.0) is starting... (for the first time) Oct 16 14:43:01 prusa64-sl1 NetworkManager[278]: <info> [1602852181.6580] Read config: /etc/NetworkManager/NetworkManager.conf Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Network Manager. Oct 16 14:43:01 prusa64-sl1 NetworkManager[278]: <info> [1602852181.6821] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager" Oct 16 14:43:01 prusa64-sl1 systemd[1]: Starting SL1 firmware... Oct 16 14:43:01 prusa64-sl1 NetworkManager[278]: <info> [1602852181.6989] manager[0x11fa020]: monitoring kernel firmware directory '/lib/firmware'. Oct 16 14:43:01 prusa64-sl1 systemd[1]: Starting Network Manager Wait Online... Oct 16 14:43:01 prusa64-sl1 kernel: Console: switching to colour dummy device 80x25 Oct 16 14:43:01 prusa64-sl1 systemd[1]: Reached target Network. Oct 16 14:43:01 prusa64-sl1 systemd[1]: Starting The NGINX HTTP and reverse proxy server... Oct 16 14:43:01 prusa64-sl1 systemd[1]: Starting Permit User Sessions... Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started SL1 firmware. Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Octoprint-like file upload service (for uploading files from slic3r). Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started SL1 Client. Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Rauc Good-marking Service. Oct 16 14:43:01 prusa64-sl1 systemd[1]: Started Permit User Sessions. Oct 16 14:43:02 prusa64-sl1 nginx[296]: nginx: the configuration file /etc/nginx/nginx.conf syntax is ok Oct 16 14:43:02 prusa64-sl1 nginx[296]: nginx: configuration file /etc/nginx/nginx.conf test is successful Oct 16 14:43:02 prusa64-sl1 systemd[1]: Started The NGINX HTTP and reverse proxy server. Oct 16 14:43:02 prusa64-sl1 dbus-daemon[277]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.6' (uid=0 pid=278 comm="/usr/sbin/NetworkManager --no-daemon ") Oct 16 14:43:02 prusa64-sl1 systemd[1]: Starting Hostname Service... Oct 16 14:43:02 prusa64-sl1 rauc[275]: mounting slot /dev/mmcblk2p4 Oct 16 14:43:02 prusa64-sl1 kernel: EXT4-fs (mmcblk2p4): mounted filesystem with ordered data mode. Opts: (null) Oct 16 14:43:02 prusa64-sl1 dbus-daemon[277]: [system] Successfully activated service 'org.freedesktop.hostname1' Oct 16 14:43:02 prusa64-sl1 systemd[1]: Started Hostname Service. Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.8391] hostname: hostname: using hostnamed Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.8393] hostname: hostname changed from (none) to "prusa64-sl1" Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.8409] dns-mgr[0x11df210]: init: dns=systemd-resolved rc-manager=symlink, plugin=systemd-resolved Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.8443] rfkill0: found Wi-Fi radio killswitch (at /sys/devices/platform/soc/1c10000.mmc/mmc_host/mmc1/mmc1:0001/mmc1:0001:1/ieee80211/phy0/rfkill0) (driver brcmfmac) Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.8454] manager[0x11fa020]: rfkill: Wi-Fi hardware radio set enabled Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.8456] manager[0x11fa020]: rfkill: WWAN hardware radio set enabled Oct 16 14:43:02 prusa64-sl1 dbus-daemon[277]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=278 comm="/usr/sbin/NetworkManager --no-daemon ") Oct 16 14:43:02 prusa64-sl1 dbus-daemon[277]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Unit dbus-org.freedesktop.nm-dispatcher.service not found. Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <error> [1602852182.8559] dispatcher: could not get dispatcher proxy! Error calling StartServiceByName for org.freedesktop.nm_dispatcher: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.freedesktop.nm-dispatcher.service not found. Oct 16 14:43:02 prusa64-sl1 haveged[284]: haveged: ver: 1.9.4; arch: generic; vend: ; build: (gcc 9.1.0 CTV); collect: 128K Oct 16 14:43:02 prusa64-sl1 haveged[284]: haveged: cpu: (VC); data: 16K (D P V); inst: 16K (D V); idx: 11/40; sz: 15456/64452 Oct 16 14:43:02 prusa64-sl1 haveged[284]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 7.99751 Oct 16 14:43:02 prusa64-sl1 haveged[284]: haveged: fills: 0, generated: 0 Oct 16 14:43:02 prusa64-sl1 rauc[275]: mounting slot /dev/mmcblk2p2 Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <warn> [1602852182.9725] ifupdown: interfaces