search

prusa3d / PrusaSlicer

G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
https://www.prusa3d.com/prusaslicer/
GNU Affero General Public License v3.0
7.79k stars 1.94k forks source link

Excessive moves during large Lithophane prints #4947

Open Doprintityourself opened 4 years ago

Doprintityourself commented 4 years ago

Version

V2.2.0 and 2.3.0Alpha

Operating system type + version

Win10 64 bit

3D printer brand / version + firmware version (if known)

13 printers of various brands

Behavior

Excessive movement takes enormous ways? (Avoid Crossing Parameter does not help and with this file size and type newer finishes slicing!)

Open file (cannot upload because of size)

and slice: Blank all but Movements

Is this a new feature request? Yes Partially would like to have Time and % for values for movement to have a better interpretation. Same for a count of retracts.

2020-10-23 11_51_55-Niendorf360 V2 0 TLM - PrusaSlicer-2 3 0-alpha1 based on Slic3r

Excessive Movement: I dont know if this is a specific to Lithpophane or Size or shape, but is there no other way or feature to optimize much better the excessive Movcements

Project File (.3MF) where problem occurs

Cannot upload the file it is compressed more than 40 MB of gcode is there any other way to upload?

neophyl commented 4 years ago

what is the size of the .3mf project file when exported from Prusa Slicer ? Instead of the gcode. Project file is usually more usefull anyway and what gets asked for.

Doprintityourself commented 4 years ago

Even if zipped 3mf (63MB)file has about 40MB's so no way to upload here. If somebody will have a look, I would really appreciate and transfer it to a reachable gdrive for example Thanks

Doprintityourself commented 4 years ago

so as it was easy to do I just uploaded the zip here: https://drive.google.com/file/d/1eboHWTzytBChi0Cesoz9fpv3r8PKJmji/view?usp=sharing

bubnikv commented 3 years ago

I think it is the gap fill.