file /etc/network/interfaces doesn't exist Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.9727] ifupdown: management mode: unmanaged Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.9728] settings: Loaded settings plugin: SettingsPluginIfupdown ("/usr/lib/NetworkManager/1.18.0/libnm-settings-plugin-ifupdown.so") Oct 16 14:43:02 prusa64-sl1 NetworkManager[278]: <info> [1602852182.9729] settings: Loaded settings plugin: NMSKeyfilePlugin (internal) Oct 16 14:43:03 prusa64-sl1 kernel: EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0170] keyfile: new connection /etc/NetworkManager/system-connections/Haffmans & Neumeister Guest.nmconnection (5b6f694d-8d28-48be-b714-a3d52f3975f6,"Haffmans & Neumeister Guest") Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0310] manager: rfkill: Wi-Fi enabled by radio killswitch; enabled by state file Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0320] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0326] manager: Networking is enabled by state file Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0330] dhcp-init: Using DHCP client 'dhclient' Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0444] Loaded device plugin: NMAtmManager (/usr/lib/NetworkManager/1.18.0/libnm-device-plugin-adsl.so) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0537] Loaded device plugin: NMOvsFactory (/usr/lib/NetworkManager/1.18.0/libnm-device-plugin-ovs.so) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0641] Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/1.18.0/libnm-device-plugin-wifi.so) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0693] device (lo): carrier: link connected Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0711] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0747] device (eth0): driver '(null)' does not support carrier detection. Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0758] device (eth0): driver 'dwmac-sun8i' does not support carrier detection. Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0783] manager: (eth0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0898] keyfile: add connection /var/run/NetworkManager/system-connections/Wired connection 1.nmconnection (a4326e84-a617-3595-82ac-6a727af15cc8,"Wired connection 1") Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0934] settings: (eth0): created default wired connection 'Wired connection 1' Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.0986] device (eth0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external') Oct 16 14:43:03 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 16 14:43:03 prusa64-sl1 kernel: RTL8201F Fast Ethernet stmmac-0:01: attached PHY driver [RTL8201F Fast Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) Oct 16 14:43:03 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found Oct 16 14:43:03 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available Oct 16 14:43:03 prusa64-sl1 kernel: dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW Oct 16 14:43:03 prusa64-sl1 rauc[275]: Failed to load status file /etc/slot.raucs: No such file or directory Oct 16 14:43:03 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.1675] device (wlan0): driver supports Access Point (AP) mode Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.1705] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/3) Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.1760] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external') Oct 16 14:43:03 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 16 14:43:03 prusa64-sl1 rauc[275]: rauc mark: marked slot rootfs.1 as good Oct 16 14:43:03 prusa64-sl1 rauc[301]: rauc mark: marked slot rootfs.1 as good Oct 16 14:43:03 prusa64-sl1 systemd[1]: rauc-mark-good.service: Succeeded. Oct 16 14:43:03 prusa64-sl1 systemd-udevd[221]: mmcblk2p4: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p4/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 systemd-udevd[228]: mmcblk2p2: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p2/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 systemd-udevd[219]: mmcblk2p3: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p3/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 systemd-udevd[220]: mmcblk2p7: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p7/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 systemd-udevd[224]: mmcblk2p1: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p1/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 systemd-udevd[227]: mmcblk2p5: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p5/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 systemd-udevd[226]: mmcblk2p6: Failed to open ATTR{/sys/devices/platform/soc/1c11000.mmc/mmc_host/mmc2/mmc2:0001/block/mmcblk2/mmcblk2p6/queue/scheduler} for writing: No such file or directory Oct 16 14:43:03 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 16 14:43:03 prusa64-sl1 SLAGUI[300]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root' Oct 16 14:43:03 prusa64-sl1 SLAGUI[300]: Setting framebuffer size is only available with DRM atomic API Oct 16 14:43:03 prusa64-sl1 NetworkManager[278]: <info> [1602852183.9271] device (wlan0): set-hw-addr: set MAC address to 3E:C0:58:83:EA:57 (scanning) Oct 16 14:43:03 prusa64-sl1 SLAGUI[300]: Setting framebuffer size is only available with DRM atomic API Oct 16 14:43:03 prusa64-sl1 kernel: [drm] Got built-in EDID base block and 0 extensions from "edid/ls055r1sx04_148.5mhz.bin" for connector "HDMI-A-1" Oct 16 14:43:03 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 16 14:43:03 prusa64-sl1 SLAGUI[300]: Unable to query physical screen size, defaulting to 100 dpi. Oct 16 14:43:03 prusa64-sl1 SLAGUI[300]: To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters). Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.0212] ovsdb: Could not connect: No such file or directory Oct 16 14:43:04 prusa64-sl1 dbus-daemon[277]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service' requested by ':1.6' (uid=0 pid=278 comm="/usr/sbin/NetworkManager --no-daemon ") Oct 16 14:43:04 prusa64-sl1 systemd[1]: Starting WPA supplicant... Oct 16 14:43:04 prusa64-sl1 dbus-daemon[277]: [system] Successfully activated service 'fi.w1.wpa_supplicant1' Oct 16 14:43:04 prusa64-sl1 wpa_supplicant[331]: Successfully initialized wpa_supplicant Oct 16 14:43:04 prusa64-sl1 systemd[1]: Started WPA supplicant. Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.1717] supplicant: wpa_supplicant running Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.1720] device (wlan0): supplicant interface state: init -> starting Oct 16 14:43:04 prusa64-sl1 dbus-daemon[277]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service' requested by ':1.11' (uid=0 pid=300 comm="/usr/bin/SLAGUI ") Oct 16 14:43:04 prusa64-sl1 systemd[1]: Starting Locale Service... Oct 16 14:43:04 prusa64-sl1 wpa_supplicant[331]: Libgcrypt warning: missing initialization - please fix the application Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.4813] sup-iface[0x12578c0,wlan0]: supports 5 scan SSIDs Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.4893] device (wlan0): supplicant interface state: starting -> ready Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.4905] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed') Oct 16 14:43:04 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 16 14:43:04 prusa64-sl1 dbus-daemon[277]: [system] Successfully activated service 'org.freedesktop.locale1' Oct 16 14:43:04 prusa64-sl1 systemd[1]: Started Locale Service. Oct 16 14:43:04 prusa64-sl1 SLAGUI[300]: Wireless active connection changed to " "No active connection" " Oct 16 14:43:04 prusa64-sl1 SLAGUI[300]: cz.prusa3d.Updater1.UpdateInfo type == DBusArgument::UnknownType. Is the service not available? Oct 16 14:43:04 prusa64-sl1 SLAGUI[300]: cz.prusa3d.Updater1.UpdateInfo type == DBusArgument::UnknownType. Is the service not available? Oct 16 14:43:04 prusa64-sl1 NetworkManager[278]: <info> [1602852184.6462] agent-manager: req[0x125db00, :1.11/org.freedesktop.NetworkManager.SecretAgent/0]: agent registered Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.2108] policy: auto-activating connection 'Haffmans & Neumeister Guest' (5b6f694d-8d28-48be-b714-a3d52f3975f6) Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.2227] device (wlan0): Activation: starting connection 'Haffmans & Neumeister Guest' (5b6f694d-8d28-48be-b714-a3d52f3975f6) Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.2245] device (wlan0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.2319] manager: NetworkManager state is now CONNECTING Oct 16 14:43:05 prusa64-sl1 systemd[1]: systemd-rfkill.service: Succeeded. Oct 16 14:43:05 prusa64-sl1 SL1FW[298]: INFO - root - Embedded logger configuration was used Oct 16 14:43:05 prusa64-sl1 SL1FW[298]: INFO - root - Logging is set to level INFO Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.7492] device (wlan0): set-hw-addr: reset MAC address to 18:93:7F:7E:B3:2E (preserve) Oct 16 14:43:05 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.7810] device (wlan0): supplicant interface state: ready -> disconnected Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.7822] device (wlan0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.7872] device (wlan0): Activation: (wifi) access point 'Haffmans & Neumeister Guest' has security, but secrets are required. Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.7887] device (wlan0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8018] device (wlan0): supplicant interface state: disconnected -> inactive Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8032] device (wlan0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8069] device (wlan0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8125] device (wlan0): Activation: (wifi) connection 'Haffmans & Neumeister Guest' has security, and secrets exist. No new secrets needed. Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8136] Config: added 'ssid' value 'Haffmans & Neumeister Guest' Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8146] Config: added 'scan_ssid' value '1' Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8155] Config: added 'bgscan' value 'simple:30:-80:86400' Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8165] Config: added 'key_mgmt' value 'WPA-PSK' Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8167] Config: added 'auth_alg' value 'OPEN' Oct 16 14:43:05 prusa64-sl1 NetworkManager[278]: <info> [1602852185.8167] Config: added 'psk' value '<hidden>' Oct 16 14:43:05 prusa64-sl1 systemd[1]: run-media-root-sda1.automount: Got automount request for /run/media/root/sda1, triggered by 336 (ls) Oct 16 14:43:05 prusa64-sl1 systemd[1]: Created slice system-systemd\x2dfsck.slice. Oct 16 14:43:05 prusa64-sl1 systemd[1]: Starting File System Check on /dev/sda1... Oct 16 14:43:05 prusa64-sl1 systemd-fsck[337]: sda1: fsck.vfat doesn't exist, not checking file system. Oct 16 14:43:05 prusa64-sl1 systemd[1]: Started File System Check on /dev/sda1. Oct 16 14:43:05 prusa64-sl1 systemd[1]: Mounting /run/media/root/sda1... Oct 16 14:43:06 prusa64-sl1 systemd[1]: Mounted /run/media/root/sda1. Oct 16 14:43:06 prusa64-sl1 NetworkManager[278]: <info> [1602852186.1410] device (wlan0): supplicant interface state: inactive -> scanning Oct 16 14:43:06 prusa64-sl1 wpa_supplicant[331]: wlan0: Trying to associate with SSID 'Haffmans & Neumeister Guest' Oct 16 14:43:06 prusa64-sl1 octo-uploadd.py[299]: rm: cannot remove '/var/sl1fw/projects/._tmp_*': No such file or directory Oct 16 14:43:07 prusa64-sl1 /usr/bin/octo-uploadd.py[299]: API key changed from "asdf" -> "Zpfoxifw" Oct 16 14:43:07 prusa64-sl1 NetworkManager[278]: <info> [1602852187.0258] device (wlan0): supplicant interface state: scanning -> associating Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Bus STARTING Oct 16 14:43:07 prusa64-sl1 /usr/bin/octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Bus STARTING Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: CherryPy Checker: Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: The Application mounted at '/api' has an empty config. Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Started monitor thread '_TimeoutMonitor'. Oct 16 14:43:07 prusa64-sl1 /usr/bin/octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Started monitor thread '_TimeoutMonitor'. Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Started monitor thread 'Autoreloader'. Oct 16 14:43:07 prusa64-sl1 /usr/bin/octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Started monitor thread 'Autoreloader'. Oct 16 14:43:07 prusa64-sl1 SLAGUI[300]: qml: TextField focus changed false Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Serving on http://127.0.0.1:7999 Oct 16 14:43:07 prusa64-sl1 /usr/bin/octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Serving on http://127.0.0.1:7999 Oct 16 14:43:07 prusa64-sl1 octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Bus STARTED Oct 16 14:43:07 prusa64-sl1 /usr/bin/octo-uploadd.py[299]: [16/Oct/2020:14:43:07] ENGINE Bus STARTED Oct 16 14:43:07 prusa64-sl1 systemd[1]: Unmounting /run/media/root/sda1... Oct 16 14:43:07 prusa64-sl1 systemd[1]: run-media-root-sda1.mount: Succeeded. Oct 16 14:43:07 prusa64-sl1 systemd[1]: Unmounted /run/media/root/sda1. Oct 16 14:43:07 prusa64-sl1 SLAGUI[300]: qml: Notification.top changed Oct 16 14:43:07 prusa64-sl1 SLAGUI[300]: WifiNetworkModel::activeConnectionState() - activeConnection is null, returning Unknown Oct 16 14:43:07 prusa64-sl1 SLAGUI[300]: qml: Language: English Oct 16 14:43:07 prusa64-sl1 SLAGUI[300]: qml: Backend did not provide time Oct 16 14:43:07 prusa64-sl1 wpa_supplicant[331]: wlan0: Associated with 00:90:7f:eb:c8:61 Oct 16 14:43:07 prusa64-sl1 wpa_supplicant[331]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Oct 16 14:43:07 prusa64-sl1 wpa_supplicant[331]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE Oct 16 14:43:07 prusa64-sl1 NetworkManager[278]: <info> [1602852187.9552] device (wlan0): supplicant interface state: associating -> 4-way handshake Oct 16 14:43:07 prusa64-sl1 wpa_supplicant[331]: wlan0: WPA: Key negotiation completed with 00:90:7f:eb:c8:61 [PTK=CCMP GTK=CCMP] Oct 16 14:43:07 prusa64-sl1 wpa_supplicant[331]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:90:7f:eb:c8:61 completed [id=0 id_str=] Oct 16 14:43:07 prusa64-sl1 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Oct 16 14:43:07 prusa64-sl1 NetworkManager[278]: <info> [1602852187.9846] device (wlan0): supplicant interface state: 4-way handshake -> completed Oct 16 14:43:07 prusa64-sl1 NetworkManager[278]: <info> [1602852187.9848] device (wlan0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network "Haffmans & Neumeister Guest" Oct 16 14:43:07 prusa64-sl1 NetworkManager[278]: <info> [1602852187.9859] device (wlan0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:07 prusa64-sl1 NetworkManager[278]: <info> [1602852187.9990] dhcp4 (wlan0): activation: beginning transaction (timeout in 45 seconds) Oct 16 14:43:08 prusa64-sl1 SLAGUI[300]: qml: Switch changed to true Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.0163] dhcp4 (wlan0): dhclient started with pid 352 Oct 16 14:43:08 prusa64-sl1 SLAGUI[300]: qml: Switch changed to true Oct 16 14:43:08 prusa64-sl1 avahi-daemon[283]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::a43:e8fc:4834:9b87. Oct 16 14:43:08 prusa64-sl1 avahi-daemon[283]: New relevant interface wlan0.IPv6 for mDNS. Oct 16 14:43:08 prusa64-sl1 avahi-daemon[283]: Registering new address record for fe80::a43:e8fc:4834:9b87 on wlan0.*. Oct 16 14:43:08 prusa64-sl1 dhclient[352]: DHCPREQUEST for 192.168.140.167 on wlan0 to 255.255.255.255 port 67 Oct 16 14:43:08 prusa64-sl1 dhclient[352]: DHCPACK of 192.168.140.167 from 192.168.140.1 Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2313] dhcp4 (wlan0): address 192.168.140.167 Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2315] dhcp4 (wlan0): plen 24 (255.255.255.0) Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2316] dhcp4 (wlan0): gateway 192.168.140.1 Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2317] dhcp4 (wlan0): lease time 28800 Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2318] dhcp4 (wlan0): nameserver '1.1.1.1' Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2319] dhcp4 (wlan0): nameserver '9.9.9.9' Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2320] dhcp4 (wlan0): state changed unknown -> bound Oct 16 14:43:08 prusa64-sl1 avahi-daemon[283]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.140.167. Oct 16 14:43:08 prusa64-sl1 avahi-daemon[283]: New relevant interface wlan0.IPv4 for mDNS. Oct 16 14:43:08 prusa64-sl1 avahi-daemon[283]: Registering new address record for 192.168.140.167 on wlan0.IPv4. Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2494] device (wlan0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2558] device (wlan0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2587] device (wlan0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed') Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.2653] manager: NetworkManager state is now CONNECTED_LOCAL Oct 16 14:43:08 prusa64-sl1 dhclient[352]: bound to 192.168.140.167 -- renewal in 12794 seconds. Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.3020] manager: NetworkManager state is now CONNECTED_SITE Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.3037] policy: set 'Haffmans & Neumeister Guest' (wlan0) as default for IPv4 routing and DNS Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.3091] device (wlan0): Activation: successful, device activated. Oct 16 14:43:08 prusa64-sl1 NetworkManager[278]: <info> [1602852188.3122] manager: NetworkManager state is now CONNECTED_GLOBAL Oct 16 14:43:09 prusa64-sl1 NetworkManager[278]: <info> [1602852189.1552] manager: startup complete Oct 16 14:43:09 prusa64-sl1 systemd[1]: Started Network Manager Wait Online. Oct 16 14:43:09 prusa64-sl1 systemd[1]: Reached target Network is Online. Oct 16 14:43:09 prusa64-sl1 systemd[1]: Starting OTA Updater... Oct 16 14:43:10 prusa64-sl1 systemd[1]: Started OTA Updater. Oct 16 14:43:10 prusa64-sl1 systemd[1]: Reached target Multi-User System. Oct 16 14:43:10 prusa64-sl1 systemd[1]: Starting Update UTMP about System Runlevel Changes... Oct 16 14:43:10 prusa64-sl1 updater[365]: 2020-10-16 14:43:10.731151715+02:00 NOTICE To trigger an on-demand update check, send this process a SIGUSR1 signal. Oct 16 14:43:10 prusa64-sl1 updater[365]: 2020-10-16 14:43:10.731607131+02:00 INFO Scheduled next check in 7m1s. Oct 16 14:43:10 prusa64-sl1 updater[365]: 2020-10-16 14:43:10.731707423+02:00 DEBUG Checking for a new version as requested by ondemandupdate. Oct 16 14:43:10 prusa64-sl1 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Oct 16 14:43:10 prusa64-sl1 systemd[1]: Started Update UTMP about System Runlevel Changes. Oct 16 14:43:10 prusa64-sl1 systemd[1]: Startup finished in 4.414s (kernel) + 13.721s (userspace) = 18.136s. Oct 16 14:43:10 prusa64-sl1 SLAGUI[300]: QEGLPlatformContext: Failed to make temporary surface current, format not updated (3003) Oct 16 14:43:11 prusa64-sl1 SLAGUI[300]: Get(Locale): returned "LANG=en_US.UTF-8" Oct 16 14:43:11 prusa64-sl1 SLAGUI[300]: match: QRegularExpressionMatch(Valid, has match: 0:(0, 16, "LANG=en_US.UTF-8"), 1:(5, 7, "en"), 2:(8, 10, "US"), 3:(11, 16, "UTF-8")) Oct 16 14:43:11 prusa64-sl1 SLAGUI[300]: lang_to_locale: "LANG=en_US.UTF-8" Oct 16 14:43:11 prusa64-sl1 nohup[298]: pygame 1.9.4 Oct 16 14:43:11 prusa64-sl1 nohup[298]: Hello from the pygame community. https://www.pygame.org/contribute.html Oct 16 14:43:11 prusa64-sl1 updater[365]: 2020-10-16 14:43:11.899685757+02:00 DEBUG Received new update Oct 16 14:43:12 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libPrinter - SL1 firmware initializing Oct 16 14:43:12 prusa64-sl1 SL1FW[298]: WARNING - sl1fw.libConfig - Adapting config value fan2Rpm from 3700 to 3300 Oct 16 14:43:12 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libPrinter - HwConfig: /etc/sl1fw/hardware.cfg (/usr/share/factory/defaults/hardware.toml): MCBoardVersion: 6 (None, None, 6) MCversionCheck: True (None, None, True) autoOff: False (False, None, True) blinkExposure: True (None, None, True) calibTowerOffset: 40 (None, None, 40) calibrated: True coverCheck: True (None, None, True) delayAfterExposure: 0 (None, None, 0) delayBeforeExposure: 0 (None, None, 0) fan1Rpm: 1800 (1800, 1800, 2000) fan2Rpm: 3300 (None, 3300, 3300) fan3Rpm: 1000 (None, 1000, 1000) fanCheck: True (None, None, True) layerTowerHop: 0 (None, None, 0) limit4fast: 45 (None, None, 45) measuringMoves: 3 (None, None, 3) microStepsMM: 800.0 mute: False (None, None, False) perPartes: False (None, None, False) pwrLedPwm: 100 (None, None, 100) raw_calibrated: True (True, None, False) raw_tiltdownlargefill: [5, 650, 1000, 4, 1, 0, 64, 3] (None, None, [5, 650, 1000, 4, 1, 0, 64, 3]) raw_tiltdownsmallfill: [5, 0, 0, 6, 1, 0, 0, 0] (None, None, [5, 0, 0, 6, 1, 0, 0, 0]) raw_tiltup: [2, 400, 0, 5, 1, 0, 0, 0] (None, None, [2, 400, 0, 5, 1, 0, 0, 0]) resinSensor: True (None, None, True) screwMm: 4 (None, None, 4) showI18nSelect: True (None, None, True) showUnboxing: False (False, None, True) showWizard: False (False, None, True) stirringDelay: 5 (None, None, 5) stirringMoves: 3 (None, None, 3) tilt: True (None, None, True) tiltFastTime: 5.1 (5.1, None, 5.5) tiltHeight: 5056 (5056, None, 4928) tiltSensitivity: 0 (None, None, 0) tiltSlowTime: 7.9 (7.9, None, 8.0) towerHeight: 121907 (121907, None, 96000) towerSensitivity: 0 (None, 0, 0) trigger: 0 (None, None, 0) tuneTilt: [[5, 650, 1000, 4, 1, 0, 64, 3], [5, 0, 0, 6, 1, 0, 0, 0], [2, 400, 0, 5, 1, 0, 0, 0]] upAndDownEveryLayer: 0 (None, None, 0) upAndDownExpoComp: 0 (None, None, 0) upAndDownUvOn: False (None, None, False) upAndDownWait: 10 (None, None, 10) upAndDownZoffset: 0 (None, None, 0) uvCalibIntensity: 140 (None, None, 140) uvCalibMinIntEdge: 90 (None, None, 90) uvCurrent: 0.0 (None, None, 0.0) uvPwm: 213 (213, 213, 0) uvWarmUpTime: 120 (None, None, 120) whitePixelsThd: 1658880.0 Oct 16 14:43:12 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libHardware - MAC: 10:9c:70:12:9d:2a (checksum 12:ed) Oct 16 14:43:12 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libHardware - SN: CZPX4819X009XK02774 Oct 16 14:43:12 prusa64-sl1 SLAGUI[300]: qml: Backend did not provide time Oct 16 14:43:12 prusa64-sl1 SLAGUI[300]: WifiNetworkModel::activeConnectionState() - activeConnection is null, returning Unknown Oct 16 14:43:12 prusa64-sl1 SLAGUI[300]: qml: Notification.top changed Oct 16 14:43:12 prusa64-sl1 nohup[298]: Home directory not accessible: Permission denied Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libPrinter - SL1 firmware starting, PID: 298 Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libPrinter - System version: 1.3.3 Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - MC_Main - motion controller firmware version: 0.11.5 Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - MC_Main - motion controller firmware for board revision: 6 Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - MC_Main - motion controller board revision: 6c Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - MC_Main - motion controller serial number: CZPX4819X012X102630 Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.AdminCheck - Querying admin enabled Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libNetwork - Downloading https://sl1.prusa3d.com/check-admin/?serial=CZPX4819X009XK02774 Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.AdminCheck - Querying admin enabled Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.libNetwork - Downloading https://sl1.prusa3d.com/check-admin/?serial=CZPX4819X009XK02774 Oct 16 14:43:13 prusa64-sl1 nohup[298]: /usr/lib/python3.7/site-packages/sl1fw/api/printer0.py:86: DeprecationWarning: Call to deprecated function (or staticmethod) devlist. (Use NetworkManager) Oct 16 14:43:13 prusa64-sl1 nohup[298]: cache['value'] = function(self) Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: ERROR - sl1fw.libHardware - Detected broken boot slot !!! Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.AdminCheck - Admin not enabled Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: WARNING - sl1fw.libConfig - File '/var/sl1fw/last_project.toml' not found Oct 16 14:43:13 prusa64-sl1 SL1FW[298]: INFO - sl1fw.AdminCheck - Admin not enabled Oct 16 14:43:13 prusa64-sl1 SLAGUI[300]: qml: Language: None Oct 16 14:43:13 prusa64-sl1 SLAGUI[300]: qml: Language: English Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Wireless active connection changed to " "Connected to Haffmans & Neumeister Guest" " Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Wireless mode changed: NetworkManager::WirelessDevice::Infra Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Active AP changed. Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Wireless mode changed: NetworkManager::WirelessDevice::Infra Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Active AP changed. Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Status: 2 0 "" Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: UpdateInfo: "1.3.3" "1.4.2" "https://sla.prusa3d.com/SL1_firmware/build/sla-update-bundle/stable/linux/1.4.2/1.4.2.prod-key.raucb" "\xE8\xEE\x1C\xAA\xDA&5\xBAN\xFF\xEA\xAAj\xDE""A\x8A\xA0\xBA\xAAy" 1602852190 Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: UpdateInfo: "1.3.3" "1.4.2" "https://sla.prusa3d.com/SL1_firmware/build/sla-update-bundle/stable/linux/1.4.2/1.4.2.prod-key.raucb" "\xE8\xEE\x1C\xAA\xDA&5\xBAN\xFF\xEA\xAAj\xDE""A\x8A\xA0\xBA\xAAy" 1602852190 Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: Status: 2 0 "" Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: UpdateInfo: "1.3.3" "1.4.2" "https://sla.prusa3d.com/SL1_firmware/build/sla-update-bundle/stable/linux/1.4.2/1.4.2.prod-key.raucb" "\xE8\xEE\x1C\xAA\xDA&5\xBAN\xFF\xEA\xAAj\xDE""A\x8A\xA0\xBA\xAAy" 1602852190 Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: UpdateInfo: "1.3.3" "1.4.2" "https://sla.prusa3d.com/SL1_firmware/build/sla-update-bundle/stable/linux/1.4.2/1.4.2.prod-key.raucb" "\xE8\xEE\x1C\xAA\xDA&5\xBAN\xFF\xEA\xAAj\xDE""A\x8A\xA0\xBA\xAAy" 1602852190 Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: qrc:/DelegateSwitch.qml:65: ReferenceError: model is not defined Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: qml: Connected to ws://127.0.0.1:32768 Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: qml: Page <-- home Oct 16 14:43:14 prusa64-sl1 SLAGUI[300]: qml: Replacing page: splash by home Oct 16 14:43:19 prusa64-sl1 SLAGUI[300]: qml: Page <-- settings Oct 16 14:43:19 prusa64-sl1 SLAGUI[300]: qml: Replacing page: home by settings Oct 16 14:43:20 prusa64-sl1 SLAGUI[300]: qml: New firmware notification "1.4.2" Oct 16 14:43:20 prusa64-sl1 SLAGUI[300]: qml: Notification.top changed sw_update_available Oct 16 14:43:20 prusa64-sl1 SLAGUI[300]: qml: Popup window state changed -> sw_update_available Oct 16 14:43:20 prusa64-sl1 SLAGUI[300]: Notify: "sw_update_available" Oct 16 14:43:22 prusa64-sl1 SLAGUI[300]: qml: Notification.top changed Oct 16 14:43:22 prusa64-sl1 SLAGUI[300]: qml: Popup window state changed -> Oct 16 14:43:24 prusa64-sl1 SLAGUI[300]: qml: Page <-- support Oct 16 14:43:24 prusa64-sl1 SLAGUI[300]: qml: Replacing page: settings by support Oct 16 14:43:26 prusa64-sl1 SLAGUI[300]: qml: Page <-- settings Oct 16 14:43:26 prusa64-sl1 SLAGUI[300]: qml: Replacing page: support by settings Oct 16 14:43:28 prusa64-sl1 SLAGUI[300]: qml: Page <-- advancedsettings Oct 16 14:43:28 prusa64-sl1 SLAGUI[300]: qml: Replacing page: settings by advancedsettings Oct 16 14:43:30 prusa64-sl1 SLAGUI[300]: qml: Emitting {"page":"advancedsettings","id":"exportlogstoflashdisk","pressed":true} Oct 16 14:43:30 prusa64-sl1 SLAGUI[300]: qml: Emitting {"page":"advancedsettings","id":"exportlogstoflashdisk","pressed":false} Oct 16 14:43:30 prusa64-sl1 SLAGUI[300]: qml: Page <-- wait Oct 16 14:43:30 prusa64-sl1 SLAGUI[300]: qml: Replacing page: advancedsettings by wait Oct 16 14:43:30 prusa64-sl1 nohup[298]: /run/media/root/sda1/log.CZPX4819X009XK02774.2020-10-16_14-43-30.txt.xz Oct 16 14:43:30 prusa64-sl1 systemd[1]: run-media-root-sda1.automount: Got automount request for /run/media/root/sda1, triggered by 410 (bash) Oct 16 14:43:30 prusa64-sl1 systemd[1]: Mounting /run/media/root/sda1... Oct 16 14:43:30 prusa64-sl1 systemd[1]: Mounted /run/media/root/sda1. Oct 16 14:43:29 prusa64-sl1 systemd-timesyncd[269]: Synchronized to time server for the first time 176.9.18.143:123 (pool.ntp.org). Oct 16 14:43:33 prusa64-sl1 nohup[298]: Data from the specified boot (-39) is not available: No such boot ID in journal Oct 16 14:43:33 prusa64-sl1 nohup[298]: Data from the specified boot (-38) is not available: No such boot ID in journal Oct 16 14:43:41 prusa64-sl1 systemd[1]: systemd-hostnamed.service: Succeeded.

[P-C-R]

@filipkotoucek any Idea?;) Best

[P-C-R]

I can downgrade to 1.3.2 and upgrade to 1.3.3 but every update to 1.4.x fails. tried the RC Versions too.

[P-C-R]

log202022.txt

here my log from today. I tried to downgrade upgrade factory reset etc...

[P-C-R]

another Information. The downgrade to 1.3.0 always fails in the menu. "Update failed"

Sometimes when i try to update to 1.4.2 after rebooting a message appears with "Update failed. Booted from diffrent slot. Please update ASAP" or something like this.

[JakoobCZ]

Hi, it seems this requires a deeper analysis of your hardware, can you please write me an email at info@prusa3d.com and include my name (Jakub Dolezal)? Thanks

[P-C-R]

@JakoobCZ Done!

Best

[P-C-R]

@JakoobCZ till now i got no mail from you. Best

[filipkotoucek]

What is the status of this issue @P-C-R ?

[P-C-R]

A replacement board fixed the issue. Old board is back @prusa